Manwal tal-Utent tal-Pannell tal-Kontroll tal-Allarm ABUS AZAA10000 Terxon SX

1. Introduzzjoni

This manual provides essential information for the installation, operation, and maintenance of your ABUS AZAA10000 Terxon SX Alarm Control Panel. Please read these instructions carefully before attempting to install or operate the system to ensure proper functionality and safety.

The ABUS AZAA10000 Terxon SX is a wired alarm control panel designed to provide reliable security for your premises. It integrates various security components to detect intrusions and alert users.

2. Informazzjoni dwar is-Sigurtà

• Sigurtà Elettrika: Installation and wiring should only be performed by qualified personnel. Disconnect power before servicing the unit.
• Immaniġġjar tal-batterija: The system uses a lead-acid battery. Handle with care. Do not short-circuit, puncture, or expose to extreme temperatures. Dispose of batteries according to local regulations.
• Kundizzjonijiet Ambjentali: Install the control panel in a dry, protected area, away from direct sunlight, extreme temperatures, and high humidity.
• Użu Awtorizzat: Use the system only for its intended purpose as an alarm control panel.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:

• ABUS AZAA10000 Terxon SX Panel tal-Kontroll tal-Allarm
• Keypad (LCD control panel)
• Installation hardware (screws, anchors)
• Manwal għall-Utent (dan id-dokument)
• Kejbil tal-enerġija/adapter
• Lead-acid battery (may be pre-installed or separate)

4. Prodott Aktarview

The ABUS AZAA10000 Terxon SX system consists of a main control panel unit and a separate LCD keypad for user interaction.

Figura 1: ABUS AZAA10000 Terxon SX Alarm Control Panel (right) and LCD Keypad (left). The control panel houses the main electronics and battery, while the keypad provides the interface for arming, disarming, and system configuration.

Figura 2: Ieħor view of the ABUS AZAA10000 Terxon SX Alarm Control Panel and LCD Keypad, highlighting the compact design of the keypad for discreet placement.

4.1 Panel tal-Kontroll

The main control panel unit is the central processing unit of the alarm system. It manages all connected sensors, communicates with the keypad, and triggers alarms. It typically includes terminals for wired connections, a power input, and a compartment for the backup battery.

4.2 Tastiera LCD

The LCD keypad serves as the primary user interface. It features a display for status messages, a numeric keypad for entering codes, and function buttons for arming, disarming, and accessing system menus. Compatible devices include the LCD control panel, relay board, and optional plug-in relay module.

5. Setup u Installazzjoni

Proper setup and installation are crucial for the reliable operation of your alarm system. It is recommended that installation be performed by a certified security technician.

5.1 Immuntar tal-Panew tal-Kontroll

1. Agħżel Post: Choose a secure, discreet, and centrally located area, preferably indoors, away from extreme temperatures and moisture. Ensure it is accessible for maintenance but not easily tampered ma.
2. Immuntar Sikur: Use appropriate screws and anchors (type: screw-in) to firmly attach the control panel to a wall. Ensure the mounting surface can support the unit's weight (2.8 kg).

5.2 Immuntar tat-Tastiera

1. Agħżel Post: Install the keypad near the main entry/exit point of the protected area, at a convenient height for all users.
2. Immuntar Sikur: Mount the keypad securely to the wall using the provided hardware.

5.3 Konnessjonijiet tal-Wiring

The ABUS AZAA10000 Terxon SX is a wired system. All connections (sensors, sirens, power, keypad) must be made using appropriate wiring. Refer to the detailed wiring diagrams provided in the separate installation guide for specific terminal connections.

• Konnessjoni tal-Enerġija: Connect the control panel to a 230 Volt AC power source.
• Konnessjoni tal-batterija: Connect the lead-acid backup battery to the designated terminals inside the control panel.
• Konnessjoni tat-tastiera: Connect the keypad to the control panel using the specified wired connection.
• Konnessjonijiet tas-Sensor: Connect all wired sensors (e.g., motion detectors, door/window contacts) to the appropriate zone inputs on the control panel.
• Siren/Strobe Connections: Connect external sirens and strobe lights to the alarm outputs.

5.4 L-Inizjali Tixgħel u l-Konfigurazzjoni

1. Applika l-Enerġija: Once all wiring is complete and checked, connect the main power supply.
2. Inizjalizzazzjoni tas-Sistema: The system will perform a self-test. Follow the on-screen prompts on the keypad.
3. Program Master Code: Set a unique master user code. This code is essential for system programming and advanced functions.
4. Zone Programming: Configure each connected sensor zone according to its type (e.g., entry/exit, interior, 24-hour).
5. Kodiċi tal-Utent: Create additional user codes for family members or authorized personnel.

6. Istruzzjonijiet Operattivi

This section covers the basic daily operation of your ABUS AZAA10000 Terxon SX Alarm Control Panel.

6.1 L-armar tas-Sistema

• Full Arming (Away Mode): Ensures all zones are active. Enter your user code and press the "Arm" button (or equivalent). The system will provide an exit delay.
• Partial Arming (Stay Mode): Activates perimeter zones while allowing movement within interior zones. Enter your user code and press the "Stay" or "Partial Arm" button.

6.2 Diżarmar tas-Sistema

To disarm the system, enter your user code when prompted (e.g., upon entry during the entry delay) or press the "Disarm" button (or equivalent) and then enter your code.

6.3 Alarm Events

When an alarm is triggered, the system will activate sirens (audio) and potentially strobe lights (visual). The keypad display will indicate the triggered zone. To silence the alarm, disarm the system using your user code.

6.4 Status tas-Sistema

The LCD keypad displays the current system status, including armed/disarmed state, open zones, and any system faults (e.g., low battery, communication errors).

7. Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-affidabbiltà tas-sistema ta' allarm tiegħek.

• Iċċekkja tal-batterija: The lead-acid backup battery should be checked periodically (e.g., annually) and replaced every 3-5 years, or when the system indicates a low battery fault.
• Tindif: Gently wipe the keypad and control panel housing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ittestjar tas-Sensor: Periodically test all connected sensors (e.g., motion detectors, door/window contacts) to ensure they are functioning correctly.
• Aġġornamenti tas-Software: While specific software update information is not available, it is good practice to consult with your installer or ABUS support for any recommended firmware updates.

8 Issolvi l-problemi

This section addresses common issues you might encounter with your ABUS AZAA10000 Terxon SX Alarm Control Panel.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact ABUS technical support or your certified installer.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

ABUS provides a warranty period of at least 2 snin after purchase for this product, ensuring proper functionality and protection against defects.

Spare parts availability is guaranteed for 1 sena.

For technical assistance, warranty claims, or further information, please contact your authorized ABUS dealer or visit the official ABUS websit għal riżorsi ta' appoġġ.