Manwali+

Elitech LMG-10W, LMC-100A+, ILD-200

Elitech 2-Way Valve Manifold Gauge LMG-10W, Refrigerant Scale LMC-100A+, Infrared Refrigeration Leak Detector ILD-200 User Manual

Model: LMG-10W, LMC-100A+, ILD-200

Introduzzjoni

This user manual provides comprehensive instructions for the Elitech HVAC/R service kit, which includes the Elitech LMG-10W 2-Way Valve Manifold Gauge, the Elitech LMC-100A+ Refrigerant Scale, and the Elitech ILD-200 Infrared Refrigeration Leak Detector. This kit is designed for professional HVAC/R technicians to perform accurate refrigerant charging, recovery, and leak detection tasks.

Elitech HVAC/R Service Kit including manifold gauge, refrigerant scale, and leak detector

Figure 1: Elitech HVAC/R Service Kit components.

Komponenti tal-Prodott

Elitech LMG-10W 2-Way Valve Manifold Gauge

The LMG-10W is a digital manifold gauge designed for precise measurement of pressure, temperature, and vacuum in HVAC/R systems. It features a clear display and robust construction for reliable performance.

  • Kontroll tal-APP: Seamless integration with the Elitech Tools App for remote monitoring and control.
  • Remote Firmware Upgrade: Allows for convenient updates to the device's software.
  • Accurate Tightness Test Results: Provides precise data for system integrity checks.
  • Instant Report Export: Generate and export reports for documentation.
  • Automatic Calculation: Calculates subcooling and superheat automatically.
  • Ħajja twila tal-batterija: Up to 200+ hours of operation.
  • Medda ta' Kejl: -14.5 to 800 psi.
  • Eżattezza: ±0.5% FS.
  • Unitajiet: psi, kg/cm3, kPa, MPa, bar.
  • Firxa tat-Temperatura tax-Xogħol: 14~122°F / -10~50°C.
Elitech LMG-10W digital manifold gauge with hoses and temperature clamps

Figure 2: Elitech LMG-10W Digital Manifold Gauge with included accessories.

Elitech LMG-10W digital manifold gauge display showing various data points and features like APP control and remote firmware upgrade

Figure 3: Key features and display of the Elitech LMG-10W.

Elitech LMG-10W digital manifold gauge dimensions and specifications

Figure 4: Dimensions and detailed specifications of the Elitech LMG-10W.

Elitech LMC-100A+ Refrigerant Scale

The LMC-100A+ is a high-capacity electronic refrigerant charging and recovery scale, essential for accurate refrigerant handling.

  • Kapaċità: Up to 220lbs (100kg).
  • Eżattezza: ±0.05% readings +10g.
  • Unitajiet: Kg/Lb/Oz.
  • Ħajja twila tal-batterija: Sa 40 sigħat.
  • Tifi Awtomatiku: After 10 minutes of inactivity to conserve battery.
Elitech LMC-100A+ refrigerant scale in its protective case

Figure 5: Elitech LMC-100A+ Refrigerant Scale within its carrying case.

Elitech LMC-100A+ refrigerant scale showing battery life and auto shut-off features

Figure 6: Battery life and auto shut-off features of the Elitech LMC-100A+.

Elitech ILD-200 Infrared Refrigeration Leak Detector

The ILD-200 is an advanced infrared leak detector designed to quickly and accurately pinpoint refrigerant leaks in HVAC/R systems.

  • Detects All Halogenated Gases: Including CFCs, HFCs, HCFCs, HCs, HFOs, and mixed refrigerants (e.g., R11, R22, R404a, R410a, R600a, R1234yf, AZ-50, HP62, MP39).
  • Anti-interference & High Precision: Ensures reliable detection in various environments.
  • NDIR Sensor: Provides longer sensor life.
  • Rispons Instant: Quick detection of leaks.
  • Konformità mal-Istandards: Meets SAE-2791 and SAE-2913 standards.
  • Sensittività Massima: 0.1oz/yr.
  • Batterija: 3.7V 3000mAh.
  • Ċertifikat CE: Certified for safety and quality.
Elitech ILD-200 infrared refrigerant leak detector

Figure 7: Elitech ILD-200 Infrared Refrigerant Leak Detector.

Elitech ILD-200 infrared refrigerant leak detector showing features like anti-interference and NDIR sensor

Figure 8: Key features of the Elitech ILD-200.

