FLEXISPOT E6 MAX Mutur Doppju 3 StagManwal tal-Utent tal-Iskrivanija bil-Wieqfa es

Introduzzjoni

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 MAX Dual Motor 3 Stages Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Informazzjoni dwar is-Sigurtà

TWISSIJA:

Exceeding the maximum weight recommendation of 352 pounds may cause damage or pose a safety risk. Ensure the desk is not overloaded. Keep children and pets away from the desk during height adjustments to prevent injury due to the anti-collision function.

Kontenut tal-Pakkett

Qabel tibda l-assemblaġġ, ivverifika li l-partijiet kollha huma preżenti u mhux imħassra. Il-pakkett tipikament jinkludi:

• Whole-piece Desktop (55"x28" Special Walnut)
• Desk Frame (Black) with Dual Motors
• 3-Stage Lifting Columns (2)
• Feet/Bases (2)
• Control Panel with LCD screen and backlit buttons
• Adapter tal-Enerġija u Kejbils
• Ħardwer tal-Assemblaġġ (viti, Allen wrench)
• Complimentary Accessories: Velcro Straps, Set of Wheels, Cable Manager

Image: All components of the FlexiSpot E6 MAX standing desk laid out for assembly, including the desktop, frame parts, and accessories.

Setup Istruzzjonijiet

Assembly is straightforward and can typically be completed by one person in approximately 30 minutes. A power drill is recommended for some steps, though a hand screwdriver can also be used.

1. Ħoll il-Komponenti: Carefully remove all parts from the two shipping boxes. One box contains the desktop, and the other contains the frame and accessories.
2. Assemble Support Beams: Connect the three pieces of each support beam by sliding the outer sections together and tightening them securely.
3. Attach Lifting Columns: Securely attach the lifting columns to the assembled support beams using the provided Allen wrench and screws. Each side requires four screws.
4. Install Feet/Bases: Screw the feet onto the bottom of the lifting columns using the Allen wrench. Optionally, swap the feet for the included wheels for easier mobility.
5. Pożizzjoni tad-Desktop: Place the desktop upside down on a clean, soft surface. Carefully align the assembled desk frame onto the pre-drilled holes on the underside of the desktop.
6. Install Control Box and Keypad: Mount the control box and keypad to the designated areas on the underside of the desktop using screws.
7. Qabbad il-Wiring: Connect all necessary wires from the motors, control panel, and power adapter to the control box. Ensure all connections are secure.
8. Ġestjoni tal-Kejbil: Use the included Velcro straps and cable manager to organize and secure all cables neatly under the desk.

Image: The three-stage leg mechanism allows for continuous height adjustment, accommodating various user heights.

Image: Included accessories like Velcro straps, wheels, and a cable manager assist in organizing your workspace.

Istruzzjonijiet Operattivi

Your FLEXISPOT E6 MAX desk features intuitive controls for seamless height adjustment.

Aġġustament Għoli

• The desk adjusts from a minimum height of 24.4 inches to a maximum height of 50 inches.
• Uża l- 'Il fuq (▲) u 'L isfel (▼) arrow buttons on the control panel to manually adjust the desk height.

Programmable Memory Settings

The control panel features four programmable memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.

1. Aġġusta l-iskrivanija għall-għoli mixtieq tiegħek billi tuża l-buttuni 'l fuq/'l isfel.
2. Agħfas il- M buttuna. Id-displej se juri 'S-'.
3. Immediately press one of the numbered memory buttons (1, 2, 3, or 4) to save the current height. The display will confirm the setting.
4. To recall a saved height, simply press the corresponding numbered memory button. The desk will automatically move to that position.

Funzjoni Kontra l-Ħbit

The desk is equipped with a sensitivity mode that detects obstacles during height adjustment. If the desk encounters an object, it will automatically stop and reverse slightly to prevent damage or injury.

Image: The intuitive control panel features an LCD screen, up/down arrows, and four memory settings for quick adjustments.

Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-iskrivanija wieqfa tiegħek.

• Tindif: Imsaħ id-desktop u l-qafas b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif li joborxu jew kimiċi ħarxa li jistgħu jagħmlu ħsara lill-finitura.
• Ġestjoni tal-Kejbil: Periodically check and re-secure cables using the provided Velcro straps or cable manager to prevent tangles and damage.
• Kontroll tal-Mutur: Listen for any unusual noises during operation. If you notice any issues, refer to the troubleshooting section or contact customer support.
• Distribuzzjoni tal-piż: Ensure weight is evenly distributed on the desktop to prevent strain on the motors and frame.

Issolvi l-problemi

If you encounter issues with your FLEXISPOT E6 MAX desk, try the following common troubleshooting steps:

• L-Iskrivanija Mhux Tiċċaqlaq: Iċċekkja l-konnessjonijiet kollha tal-enerġija. Kun żgur li l-kejbil tal-enerġija huwa pplaggjat sew kemm fl-iskrivanija kif ukoll fis-sokit tal-ħajt.
• Kodiċi ta' Żball fuq Display: Refer to the specific error code in the full product manual (not provided here) or contact customer support for guidance.
• Moviment Irregolari: Ensure the desk is on a level surface. Check for any obstructions under the desk that might impede movement.
• Irrisettja Funzjoni: If the desk is unresponsive, unplug it from the power outlet for 10-15 seconds, then plug it back in. This may reset the system.

Speċifikazzjonijiet

Image: The desk's robust construction supports up to 330 lbs, providing a sturdy workstation.

Image: Detailed dimensions of the desktop (55"x28") and the adjustable height ranges for the desk frame.

Garanzija

FLEXISPOT joffri garanzija komprensiva għas-serħan tal-moħħ tiegħek:

• Kopertura ta' 10 Snin: Applies to the desk frame and motors.
• Protezzjoni ta' sentejn: Japplika għall-pannell tal-kontroll u l-elettronika.

For any warranty claims or assistance, please contact FLEXISPOT customer support.

Appoġġ għall-Klijent

For further assistance, technical support, or inquiries regarding your FLEXISPOT E6 MAX Standing Desk, please contact the manufacturer directly. Refer to the contact information provided with your product packaging or visit the official FLEXISPOT websit.

Tista 'wkoll iżżur il- Ħanut FLEXISPOT fuq Amazon għal aktar informazzjoni u riżorsi ta’ appoġġ.