Manwal ta' Istruzzjonijiet għat-Tinda Instant Cabin CORE għal 10 Persuni b'Dwal LED

1. Introduzzjoni u Fuqview

This manual provides detailed instructions for the setup, operation, maintenance, and care of your CORE 10 Person Instant Cabin Tent with LED Lights. This tent features an instant hub technology for quick setup, integrated LED lighting, and H20 Block Technology for weather protection.

Image 1.1: The CORE 10 Person Instant Cabin Tent fully assembled.

2. Informazzjoni dwar is-Sigurtà

• Keep all flame and heat sources away from this tent fabric. The tent is made of flame-resistant fabric, but it is not fireproof.
• Do not use fuel-burning devices inside the tent. Ensure adequate ventilation to prevent carbon monoxide poisoning.
• Avoid setting up the tent under trees during storms or lightning.
• Secure the tent properly with all stakes and guylines to prevent collapse in windy conditions.
• Keep children away from the tent during setup and takedown to prevent injury from poles or stakes.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti qabel tibda s-setup:

• Tent body with pre-attached poles
• Rainfly with attached guylines
• Room divider
• Battery compartment (requires 4D batteries, not included)
• Tent stakes
• Ġorr borża

Image 3.1: All included components of the tent.

4. Istruzzjonijiet ta' Setup

The CORE Instant Cabin Tent is designed for a quick and easy setup, typically within 2 minutes.

1. Unfold the Tent: Poġġi l-korp tat-tinda ċatt fuq is-sala magħżula tiegħekampsite, ensuring the floor is spread out evenly.
2. Estendi l-Poli: Extend the pre-attached poles until they are fully straight.
3. Lock Poles into Place: Lift the center hub and extend each leg of the tent until the poles click and lock into their upright position. This forms the tent's frame.
4. Waħħal ir-Rainfly: Drape the rainfly over the tent. Secure it by attaching the buckles or clips on the rainfly to the corresponding points on the tent body. Extend and stake out the attached guylines for added stability and weather protection.
5. Stake the Tent: Secure the tent corners and all guylines to the ground using the provided tent stakes. Ensure stakes are angled away from the tent for maximum hold.
6. Optional Room Divider: If desired, attach the room divider inside the tent to create two separate rooms.

5. Istruzzjonijiet Operattivi

5.1. Built-in LED Lighting System

The tent features integrated LED lights within the ceiling poles, controlled by a wall-mounted switch.

1. Installa Batteriji: Open the battery compartment (located near the light switch) and insert 4D batteries (not included), ensuring correct polarity.
2. Sib is-Swiċċ: The wall-mounted light switch is accessible from both the inside and outside of the tent.
3. Agħżel il-Modalità: Press the switch to cycle through the three lighting modes: Għoli (brightest illumination), Baxx (reduced brightness), and Dawl bil-lejl (soft, ambient glow). The light-diffusing fabric ensures even illumination.

Image 5.1: LED light control switch.

Image 5.2: Tent interior illuminated by LED lights.

5.2. Adjustable Ventilation

The tent is equipped with lower air intake vents to draw in cool air and a mesh ceiling to allow hot air to escape, promoting air circulation. Adjust window and door coverings as needed to optimize airflow.

5.3. Room Divider

Utilize the included room divider to create two distinct living or sleeping areas within the tent for added privacy.

5.4. Electrical Cord Access Port

An electrical cord access port is provided for convenient and safe routing of power cords into the tent. Ensure the port is fully zipped when not in use to maintain weather protection.

Image 5.3: Electrical cord access port.

6. Manutenzjoni u Kura

• Tindif: Hand wash the tent fabric with mild soap and water. Do not use harsh detergents, bleach, or machine wash. Rinse thoroughly.
• Tnixxif: Always ensure the tent is completely dry before packing it away to prevent mildew and fabric degradation. Air dry in a shaded area.
• Spezzjoni: Regularly inspect poles for damage, fabric for tears, and zippers for smooth operation. Repair minor issues promptly to extend the tent's lifespan.
• Interessi: Clean stakes after each use and store them in their designated bag.

7. Ħażna

After cleaning and ensuring the tent is completely dry, fold it neatly and place it into the carry bag. Store the tent in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing heavy items on top of the tent bag.

8 Issolvi l-problemi

• Tent Not Standing Firmly: Ensure all poles are fully extended and locked into place. Verify that all stakes are securely driven into the ground and guylines are taut.
• Dwal LED ma Jaħdmux: Check if 4D batteries are correctly installed in the battery compartment and are not depleted. Ensure the light switch is pressed firmly.
• Tnixxija tal-Ilma: Confirm the rainfly is correctly positioned and fully extended over the tent, with all guylines staked out. Check for any tears in the fabric or seam tape.
• Kondensazzjoni Ġewwa t-Tinda: Increase ventilation by opening lower vents and adjusting window coverings. Ensure the mesh ceiling is clear.

9. Speċifikazzjonijiet

Image 9.1: Tent dimensions diagram.

10. Garanzija u Appoġġ

This CORE tent is covered by a Garanzija Limitata ta' 1 Snin mid-data tax-xiri. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.

For warranty claims, technical support, or replacement parts, please contact CORE customer service. Keep your proof of purchase for warranty validation.

For further assistance, please visit the official CORE webis-sit jew irreferi għall-informazzjoni ta' kuntatt ipprovduta mad-dokumentazzjoni tax-xiri tiegħek.