1. Introduzzjoni
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your USX Mount Long Arm Full Motion TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in property damage, injury, or voiding of your warranty.
Immaġni 1.1: Fuqview of the USX Mount Long Arm Full Motion TV Wall Mount, showing the wall plate, articulating arms, and TV mounting brackets, along with included accessories like a level and cable ties.
2. Informazzjoni dwar is-Sigurtà
TWISSIJA: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Do not install into drywall alone. Always ensure the mounting surface can support the combined weight of the mount and your television.
- Ensure all components are present and undamaged before installation. Do not use damaged parts.
- This product is designed for installation on wood studs (16", 18", 20", 24" spacing), solid concrete walls, or brick walls. MA installa ġo drywall waħdu.
- The wall mount is designed to support TVs weighing up to 150 lbs (68 kg). Do not exceed this weight limit.
- Ensure the VESA pattern of your TV is compatible with the mount (200x100mm to 800x400mm).
- Dejjem uża apparat li jsib l-istuds biex issib l-istuds tal-injam b'mod preċiż.
- Żewġ persuni huma rakkomandati għall-installazzjoni biex tiġi żgurata s-sigurtà.
- Wear appropriate safety gear, including eye protection, during installation.
3. Kontenut tal-Pakkett
Verify that all parts are included in your package. If any parts are missing or damaged, contact customer service immediately.
- Assemblea tal-Pjanċa tal-Ħajt
- Parentesi tat-TV (2)
- Kit tal-Ħardwer tal-Immuntar (viti, ankri, woxers, spacers)
- Livell tal-bużżieqa
- Cable Ties (Velcro)
- Mudell ta 'Installazzjoni
- Manwal ta' Istruzzjoni
4. Għodod Meħtieġa (Mhux Inklużi)
- Lapes
- Tornavit tar-ras Phillips
- Drill Elettriku
- Stud Finder (għall-installazzjoni ta' studs tal-injam)
- Masonry Drill Bit (for concrete/brick installation)
- Socket Wrench (13mm)
- Tape Measure
5. Verifika tal-Kompatibbiltà
Before proceeding with installation, ensure your TV and wall are compatible with this mount.
- Daqs tat-TV: Fits most 42-95 inch televisions.
- Piż tat-TV: Jappoġġja televiżjonijiet sa 150 lbs (68 kg).
- Mudell VESA: Compatible with VESA patterns from 200x100mm to 800x400mm.
- Tip ta' Ħajt: Suitable for 16", 18", 20", 24" wood stud walls, solid concrete walls, and brick walls. Mhux għall-installazzjoni ta' drywall biss.
Image 5.1: Illustrates the compatibility of the mount with 16"/18"/20"/24" wood studs, VESA patterns from 200x100mm to 800x400mm, and a maximum weight capacity of 150 lbs. It also shows the mount installed in a corner, highlighting its suitability for such placements.
Image 5.2: Depicts the compatible wall types: concrete wall, wood wall (with studs), and brick wall. A warning indicates not to install on drywall alone.
6. Setup u Installazzjoni
6.1. Attaching TV Brackets to Your TV
- Place your TV face down on a soft, clean surface to prevent scratches.
- Identify the correct diameter and length of screws for your TV's VESA mounting holes. Refer to your TV's manual if unsure.
- Attach the two TV brackets to the back of your TV using the selected screws and washers. If your TV has an uneven back, use spacers as needed to ensure the brackets are flush and secure. Do not overtighten.
6.2. Immuntar tal-Pjanċa tal-Ħajt
- Iddetermina Post tal-Immuntar: Decide on the desired height for your TV. Use the provided installation template to mark the drill holes on the wall.
- Għall-Installazzjoni ta' Studs tal-Injam:
- Use a stud finder to locate the center of the wood studs. Mark the drill holes.
- Drill pilot holes (e.g., 7/32" or 5.5mm) into the center of the marked studs to a depth of approximately 2.75 inches (70mm).
- Attach the wall plate to the wall using the lag bolts and washers. Tighten firmly but do not overtighten.
- For Solid Concrete or Brick Wall Installation:
- Immarka t-toqob.
- Drill pilot holes (e.g., 3/8" or 10mm) into the solid concrete or brick to a depth of approximately 3 inches (75mm).
- Insert concrete anchors into the pilot holes, ensuring they are flush with the wall surface.
- Attach the wall plate to the wall using the lag bolts and washers, screwing them into the anchors. Tighten firmly.
- Use the included bubble level to ensure the wall plate is perfectly horizontal before fully tightening all bolts.
6.3. Hanging the TV on the Wall Plate
- With assistance, carefully lift the TV (with brackets attached) and hook the TV brackets onto the wall plate.