Elitech ILD-200 infrared refrigerant leak detector dimensions and specifications

Figure 9: Dimensions and detailed specifications of the Elitech ILD-200.

Setup

Before operating the Elitech HVAC/R service kit, ensure all components are properly set up and charged.

  1. Spakkjar: Carefully remove all items from the packaging. Verify that all components listed in the packing list are present and undamaged.
  2. Battery Installation/Charging:
    • LMG-10W: Ensure the manifold gauge is charged or has sufficient battery life. Refer to the individual LMG-10W manual for specific battery type and charging instructions.
    • LMC-100A+: Install batteries as per the scale's instructions.
    • ILD-200: Charge the leak detector using the provided charger until the battery indicator shows full.
  3. App Installation (Optional but Recommended): Download the "Elitech Tools" app from your device's app store (iOS and Android). This app allows for integrated management of Elitech tools.
  4. Initial Calibration/Zeroing:
    • LMG-10W: Power on the manifold gauge. Perform a zero calibration as instructed in its specific manual to ensure accurate pressure readings.
    • LMC-100A+: Place the scale on a flat, stable surface. Power it on and press the "Z/T" button to zero the scale before placing any refrigerant cylinders on it.
    • ILD-200: Allow the leak detector to warm up as per its instructions. Ensure it is in a clean air environment when powered on to establish a baseline.
  5. Hose Connection (LMG-10W): Connect the appropriate refrigerant hoses to the LMG-10W manifold gauge and to the HVAC/R system service ports as required for your specific task (e.g., charging, recovery, evacuation).

Istruzzjonijiet Operattivi

This section provides general operating guidelines for using the Elitech HVAC/R service kit. Always refer to the specific manuals for each device for detailed operational procedures.

Refrigerant Charging/Recovery (Using LMG-10W and LMC-100A+)

  1. Qabbad Manek: Connect the LMG-10W to the HVAC/R system's high and low-pressure service ports using the appropriate hoses. Connect the center hose to the refrigerant cylinder or recovery machine.
  2. Place Cylinder on Scale: Place the refrigerant cylinder on the LMC-100A+ scale. Ensure the scale is zeroed before placing the cylinder.
  3. Qari tal-Monitoraġġ: Use the LMG-10W to monitor system pressures and temperatures. The LMC-100A+ will display the refrigerant weight.
  4. Charge/Recover: Open the manifold valves as required for charging or recovery. Monitor the LMC-100A+ to ensure the correct amount of refrigerant is transferred.
  5. Skonnettja: Once the process is complete, close all valves and carefully disconnect the hoses.

Leak Detection (Using ILD-200)

  1. Qawwa Mixgħul: Turn on the ILD-200 leak detector. Allow it to warm up and self-calibrate in a clean air environment.
  2. Aġġusta s-Sensittività: Adjust the sensitivity setting (Low, Medium, High) based on the suspected leak size and environment. Start with a higher sensitivity for general scanning.
  3. Scan System: Slowly move the probe tip around suspected leak areas (e.g., joints, fittings, valves, coils). The detector will alarm and indicate the presence of refrigerant.
  4. Pinpoint Leak: Once a leak is detected, move the probe slowly back and forth to pinpoint the exact source. The alarm intensity will typically increase as you get closer to the leak.
  5. Ivverifika: After identifying a leak, ventilate the area and re-scan to confirm the leak location.

Manutenzjoni

Proper maintenance ensures the longevity and accuracy of your Elitech HVAC/R service kit.

Issolvi l-problemi

This section addresses common issues you might encounter with your Elitech HVAC/R service kit.

ProblemaKawża PossibbliSoluzzjoni
LMG-10W: Inaccurate pressure readings.Needs zero calibration; sensor contamination; faulty hose connection.Perform zero calibration. Clean sensor if accessible. Check hose connections for leaks or blockages.
LMG-10W: Display mhux mixgħul.Low battery; power button issue.Charge the device. Press and hold the power button firmly.
LMC-100A+: Qari tal-piż mhux preċiż.Scale not zeroed; unstable surface; battery low.Zero the scale before use. Place on a flat, stable surface. Replace batteries.
LMC-100A+: Skala ma tixgħel.Batteriji mejta; installazzjoni ħażina tal-batterija.Ibdel il-batteriji. Kun żgur li l-batteriji jiddaħħlu bil-polarità korretta.
ILD-200: No leak detection/false alarms.Sensor contaminated; low sensitivity setting; strong air currents.Clean sensor tip. Increase sensitivity. Shield the area from drafts.
ILD-200: Apparat mhux mixgħul.Battery depleted; power button issue.Charge the device fully. Press and hold the power button.

