Eskimo Wide 1™ Thermal Ice Fishing Shelter and Travel Cover User Manual

Introduzzjoni

Thank you for choosing the Eskimo Wide 1™ Thermal Ice Fishing Shelter and the accompanying 50" Tub Travel Cover. This product is designed to provide a comfortable and efficient ice fishing experience. The Wide 1™ Thermal shelter features an exclusive expandable design, offering up to 32% more fishable area, and is fully insulated with Eskimo IQ (Insulated Quilted) fabric to retain heat and reduce condensation. The included travel cover is made from durable 300 denier fabric, ensuring secure transport of your sled shelter.

Figure 1: Eskimo Wide 1™ Thermal Ice Fishing Shelter and 50" Tub Travel Cover.

Informazzjoni dwar is-Sigurtà

Always prioritize safety when using your ice fishing shelter. Failure to follow these guidelines may result in injury or damage to the product.

• Ventilazzjoni: When using a heater inside the shelter, ensure adequate ventilation to prevent carbon monoxide buildup. Always open a window or vent.
• Periklu tan-Nar: Keep all flammable materials away from heaters and open flames. Do not use open flame devices directly against the shelter fabric.
• Ice Conditions: Always verify ice thickness and stability before setting up your shelter. Never set up on unsafe ice.
• Riħ: Secure the shelter properly in windy conditions using ice anchors or tie-downs to prevent it from blowing away.
• Oġġetti li jaqtgħu: Be cautious of sharp objects like auger blades or ice picks that could damage the shelter fabric.
• Tfal u Pets: Keep children and pets supervised around the shelter, especially during setup and takedown.

Kontenut tal-Pakkett

Verify that all components are present before beginning assembly or use:

• Eskimo Wide 1™ Thermal Sled Shelter
• 50" Tub Travel Cover
• Assembly Hardware (pre-attached or in a separate bag)
• Manwal għall-Utent (dan id-dokument)

Setup Istruzzjonijiet

1. Spakkjar u Spezzjoni Inizjali

Carefully remove all components from the packaging. Inspect the shelter fabric, frame, and travel cover for any signs of damage that may have occurred during shipping. If any damage is found, do not proceed with setup and contact customer support.

Figure 2: The Eskimo Wide 1™ Thermal Shelter in its compact, unpacked state.

2. Assembling the Shelter Frame

The Eskimo Wide 1™ Thermal shelter features a quick-set frame. Follow these steps to extend and lock the frame into position:

1. Place the sled base on a flat, stable surface.
2. Locate the main support poles. Gently pull them upwards and outwards until they click into their locked positions.
3. Ensure all frame joints are fully extended and securely locked. The fabric will become taut as the frame is extended.

Figure 3: A user inspecting the shelter during the setup process, ensuring all components are correctly aligned.

Istruzzjonijiet Operattivi

1. Deploying the Shelter on Ice

Once the frame is assembled, the shelter is ready for deployment on the ice:

1. Drag the sled to your desired fishing location on the ice.
2. Open the front zipper door and enter the shelter.
3. From inside, you can adjust the expandable wide-bottom design by pushing out the side walls to maximize fishable area.
4. Secure the shelter to the ice using ice anchors (not included) through the designated anchor points to prevent movement, especially in windy conditions.

Figure 4: A user deploying the Eskimo Wide 1™ Thermal Shelter on the ice, showing the interior space.

2. Using the 50" Tub Travel Cover

The travel cover protects your sled and its contents during transport and storage.

1. Ensure the shelter is collapsed and stored securely within the sled tub.
2. Place the travel cover over the sled tub, aligning the reinforced corners with the tub's edges.
3. Pull the elastic band around the rim of the tub to ensure a snug and secure fit.
4. Verify that the cover is fully seated and will not dislodge during transport.

Figure 5: The 50" Tub Travel Cover securely fitted over the sled, ready for transport.

Figura 6: Dettaljat view of the durable 300 denier fabric of the travel cover, showing its fit on the sled in a snowy environment.

Manutenzjoni u Kura

Cleaning the Shelter and Cover

• After each use, remove any snow, ice, or debris from the shelter fabric and sled.
• If cleaning is necessary, use a mild soap and water solution with a soft brush or cloth. Do not use harsh chemicals or abrasive cleaners.
• Laħlaħ sewwa b'ilma nadif.

Ħażna

• Ensure the shelter and travel cover are completely dry before folding and storing to prevent mold and mildew.
• Store the shelter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Avoid storing heavy objects on top of the folded shelter or sled to prevent damage to the frame or fabric.

Issolvi l-problemi

This section addresses common issues you might encounter with your Eskimo Wide 1™ Thermal Shelter.

Speċifikazzjonijiet tal-Prodott

Garanzija u Appoġġ

Eskimo products are built with quality and durability in mind. For specific warranty information regarding your Eskimo Wide 1™ Thermal Shelter and Travel Cover, please refer to the warranty card included with your purchase or visit the official Eskimo websit.

For technical support, replacement parts, or any questions not covered in this manual, please contact Eskimo customer service. You can find contact information and additional resources on the official Eskimo websit: www.geteskimo.com.

Meta tikkuntattja l-appoġġ, jekk jogħġbok żomm in-numru tal-mudell tal-prodott tiegħek (41350) u d-data tax-xiri disponibbli.