Manwal tal-Utent tal-Qafas tas-Sodda Murphy ta' Daqs Sħiħ Flieks b'Xkafef u Dwal LED

1. Introduzzjoni

This manual provides detailed instructions for the assembly, operation, and maintenance of your Flieks Full Size Murphy Bed Frame. This space-saving furniture solution integrates a full-size bed with shelving and LED lighting, designed for efficient use of living space.

Jekk jogħġbok aqra l-istruzzjonijiet kollha bir-reqqa qabel tibda l-assemblaġġ u żomm dan il-manwal għal referenza futura.

2. Informazzjoni dwar is-Sigurtà

• Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-assemblaġġ. Tkomplix bl-assemblaġġ jekk xi partijiet huma neqsin jew imkissra.
• L-assemblaġġ jeħtieġ mill-inqas żewġ adulti.
• Always follow the assembly steps in the order provided.
• Securely fasten all screws and bolts. Periodically check and tighten all connections.
• The bed frame must be securely anchored to a wall to prevent tipping. Use appropriate wall anchors for your wall type.
• Do not exceed the maximum bed weight capacity of 600 lbs.
• Use a mattress with a maximum thickness of 8 inches. Thicker mattresses may prevent proper folding or cause damage.
• Żomm idejk u subgħajk 'il bogħod mill-partijiet li jiċċaqalqu waqt l-operazzjonijiet ta' tiwi u tiftaħ.
• Dan il-prodott huwa rakkomandat għal individwi li għandhom 12-il sena jew aktar.

3. Kontenut tal-Pakkett

Your Flieks Full Size Murphy Bed Frame is shipped in 3 packages. Please verify that all parts listed in the assembly guide (not included in this manual) are present before starting assembly.

Komponenti Inklużi:

• Murphy Bed Frame components (Plywood+MDF)
• Mekkaniżmu li jintlewa tal-metall b'żewġ pistun
• Integrated shelving units (2 five-layer cabinets)
• Sistema tad-dawl LED
• Assembly hardware and tools

4. Setup u Assemblea

Assembly of the Flieks Murphy Bed Frame requires careful attention to detail. Refer to the separate assembly instructions provided with your product for step-by-step guidance. The following points highlight key aspects of the setup process:

• Immuntar tal-ħajt: The bed frame must be securely mounted to a sturdy wall. Ensure the wall structure can support the weight of the bed and mattress.
• Piston Mechanism: The dual piston metal folding mechanism is crucial for the smooth operation of the bed. Install it according to the instructions to ensure proper balance and ease of use.
• Shelving Units: The two five-layer shelving units are integrated into the design. Assemble them firmly to provide stable storage.
• Dwal LED: Connect the LED lighting system as directed. Ensure all wiring is safely routed and secured.

Figure 1: Product Dimensions. This diagram illustrates the overall dimensions of the Murphy bed fully extended and retracted, including measurements for the bed platform and shelving units.

For detailed assembly steps, please consult the dedicated assembly manual included in your packaging.

5. Istruzzjonijiet Operattivi

The Flieks Murphy Bed Frame is designed for easy conversion between a bed and a cabinet configuration.

5.1 Unfolding the Bed

1. Ensure the area in front of the cabinet is clear of obstructions.
2. Grasp the handles located on the front panel of the cabinet.
3. Gently pull the bed frame downwards. The dual piston mechanism will assist in lowering the bed smoothly.
4. As the bed lowers, flip the support leg down onto the floor to provide stability. Ensure the leg is fully extended and locked into position.
5. The bed is now ready for use.

Figure 2: Bed in Unfolded Position. This image displays the Murphy bed fully extended, revealing the sleeping surface, the two five-layer shelving units on either side, and the overhead LED lighting.

5.2 Folding the Bed

1. Remove all bedding and pillows from the bed surface. Ensure the mattress is within the 8-inch thickness limit.
2. Lift the support leg and fold it back into its stored position.
3. Grasp the handles on the bed frame and gently lift the bed upwards. The dual piston mechanism will assist in raising the bed.
4. Continue lifting until the bed frame is fully vertical and securely latched into the cabinet position.
5. The bed is now stored, and the cabinet space is available.

Figure 3: Bed in Folded Cabinet Position. This image shows the Murphy bed fully retracted into its cabinet form, with the side shelving units providing functional storage.

5.3 L-użu tad-Dwal LED

The integrated LED lights provide ambient illumination. Locate the power switch, typically positioned discreetly near the top of the cabinet or bed frame. Turn the switch on or off as desired. The lights are designed to offer gentle illumination, suitable for reading or as a night lamp.

Figure 4: LED Lights in Operation. This image captures the Murphy bed unfolded in a low-light setting, highlighting the soft glow emitted by the integrated LED lights, suitable for nighttime use.

5.4 Using the Shelves

The two five-layer shelving units on either side of the bed provide additional storage space. These shelves are fixed and accessible whether the bed is folded or unfolded. Organize books, decorative items, or other personal belongings as needed.

Figure 5: Integrated Shelving Units. This image provides a closer view of the five-layer shelving units flanking the Murphy bed, demonstrating their capacity for storing various items.

6. Manutenzjoni

• Tindif: Imsaħ l-uċuħ b'artab, damp drapp. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu li jistgħu jagħmlu ħsara lill-finitura.
• Iċċekkja tal-Hardware: Periodically inspect all screws, bolts, and connections. Tighten any loose hardware to ensure stability and safety.
• Piston Mechanism: The dual piston mechanism is designed for durability. If you notice any stiffness or unusual sounds during operation, inspect for obstructions. Do not attempt to lubricate or disassemble the mechanism unless specifically instructed by the manufacturer.
• Dwal LED: If the LED lights stop working, check the power connection. If the issue persists, contact customer support. Do not attempt to replace individual LED components.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

• Ditta: Flieks
• Mudell: LP000694AAE-MZJ
• Daqs: Sħiħ
• Kulur: Griż
• Materjal: Plywood + MDF
• Overall Product Dimensions (Bed Unfolded): 90.8"T x 81"W x 83.7"Għ
• Overall Product Dimensions (Cabinet Folded): 97.3"T x 17.7"W x 83.7"Għ
• Bed Weight Capacity: 600 lbs
• Ħxuna Rakkomandata tas-Saqqu: Sa 8 pulzier
• Numru ta' Pakketti: 3
• Assemblaġġ Meħtieġa: Iva
• Oriġini: Vjetnam
• UPC: 196986826731

9. Garanzija u Appoġġ

For warranty information, please refer to the documentation provided at the time of purchase or contact Flieks customer service directly. If you encounter any issues or require assistance with your product, please reach out to our support team.

Appoġġ għall-Klijent: Refer to your purchase receipt or the Flieks official websit għad-dettalji tal-kuntatt.