LILYGO T-BeamSUPREME Meshtastic ESP32-S3 LoRa L76K GPS WiFi Bluetooth Module Instruction Manual

Prodott Overview

The LILYGO T-BeamSUPREME is a versatile development board designed for Meshtastic applications, integrating an ESP32-S3 microcontroller with LoRa, GPS, WiFi, and Bluetooth capabilities. It comes pre-flashed with Meshtastic firmware for immediate use.

MCU: ESP32-S3FN8 Dual-core LX7 microprocessor for efficient processing.
Firmware: Pre-burned with Meshtastic Firmware for out-of-the-box mesh networking.
Komponenti ewlenin: Composed of ESP32-S3, LoRa SX1262, and L76K GPS chip for robust communication and positioning.
Konnettività: Integrated WiFi and Bluetooth for flexible connectivity options.
Wiri: Features a 1.3-inch SH1106 OLED for clear information display.

LILYGO T-BeamSUPREME MCU, Wireless, Display, and LoRa Module Details

Detailed diagram illustrating the MCU, wireless connectivity, display specifications, and LoRa SX1262 module features of the LILYGO T-BeamSUPREME.

Komponenti Inklużi

The LILYGO T-BeamSUPREME package includes the essential components to get started with your development board.

Blu-ray (This item is listed in the 'whats_in_the_box' section of the product data. Please note that this may be a data entry error and typically refers to a Blu-ray disc or player, which is unlikely for a development board. Users should verify actual contents upon receipt.)

Image showing the LILYGO T-BeamSUPREME development board, antenna, and various small accessories included in the kit.

Setup

Follow these steps for initial setup of your LILYGO T-BeamSUPREME development board.

Qabbad l-Antenna: Securely attach the provided antenna to the SMA connector on the board. Ensure it is finger-tight to prevent signal loss.
Daħħal il-batterija: If using battery power, insert a compatible 18650 battery into the battery holder on the underside of the board, observing correct polarity (+/-).
Initial Power/Connection: Connect the board to your computer using a USB-C cable. This will power the device and allow for firmware flashing or configuration.
Firmware Installation (Meshtastic): The device comes pre-flashed with Meshtastic firmware. For updates or custom firmware, refer to the official Meshtastic documentation or LILYGO's GitHub repository.
Modulu GPS: The L76K GPS module is integrated. Ensure clear line of sight to the sky for optimal GPS signal acquisition.

Close-up of antenna connection on LILYGO T-BeamSUPREME

A close-up view of the LILYGO T-BeamSUPREME board, highlighting the antenna connection point. Ensure the antenna is securely fastened.

LILYGO T-BeamSUPREME board with battery holder

The LILYGO T-BeamSUPREME development board shown with its integrated 18650 battery holder and attached antenna.

Official LILYGO video demonstrating the process of installing Meshtastic firmware onto a LILYGO T-Echo device. The steps are generally applicable to other LILYGO T-Beam devices.

Official LILYGO video explaining how the T-Beam device connects to the Helium platform, detailing the necessary configuration steps.

Istruzzjonijiet Operattivi

The LILYGO T-BeamSUPREME, with Meshtastic firmware, enables off-grid communication and data transmission. Here are general operating guidelines:

Qawwa Mixgħul: Once the battery is inserted or USB power is connected, the device should power on automatically. The OLED display will show Meshtastic status.
Meshtastic App Connection: Use the Meshtastic mobile application (available for Android and iOS) to connect to your T-BeamSUPREME via Bluetooth. This allows you to send/receive messages and configure device settings.
Tibgħat Messaġġi: Through the Meshtastic app, you can compose and send text messages to other Meshtastic nodes within range. The messages will route through the mesh network.
Traċċar GPS: The integrated L76K GPS module provides location data. This data can be transmitted over the Meshtastic network for tracking purposes.
Monitoraġġ: The OLED display provides real-time information such as signal strength, battery level, and received messages.

Official Meshology video demonstrating an ESP32 LoRa V3 N32 device used in a DIY door monitoring project. This illustrates a practical application of the development board's capabilities.

Official LILYGO video showcasing the TTGO LoRa32 V2.1_1.6 Version 915Mhz ESP32 LoRa Module in operation, demonstrating its functionality and display.

Speċifikazzjonijiet Tekniċi

MCU	ESP32-S3FN8 Dual-core LX7 microprocessor
Tip bla fili	Bluetooth, Wi-Fi (2.4 GHz)
Modulu LoRa	SX1262 (915Mhz)
Modulu GPS	L76K
Wiri	1.3-inch SH1106 OLED (128x64 resolution)
RAM	LPDDR3
Kapaċità tal-Ħżin tal-Memorja	8 MB
Piż tal-oġġett	3.84 uqija
Dimensjonijiet tal-Pakkett	7.4 x 4.17 x 2.56 pulzieri

LILYGO T-BeamSUPREME Pinout Diagram and Component Overview

Detailed diagram showing the pinout, main components, and various interfaces of the LILYGO T-BeamSUPREME development board.

