SENIX HTX6-M1

Manwal tal-Utent tat-Trimmer tas-Siġar mingħajr Fili SENIX X6 60V Max* li Jaħdem bil-Batterija ta' 26" (HTX6-M1)

Model: HTX6-M1 | Brand: SENIX

1. Prodott Aktarview

The SENIX X6 60V Max* Battery Powered 26" Cordless Hedge Trimmer is designed for efficient and precise hedge trimming. It features a powerful brushless motor, durable dual-action blades, and a versatile battery system for extended use.

SENIX X6 60V Max* Cordless Hedge Trimmer with battery, charger, and blade cover

Figure 1: SENIX X6 60V Max* Cordless Hedge Trimmer with included battery, charger, and blade cover.

Karatteristiċi ewlenin:

Diagram of SENIX X6 hedge trimmer highlighting features like 5-year tool warranty, 3-year battery warranty, loop handle, brushless motor, Eco/Max mode, 5-position 180° rotating handle, EasyTrigger start, 1 1/4 inch cut capacity, and 26 inch dual-action cut steel blades.

Figure 2: Detailed diagram of the hedge trimmer's features and specifications.

2. Informazzjoni dwar is-Sigurtà

Always prioritize safety when operating power tools. Read and understand all instructions before use. Failure to follow safety guidelines may result in serious injury.

Prekawzjonijiet Ġenerali tas-Sigurtà:

3. Setup

3.1 Installazzjoni u Iċċarġjar tal-Batterija

  1. Iċċarġjar tal-batterija: Connect the charger to a power outlet. Insert the 60V Max* Lithium-ion battery into the charger. The charge level indicator on the battery will show its current status. Allow the battery to fully charge before first use.
  2. Installazzjoni tal-batterija: Align the battery pack with the battery port on the hedge trimmer. Slide the battery into place until it clicks securely.
  3. It-tneħħija tal-batterija: Press the battery release tab and slide the battery pack out of the tool.
Close-up of the hedge trimmer handle showing the on-board battery gauge and Eco mode selection button.

Figure 3: The X6 battery features a charge level indicator and an Eco mode selection button.

3.2 Attaching the Blade Cover

Always use the provided blade cover when the hedge trimmer is not in use or during storage to prevent accidental contact with the sharp blades.

4. Istruzzjonijiet Operattivi

4.1 Starting and Stopping the Hedge Trimmer

  1. Tibda: Ensure the battery is securely installed. Press the safety switch (located on the handle) with your thumb or finger, then squeeze the trigger. The blades will begin to move.
  2. Biex Tieqaf: Release the trigger. The blades will stop.

4.2 Adjusting the Rotating Handle

The 180° rotating handle allows for comfortable trimming in various orientations. To adjust, locate the handle release mechanism, press it, rotate the handle to one of the 5 desired positions, and ensure it locks securely into place.

Diagram illustrating the 180-degree rotating handle with 5 adjustable positions for the hedge trimmer.

Figure 4: The 180° rotating handle adapts to various trimming needs.

4.3 Tekniki tat-Tqattigħ

Video 1: Official product video demonstrating the SENIX X6 60V Max* Battery Powered 26" Cordless Hedge Trimmer in use.

5. Manutenzjoni

5.1 Kura tax-Xafra

Regularly inspect the blades for sharpness and damage. For optimal performance and longevity, lubricate the blades every couple of weeks with a few drops of oil, especially after extended use.

5.2 Tindif u Ħażna

6 Issolvi l-problemi

Kwistjonijiet Komuni u Soluzzjonijiet:

7. Speċifikazzjonijiet

SpeċifikazzjoniDettall
BrandSENIX
Sors tal-EnerġijaBattery Powered (60V Max*)
Dimensjonijiet tal-Prodott46.1"T x 8.3"W x 8.7"Għ
Piż tal-oġġett8.5 Liri
Tul tax-xafra26 Pulzier
Kapaċità tat-tqattigħ1-1/4 Pulzier
Materjal tax-xafraStainless Steel
Veloċità3400 RPM
Numru tal-Mudell tal-OġġettHTX6-M1
Batteriji1 batterija tal-jone tal-litju meħtieġa (inkluża)

8. Garanzija u Appoġġ

The SENIX X6 60V Max* Battery Powered 26" Cordless Hedge Trimmer is covered by a 5-year limited warranty for the tool u a 3-year limited warranty for the battery and charger.

For technical support, warranty claims, or replacement parts, please contact SENIX Tools directly. Refer to the contact information provided in the original product packaging or on the official SENIX Tools websit.

Dokumenti Relatati - HTX6-M1

Preview SENIX 58V MAX LITHIUM ION Hedge Trimmer Operator's Manual HTX5-M
Operator's manual for the SENIX 58V MAX LITHIUM ION Hedge Trimmer (Model HTX5-M). Contains essential safety instructions, operating procedures, maintenance guidelines, component identification, parts list, and warranty information.
Preview SENIX 20V MAX Lithium-Ion Cordless Pole Hedge Trimmer Operator's Manual
Operator's manual for the SENIX 20V MAX Lithium-Ion Cordless Pole Hedge Trimmer (Models HTPX2-M, HTPX2-M-0), covering safety, assembly, operation, maintenance, and troubleshooting. Includes specifications and warranty information.
Preview SENIX HTX2-M-EU Cordless Hedge Trimmer Instruction Manual
Comprehensive instruction manual for the SENIX HTX2-M-EU Cordless Hedge Trimmer, covering safety, assembly, operation, maintenance, and troubleshooting for domestic use. Includes detailed guidance on safe usage and product care.
Preview SENIX 20V MAX Lithium-Ion Cordless Pole Hedge Trimmer Operator's Manual
This operator's manual provides essential safety instructions, assembly guidance, operating procedures, maintenance tips, and troubleshooting for the SENIX 20V MAX Lithium-Ion Cordless Pole Hedge Trimmer (Models HTPX2-M, HTPX2-M-0).
Preview Manwal tal-Operatur tat-TRIMMER TAL-ĦAXIX MINGĦAJR FIL SENIX 20V MAX
Manwal tal-operatur għas-SENIX 20V MAX Lithium-Ion Cordless Hedge Trimmer, Mudell HTX2-M u HTX2-M-0. Jinkludi struzzjonijiet ta' sigurtà, speċifikazzjonijiet, assemblaġġ, tħaddim, manutenzjoni, issolvi l-problemi, u informazzjoni dwar il-garanzija.
Preview Manwal tal-Istruzzjonijiet tar-Ras tal-Enerġija Mingħajr Fili SENIX PHX6-M1-EU 60V Mingħajr Brushes
Manwal ta' struzzjoni uffiċjali għas-SENIX PHX6-M1-EU 60V Brushless Cordless Power Head. Sib informazzjoni dettaljata dwar is-sigurtà, l-assemblaġġ, it-tħaddim, il-manutenzjoni, u l-ispeċifikazzjonijiet.