Speċifikazzjonijiet

Detailed specifications for each component of the Elitech HVAC/R service kit.

Elitech LMG-10W 2-Way Valve Manifold Gauge

Elitech LMC-100A+ Refrigerant Scale

Elitech ILD-200 Infrared Refrigeration Leak Detector

Garanzija u Appoġġ

Elitech provides dedicated customer support for its products.

For technical questions, troubleshooting assistance, or warranty inquiries, please contact Elitech's US-based customer service team. They are available 24/7 via email or phone.

Refer to the Elitech official webis-sit jew l-imballaġġ tal-prodott għall-aktar informazzjoni ta' kuntatt aġġornata.

Dokumenti Relatati - LMG-10W, LMC-100A+, ILD-200

Preview Elitech ILD Serje Infrared Refriġerant Leak Detector Manwal għall-Utent
Manwal komprensiv għall-utent għad-ditekters tat-tnixxija tar-refriġerant bl-infra-aħmar tas-serje Elitech ILD (ILD-100, ILD-200, ILD-300), li jkopri l-ispeċifikazzjonijiet, it-tħaddim, il-manutenzjoni u l-karatteristiċi. Tgħallem kif tiskopri b'mod effettiv tnixxijiet ta' refriġerant b'dan l-apparat avvanzat.
Preview Manwal tal-Utent tad-Ditekter tat-Tnixxijiet bl-Infra-aħmar Elitech ILD-100/ILD-200/ILD-300
Manwal tal-utent għad-ditekters tat-tnixxija tar-refriġerant bl-infra-aħmar tas-serje Elitech ILD (ILD-100, ILD-200, ILD-300). Jipprovdi informazzjoni dettaljata dwar it-tħaddim, l-ispeċifikazzjonijiet, il-karatteristiċi, u l-manutenzjoni għal skoperta preċiża ta' tnixxija tar-refriġerant.
Preview Manwal tal-Utent tal-Gauge tal-Manifold Diġitali Intelliġenti Elitech MS-100 PLUS
Manwal komprensiv għall-utent għall-Elitech MS-100 PLUS Smart Digital Manifold Gauge, li jkopri l-introduzzjoni tal-prodott, l-istruzzjonijiet tas-sigurtà, aktar minnview, funzjonijiet tal-buttuni, parametri tekniċi, u gwidi ta' tħaddim rapidu għal sistemi ta' refriġerazzjoni u HVAC.
Preview Manwal tal-Utent tad-Ditekter tat-Tnixxijiet Elitech IR-200 b'Dijodi Infra-aħmar u Msaħħan
Manwal komprensiv għall-utent għall-Elitech IR-200, ditekter tat-tnixxija b'żewġ sensuri li jinkludi teknoloġija ta' dijodi infra-aħmar u msaħħna. Tgħallem dwar l-ispeċifikazzjonijiet, it-tħaddim, il-manutenzjoni u l-karatteristiċi tiegħu għad-detezzjoni ta' tnixxijiet ta' refriġerant.
Preview Elitech WJL-6000S Corona Detector Manwal għall-Utent
Manwal tal-utent għad-Detector tal-Korona Elitech WJL-6000S, li jipprovdi struzzjonijiet dettaljati dwar it-tħaddim, id-detezzjoni, is-soluzzjoni tal-problemi, u l-manutenzjoni għad-detezzjoni ta' tnixxija ta' refriġerant f'diversi sistemi.
Preview Manwal tal-Utent tal-Gauge tal-Manifold Diġitali tas-Serje MS ta' Elitech
Manwal tal-utent għall-gauge diġitali tal-manifold tas-Serje MS ta' Elitech, li jkopri d-deskrizzjoni tal-prodott, dettalji ġeneraliview, funzjonijiet tal-buttuni, speċifikazzjonijiet, gwida ta' bidu rapidu, passi ta' operazzjoni, applikazzjonijiet intelliġenti, u manutenzjoni.