1. Prodott Aktarview
The Antec C5 ARGB is a mid-tower ATX PC case designed for high-performance builds, featuring a full-view tempered glass design and extensive cooling capabilities. It includes seven pre-installed ARGB PWM fans and a built-in fan controller, offering both aesthetic appeal and efficient thermal management. The dual-chamber design provides optimized space for components and cable management.
Image: The Antec C5 ARGB PC case showcasing its full-view tempered glass panels and internal components with vibrant ARGB lighting.
2. Karatteristiċi ewlenin
- Sħiħ-View Ħġieġ ittemprat: Seamless edge design on front and side panels for an uninterrupted panoramic view.
- Dual Chamber Design: Separates the main components (CPU/GPU) from the power supply and drives for improved cooling and cable management.
- Back-Connect Motherboard Support: Compatible with next-gen back-connect motherboards for a cleaner internal look and optimized airflow.
- Pre-Installed ARGB PWM Fans: Comes with 7 x 120mm ARGB PWM fans, including 6 reverse fans for massive air intake.
- Built-In ARGB & PWM Fan Controller: Allows for easy control of lighting effects and fan speeds, either via a dedicated LED button or synchronized with the motherboard.
- Appoġġ estensiv għat-tkessiħ: Supports up to 10 fans simultaneously and accommodates 360mm radiators at the top and bottom, and a 280mm radiator on the side.
- Kompatibilità Għolja: Supports E-ATX, ATX, M-ATX, and ITX motherboards, CPU coolers up to 160mm, and GPUs up to 410mm.
Image: Illustration of the 270-degree full-view tempered glass design with a detailed inset showing the 45-degree glass beveling technique.
Image: Diagram illustrating the dual-chamber design, separating the CPU/GPU area from the PSU/drive area, highlighting the 95mm cable management space.
3. Komponenti u Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni.
- Antec C5 ARGB Mid-Tower PC Case
- 7 x 120mm ARGB PWM Fans (6 reverse, 1 regular)
- Built-in ARGB & PWM Fan Controller Hub
- Kaxxa tal-Aċċessorji (viti, rabtiet tal-kejbil, manwal tal-utent)
Image: Visual representation of the pre-installed 7 ARGB PWM fans and the integrated ARGB & PWM fan controller.
4. Setup u Installazzjoni
Before starting, ensure you have a clean, static-free workspace. Refer to your motherboard and component manuals for specific installation instructions.
4.1 Removing Panels
The tempered glass front and side panels are designed for tool-free removal. Gently pull the panels away from the chassis to detach them. Exercise caution as glass is fragile.
Image: The Antec C5 ARGB case with its front and side tempered glass panels opened, demonstrating the tool-free design.
4.2 Installazzjoni tal-Motherboard
Install your E-ATX, ATX, M-ATX, or ITX motherboard into the main chamber. For back-connect motherboards, ensure all necessary cables are routed through the rear cutouts before securing the motherboard.
Immaġni: Wara view of the Antec C5 ARGB chassis highlighting the cutouts for back-connect motherboards, allowing for cleaner cable routing.
4.3 Installazzjoni tal-Provvista tal-Enerġija u l-Ħażna
The power supply unit (PSU) is mounted in the top compartment of the dual-chamber design. The removable hard drive cage provides space for 1 x 3.5" HDD and 2 x 2.5" SSDs. Additional storage can be mounted by removing specific fans.
Image: Diagrams showing the removable hard drive cage for 3.5" HDD and 2.5" SSDs, and alternative mounting options for storage drives.
4.4 Installazzjoni tas-Sistema tat-Tkessiħ (Fannijiet u Radjaturi)
Il-kaxxa tappoġġja diversi konfigurazzjonijiet ta' fann u radjatur:
- Appoġġ tal-fann:
- Fuq: 3 x 120mm jew 2 x 140mm
- Wara: 1 x 120mm
- Side: 3 x 120mm or 2 x 140mm
- Qiegħ: 3 x 120mm
- Appoġġ għar-radjatur:
- Fuq: Sa 360mm
- Ġenb: Sa 280mm
- Bottom: Up to 360mm
Ensure proper clearance for radiators and fans. Total thickness of radiator and fans on the side should be less than 75mm. For push-pull radiators on top, memory height should be less than 35mm.
Image: Diagrams detailing the fan and radiator support locations and sizes within the Antec C5 ARGB case.
Image: Illustrations showing the maximum clearance for side-mounted radiators (75mm total thickness) and top-mounted push-pull radiators (35mm memory height).
4.5 Installazzjoni tal-Karta tal-Grafika
The case supports graphics cards up to 410mm in length. Ensure adequate space and proper power connections.
Immaġni: Interna view of the case indicating support for graphics cards up to 410mm in length, compatible with RTX 40 series.