- Kun żgur li t-TV huwa mwaħħal sew mal-pjanċa tal-ħajt.
- Locate the safety screws or locking mechanisms on the TV brackets and secure them to prevent accidental dislodgement.
7. Istruzzjonijiet Operattivi
This full motion TV mount offers various adjustments for optimal viewing.
7.1. Extending and Retracting the Arm
Gently pull the TV away from the wall to extend the arm. Push the TV back towards the wall to retract it. The mount can extend up to 40 inches (101.6 cm) and retract to 3.02 inches (7.67 cm) from the wall.
Image 7.1: Illustrates the mount's ability to extend up to 40 inches from the wall and retract to 3 inches, providing flexibility for viewpożizzjonijiet.
Image 7.2: Shows the long arm extended and swiveled, demonstrating how it allows for optimal viewing positions from various angles in a room.
7.2. Aġġustament tad-dawrien
The TV can swivel up to ±90° left or right, depending on the TV size and its distance from the wall. Gently push or pull the TV to the desired angle.
Image 7.3: Demonstrates the swivel capability of the TV mount, allowing the TV to be angled up to ±90 degrees for flexible viewing. The maximum swivel angle depends on the TV size.
7.3. Aġġustament tal-Mejjel
The TV can be tilted +5° upwards and -12° downwards to reduce glare and achieve a comfortable viewing angle. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then retighten the knobs.
Image 7.4: Illustrates the tilt adjustment feature, showing the TV can tilt +5 degrees up and -12 degrees down. A close-up highlights the friction gear mechanism for smooth adjustment.
7.4. Level Adjustment
After installation, if the TV is not perfectly level, you can adjust it by ±3°. Loosen the leveling screws on the TV brackets, adjust the TV to be level, and then retighten the screws.
Image 7.5: Shows the post-installation level adjustment feature, allowing the TV to be rotated ±3 degrees to ensure it is perfectly horizontal.
8. Manutenzjoni
- Iċċekkja perjodikament il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati u siguri.
- Naddaf il-muntatura b'ċarruta ratba u niexfa. Evita prodotti tat-tindif jew solventi li joborxu.
- Ensure cables are properly managed using the provided cable ties to prevent snagging or damage during adjustments.
9 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-TV mhux livellat wara l-installazzjoni. | Wall plate or TV brackets are slightly off-level. | Use the post-installation level adjustment feature (±3°). Loosen leveling screws, adjust, and retighten. |
| Il-muntatura tħossha maħlula jew instabbli. | Mounting bolts are not fully tightened; incorrect wall type used. | Ensure all wall plate and TV bracket bolts are securely tightened. Verify installation on a compatible wall type (wood stud, concrete, brick). Do not install on drywall alone. |
| Diffikultà biex taġġusta l-inklinazzjoni/dawrien. | Il-pumi/viti tal-aġġustament huma ssikkati wisq. | Loosen the relevant adjustment knobs/screws slightly, make the adjustment, then retighten to secure the position. |
| It-TV ma joqgħodx mal-muntatura. | Incompatible VESA pattern or TV weight/size. | Verify your TV's VESA pattern (200x100mm to 800x400mm) and weight (max 150 lbs) against the mount's specifications. |
10. Speċifikazzjonijiet
- Mudell: B0CZ42ZHCN
- Ditta: MUNTATURA USX
- Tip ta 'Immuntar: Mount Wall
- Tip ta' Moviment: Dawwar, Inklina, Artikola
- Materjal: Azzar Liga
- Kulur: Iswed
- Daqsijiet tat-TV Kompatibbli: 42-95 pulzier
- Kapaċità tal-piż: Sa 150 lbs (68 kg)
- Kompatibbiltà VESA: 200x100mm sa 800x400mm
- Estensjoni mill-Ħajt: 3.02 pulzieri (irtirat) sa 40 pulzieri (estiż)
- Angolu ta 'l-inklinazzjoni: +5° sa -12°
- Angolu tad-dawran: ±90° (max, depends on TV size)
- Aġġustament tal-Livell: ±3° post-installation
- Compatible Stud Spacing: 16", 18", 20", 24"
- UPC: 797505421606
11. Garanzija u Appoġġ għall-Klijent
USX MOUNT has been established for thirty years, offering rich experience and excellent product quality. We provide professional after-sales service. If you encounter any issues or have questions regarding your TV mount, please feel free to contact our professional customer service team. They can provide suitable advice before sale and assist you with any problems after sale.
For support, please refer to the contact information provided with your product packaging or visit the official USX MOUNT websit.