Comprehensive pinmap for the LILYGO T-BEAM-S3Core, detailing connections for ESP32-S3, LoRa, GPS, PMU, and antenna ports.

L76K vs Ublox MAX-M10S-00B GNSS Comparison

Comparison table highlighting the properties, positioning support, GNSS parallelism, update rate, and oscillator differences between L76K and Ublox MAX-M10S-00B GNSS modules.

Issolvi l-problemi

If you encounter issues with your LILYGO T-BeamSUPREME, consider the following common troubleshooting steps:

Ebda Qawwa: Ensure the USB-C cable is securely connected and providing power, or that the 18650 battery is correctly inserted with proper polarity and charged.
No OLED Display: Verify that the OLED display is correctly connected to the board. If the display is not lighting up, check power connections and ensure the firmware supports the specific display model.
No LoRa/Meshtastic Connectivity: Check that the antenna is securely attached. Ensure both transmitting and receiving devices are configured to the same frequency band (e.g., 915Mhz) and channel settings. Verify that the Meshtastic firmware is correctly installed and updated.
Kwistjonijiet tas-Sinjal tal-GPS: Kun żgur li l-apparat għandu żona ċara u mingħajr ostakli view of the sky. GPS signal acquisition can take several minutes, especially on first use or after a long period of inactivity.
Problemi ta' Konnessjoni Bluetooth: Ensure Bluetooth is enabled on your mobile device and the Meshtastic app has the necessary permissions. Try restarting both the T-BeamSUPREME and your mobile device.
Komponenti Fraġli: Handle the board with care. Consider using a protective case, especially if the device will be used in outdoor or rugged environments, to prevent damage to exposed components.

Garanzija u Appoġġ

For warranty information, technical support, or further inquiries regarding your LILYGO T-BeamSUPREME, please refer to the following resources:

Appoġġ tal-Manifattur: Contact LILYGO directly for product-specific support.
Riżorsi onlajn: Visit the official LILYGO GitHub repository for documentation, code examples, and community support: github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series.
Meshtastic Community: For Meshtastic-specific questions and community support, visit the official Meshtastic website and forums.

	Gwida għall-Utent ta' LILYGO T-BEAM-S3: Konfigurazzjoni u Żvilupp Din il-gwida għall-utent tipprovdi struzzjonijiet komprensivi għat-twaqqif tal-bord tal-iżvilupp LILYGO T-BEAM-S3. Tgħallem kif tikkonfigura l-ambjent tas-softwer bl-użu tal-Arduino IDE, tikkonnettja l-bord, u tutilizza l-kapaċitajiet Wi-Fi, BLE, GPS, u LoRa tiegħu għal proġetti tal-IoT.
	Gwida għall-Utent tal-LILYGO T-Deck ESP32-S3 għall-Iżvilupp tal-Arduino Gwida komprensiva għall-utent għall-bord tal-iżvilupp LILYGO T-Deck, li tiddeskrivi s-setup tal-Arduino IDE, il-konfigurazzjoni tal-ESP32-S3, il-funzjonalità Wi-Fi u LoRa, u r-referenza tal-kmand SSC għal applikazzjonijiet tal-IoT.
	Gwida għall-Utent tal-LILYGO T3-S3 Gwida għall-utent għall-bord tal-iżvilupp LILYGO T3-S3, li tkopri s-setup tal-Arduino IDE, il-konfigurazzjoni, l-ittestjar, u r-referenza tal-kmand Wi-Fi għall-modulu ESP32-S3.
	Gwida għall-Utent tal-LILYGO T-WATCH S3: Konfigurazzjoni u Żvilupp bl-Arduino Tgħallem kif tiżviluppa applikazzjonijiet tal-IoT bil-LILYGO T-WATCH S3. Din il-gwida tkopri t-twaqqif tal-Arduino IDE, l-ipprogrammar tal-ESP32-S3, u l-użu tal-kmandi SSC, ipprovduti minn Xinyuan.
	Gwida għall-Utent tal-LILYGO Mini E-Paper-S3 Gwida komprensiva għall-utent għall-bord tal-iżvilupp LILYGO Mini E-Paper-S3. Tkopri s-setup, l-integrazzjoni tal-Arduino IDE, l-iżvilupp tal-firmware, u referenza tal-kmand Wi-Fi għal applikazzjonijiet tal-IoT.
	Gwida għall-Utent tal-Bord tal-Iżvilupp LILYGO T-Display-S3 Pro ESP32-S3 Gwida komprensiva għall-utent għall-bord tal-iżvilupp LILYGO T-Display-S3 Pro ESP32-S3. Tkopri s-setup tal-Arduino IDE, l-installazzjoni tas-softwer, il-konfigurazzjoni, il-konnessjoni tal-bord, u referenza għal kmandi komuni tal-Wi-Fi SSC.

LILYGO L76K Version