5. Istruzzjonijiet Operattivi
5.1 Funzjonijiet tal-Panel tal-I/O
Il-pannell tal-I/O ta' fuq jipprovdi aċċess konvenjenti għall-portijiet u l-kontrolli essenzjali:
- Buttuna tal-Qawwa: Biex tixgħel/titfi s-sistema.
- LED Control Button: Cycles through ARGB lighting modes or synchronizes with motherboard software.
- Portijiet USB 3.0 (x2): Għat-trasferiment tad-dejta b'veloċità għolja.
- HD-Audio (Headphone/Microphone): Għad-dħul u l-ħruġ tal-awdjo.
- Type-C 3.2 Gen 2 Port: For ultra-fast data transmission with compatible devices.
Immaġni: Close-up view of the top I/O panel, labeling the Power button, LED Control button, USB 3.0 ports, HD-Audio jacks, and the Type-C 3.2 Gen 2 port.
5.2 Kontroll tad-Dawl ARGB
The pre-installed ARGB fans and lighting strip can be controlled via the dedicated LED button on the I/O panel. Press the button to cycle through various lighting effects. For advanced customization and synchronization with other components, connect the ARGB controller to your motherboard's ARGB header and use the motherboard's lighting software.
6. Manutenzjoni
6.1 Tindif tal-Filtru tat-Trab
The Antec C5 ARGB case is equipped with magnetic dust filters on the top and bottom for easy removal and cleaning. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case.
- Gently pull the magnetic dust filters to remove them.
- Naddaf il-filtri bl-użu ta' arja kkompressata jew billi tlaħlaħhom bl-ilma. Kun żgur li jkunu niexfa għalkollox qabel ma terġa' twaħħalhom.
- Align the filters with their respective openings and allow the magnets to secure them in place.
Immaġni: View of the top and bottom magnetic dust filters, showing their easy removal for cleaning.
6.2 Tindif Ġenerali
Uża artab, damp cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid abrasive cleaners or solvents.
7. Speċifikazzjonijiet
| Kategorija | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | C5 ARGB |
| Tip ta' Każ | Torri tan-Nofs |
| Dimensjonijiet (LxWxH) | 15.74 x 18.46 x 11.22 pulzieri |
| Piż | 16.72 liri |
| Materjal | Ħġieġ ittemprat |
| Kompatibbiltà tal-motherboard | E-ATX, ATX, M-ATX, ITX |
| CPU Cooler Max Għoli | 160 mm |
| Tul Massimu tal-GPU | 410 mm |
| PSU Max Length (incl. cables) | 240 mm |
| Fannijiet installati minn qabel | 7 x 120mm ARGB PWM Fans |
| Portijiet I/O | 2 x USB 3.0, 1 x Type-C 3.2 Gen 2, HD-Audio, Power, LED Control |
| Metodu tat-tkessiħ | Arja, Ilma |
| Kulur Dawl | Multiple colors (ARGB) |
Image: Diagram illustrating the extensive interior, showing maximum dimensions for CPU cooler height, GPU length, and power supply length.
8 Issolvi l-problemi
Din it-taqsima tipprovdi soluzzjonijiet għal kwistjonijiet komuni li tista’ tiltaqa’ magħhom.
8.1 Fans Not Spinning / ARGB Not Lighting Up
- Iċċekkja l-Konnessjonijiet: Ensure all fans are properly connected to the built-in fan controller. Verify the controller is connected to a SATA power cable from your PSU and to a fan header/ARGB header on your motherboard (if using motherboard control).
- Buttuna LED: Press the LED control button on the I/O panel to cycle through lighting modes.
- Softwer tal-Motherboard: If connected to the motherboard, ensure your motherboard's ARGB software is installed and configured correctly.
8.2 Poor Airflow / High Temperatures
- Clean Dust Filters: Naddaf regolarment il-filtri manjetiċi tat-trab fuq in-naħa ta’ fuq u ta’ isfel tal-kaxxa.
- Orjentazzjoni tal-Fann: Verify that the fans are oriented correctly for optimal airflow (intake and exhaust). The pre-installed fans are set up for efficient bottom-to-top vertical airflow.
- Ġestjoni tal-Kejbil: Ensure cables are neatly managed in the dual chamber to avoid obstructing airflow.
8.3 Front I/O Ports Not Functioning
- Check Motherboard Connections: Ensure the front panel connectors (USB 3.0, Type-C, HD-Audio, Power, Reset/LED) are securely connected to the correct headers on your motherboard.
- Installazzjoni tas-sewwieq: For USB 3.0 and Type-C ports, ensure the necessary motherboard drivers are installed.
9. Garanzija u Appoġġ
Antec products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Antec website. For technical support, product inquiries, or replacement parts, please contact Antec customer service through their official channels.
Antec Uffiċjali Websit: www.antec.com.
