Prodott Overview
The ROBOTIME LGC01 Marble Spaceport is a sophisticated motorized wooden 3D puzzle designed for adults. This intricate model allows users to construct a functional marble run system featuring various mechanical elements. Upon completion, marbles can be observed navigating through gravity loops, a gathering and diversion hub, gear crosshatches, Z-shaped lifting stairs, double-deck platforms, and mid-air acceleration vortices. The model can be operated either manually via a hand crank or electrically with a motor, providing a dynamic and engaging experience.
Setup u Assemblea
Assembly of the Marble Spaceport typically takes 5 to 8 hours. The kit includes all necessary components and tools for construction.
Included Components and Tools:
- Precision laser-cut wooden sheets with numbered parts.
- Motor and battery box (USB-C cable and power plug not included, to be prepared by customer).
- Steel marbles.
- Instruction book with step-by-step illustrations.
- Assembly tools: 2 screwdrivers, wax for lubrication, sandpaper, and a nipper for separating plastic pieces.
Image: Contents of the ROBOTIME LGC01 Marble Spaceport kit, including wooden sheets, assembly tools, marbles, and the instruction manual.
Linji Gwida tal-Assemblea:
- Preparazzjoni: Carefully unbox all components. Identify the numbered wooden sheets and familiarize yourself with the instruction manual.
- Tneħħija tal-Parti: Use the provided nipper to carefully detach parts from the wooden sheets. Avoid forcing parts to prevent damage.
- Sanding and Waxing: Lightly sand any rough edges if necessary. Apply the provided wax to moving parts and connection points as indicated in the instructions to ensure smooth operation and reduce friction.
- Kostruzzjoni Pass Pass: Follow the detailed, illustrated instructions provided in the manual. Each step is numbered and shows the exact placement of parts.
- Preċiżjoni: Pay close attention to the orientation and fit of each piece. The parts are designed for a tight, friction-fit assembly, eliminating the need for glue.
- Installazzjoni tal-Mutur: Install the motor and connect the battery box as per the instructions. Ensure correct polarity if using batteries (not included).
- Ittestjar: Periodically test sub-assemblies for smooth movement before proceeding to the next steps.
Patience and attention to detail are crucial for a successful build. If a part does not fit easily, re-check the instructions and ensure the correct part and orientation.
Istruzzjonijiet Operattivi
The ROBOTIME LGC01 Marble Spaceport offers both manual and electric operation modes for the marble lifting mechanism.
Image: The Marble Spaceport highlighting its dual operation modes: electric and manual.
Modalità Manwali:
To operate the marble run manually, locate the hand crank on the side of the model. Turn the crank clockwise to engage the lifting mechanism, which will transport the marbles to the top of the track system. This mode allows for direct control over the marble flow and speed.
Modalità Elettrika:
For continuous operation, connect the motor to a power source using a USB-C cable (not supplied). Once powered, the motor will automatically lift the marbles, allowing them to continuously cycle through the various tracks and mechanisms. The motor operates at approximately 70 RPM, providing a consistent and mesmerizing display.
Image: The fully assembled Marble Spaceport, showcasing its intricate marble pathways and mechanisms.
Ensure marbles are placed correctly at the starting point for optimal flow. Observe the marbles as they navigate through gravity loops, the gathering and diversion hub, gear crosshatches, Z-shaped lifting stairs, double-deck platforms, and mid-air acceleration vortices.
Visual Details of the Marble Run:
Immaġni: Dettaljata view of the diverse track elements and marble pathways.
Image: Close-up of the intricate gears and marble lifting mechanisms.
Nota dwar il-Vidjows: No official product videos from the seller were found to embed in this section.
Manutenzjoni
Proper maintenance ensures the longevity and smooth operation of your Marble Spaceport.
- Tindif: Dust the model regularly with a soft, dry cloth to prevent accumulation in moving parts. Avoid using wet cloths or harsh cleaning agents, as they may damage the wood.
- Lubrikazzjoni: Reapply wax to friction points (e.g., gears, axles, sliding surfaces) if you notice increased resistance or noise during operation. Refer to the assembly instructions for specific areas requiring lubrication.
- Ħażna: Store the model in a dry environment away from direct sunlight and extreme temperature fluctuations to prevent warping or damage to the wooden components.
Issolvi l-problemi
If you encounter issues with your Marble Spaceport, consider the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Marbles get stuck or do not flow freely. |
|
|
| Motor not operating or lifting marbles. |
|
|
| Il-partijiet ma joqogħdux flimkien waqt l-assemblaġġ. |
|
|
Speċifikazzjonijiet tal-Prodott
- Numru tal-Mudell: RBT-LGC01
- Ditta: ROBOTIME
- Dimensjonijiet tal-Prodott: 10.63 x 8.27 x 0.04 inches (assembled dimensions may vary slightly)
- Piż tal-oġġett: 3.54 liri
- Numru ta' Biċċiet: 472
- Età Rakkomandata: 14 snin 'il fuq
- Ħin approssimattiv tal-assemblaġġ: 5-8 sigħat
- Materjal: Selected Basswoods
- Modi ta' Operazzjoni: Manual (hand crank) and Electric (motorized, USB-C powered)
Garanzija u Appoġġ
ROBOTIME offers worry-free assembly support for the LGC01 Marble Spaceport. If you encounter any problems during assembly or operation, or if you have questions regarding missing or damaged parts, please contact ROBOTIME customer service.
For assistance, please refer to the contact information provided in your product packaging or visit the official ROBOTIME websit.
