Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your microSHIFT TS38 Thumb-Tap Shifter Set. Designed for bicycles with 7-speed rear drivetrains and triple chainrings, these shifters offer light shifting effort and an easy-to-read gear indicator for a reliable cycling experience. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your shifters.
Prodott Overview
This image displays the microSHIFT TS38 Thumb-Tap Shifter Set. The left shifter is designed for triple chainrings, indicated by the '1-3' gear display, while the right shifter is for 7-speed rear drivetrains, indicated by the '1-7' gear display. Both shifters feature ergonomic thumb triggers for operation.
The microSHIFT TS38 shifters are engineered for compatibility with Shimano 7-speed drivetrains. They feature an optical gear indicator for quick reference of your current gear and ergonomic thumb triggers for comfortable and precise shifting.
Setup u Installazzjoni
Proper installation is crucial for optimal performance. If you are unsure about any steps, it is recommended to seek assistance from a qualified bicycle mechanic.
- Immuntar tal-manubriju:
- Ħoll il-clamp bolts on both shifters.
- Slide the shifters onto your bicycle's handlebars, positioning them comfortably within reach of your thumbs. Ensure they do not interfere with brake levers or other handlebar accessories.
- Once positioned, tighten the clamp bolts securely. Do not overtighten.
- Rotot tal-kejbil:
- Ensure your bicycle's derailleur cables are in good condition and properly routed through the frame's cable guides.
- Insert the shift cable into the designated port on each shifter.
- Route the cable through the shifter body and out the cable exit point.
- Connecting to Derailleurs:
- For the right (rear) shifter, connect the cable to the rear derailleur's cable anchor bolt.
- For the left (front) shifter, connect the cable to the front derailleur's cable anchor bolt.
- Pull the cable taut and secure it with the anchor bolt. Leave some slack for fine-tuning.
- Aġġustament Inizjali:
- With the cables connected, perform initial adjustments to the derailleur limit screws and cable tension. Refer to your bicycle's derailleur manual for specific adjustment procedures.
- Shift through all gears to ensure smooth and precise operation. Use the barrel adjusters on the shifters or derailleurs for fine-tuning cable tension.
Operating Your Shifters
The microSHIFT TS38 shifters are designed for intuitive operation using thumb-tap actions.
- Shifting Up (Higher Gear/Larger Chainring):
- To shift to a higher gear on the rear cassette (smaller cog) or a larger chainring on the front, firmly press the main thumb lever (the larger lever) forward.
- The optical gear indicator will show the new gear position.
- Shifting Down (Lower Gear/Smaller Chainring):
- To shift to a lower gear on the rear cassette (larger cog) or a smaller chainring on the front, press the smaller thumb lever (release lever) with your thumb.
- The optical gear indicator will show the new gear position.
- Indikatur tal-ger:
- The clear window on top of each shifter displays your current gear.
- The right shifter indicates the rear cassette gear (1-7).
- The left shifter indicates the front chainring position (1-3 for triple).
Always pedal forward while shifting to ensure smooth gear changes and prevent damage to your drivetrain components.
Manutenzjoni
Regular maintenance will extend the life and performance of your shifters.
- Tindif:
- Periodically wipe down the shifter bodies with a clean, damp drapp biex tneħħi l-ħmieġ u l-ħmieġ.
- Avoid using harsh chemicals or solvents, as they may damage the plastic components or finish.
- Lubrikazzjoni:
- Apply a small amount of light lubricant to the pivot points of the shifter levers and the exposed sections of the shift cables where they enter the shifter body.
- This helps maintain smooth operation and prevents corrosion.
- Spezzjoni tal-Cable:
- Regularly inspect shift cables for fraying, kinks, or corrosion. Damaged cables can lead to poor shifting performance.
- Replace cables and housing as needed, typically annually or more frequently depending on riding conditions.
- Verifika Ġenerali:
- Ensure all mounting bolts are secure.
- Check for any excessive play in the levers.
Issolvi l-problemi
If you encounter issues with your shifters, try these common solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Shifting is slow or hesitant | Insufficient cable tension, dirty/frayed cable, stiff housing, dirty derailleur | Adjust cable tension using barrel adjusters. Clean or replace cables and housing. Clean and lubricate derailleur. |
| Gears skip or jump | Incorrect cable tension, bent derailleur hanger, worn chain/cassette | Fine-tune cable tension. Check and align derailleur hanger. Inspect and replace worn drivetrain components. |
| Shifter lever feels stiff or sticky | Lack of lubrication, internal dirt/debris | Apply light lubricant to pivot points. Clean shifter internals if accessible (consult a mechanic if unsure). |
| Cannot shift into highest/lowest gear | Derailleur limit screws incorrectly set | Adjust the high (H) and low (L) limit screws on the derailleur. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | TS38-7 |
| Drivetrain Speeds | 7-il Veloċità (Wara) |
| Front Chainring Compatibility | Tripla |
| Rear Derailleur Compatibility | Shimano Mountain |
| Stil ta' Shifter | Thumb-Tap |
| Materjal | Akrilonitril Butadiene Styrene (ABS), Aluminju |
| Piż tal-oġġett | Madwar 16-il uqija (0.45 kg) |
| UPC | 657993356548 |
Garanzija u Appoġġ
microSHIFT products are manufactured to high standards and are designed for durability and performance. For specific warranty information regarding your TS38 Thumb-Tap Shifter Set, please refer to the warranty card included with your purchase or visit the official microSHIFT website. For technical support, replacement parts, or further assistance, please contact microSHIFT customer service through their official channels.
Websit: www.microshift.com (Jekk jogħġbok iċċekkja l-uffiċjal websit għall-aktar informazzjoni ta' kuntatt u riżorsi ta' appoġġ aġġornati.)
