SPI SC-01003 Replacement Start/Reverse Button Kit User Manual

Prodott Overview

This document provides detailed instructions for the installation and use of the SPI SC-01003 Replacement Start/Reverse Button Kit. This kit is designed as a direct replacement for the original equipment manufacturer (OEM) part number 0609-535, specifically for compatible Arctic Cat snowmobile models. The kit includes the start/reverse button and two springs, ensuring a complete and reliable replacement.

SPI SC-01003 Replacement Start/Reverse Button Kit with two springs

Image: The SPI SC-01003 Replacement Start/Reverse Button Kit, showing the black button with white forward (F) and reverse (R) arrows, along with two small metal springs.

Partijiet Inklużi fil-Kit

QTY	DESKRIZZJONI
2	Rebbiegħa
1	Buttuna tar-Reverse
1	Folja ta' Istruzzjonijiet

Note: While two springs are included, only one is typically required for installation. The second spring is provided as a spare.

Istruzzjonijiet ta' Installazzjoni (Setup)

Please read all instructions carefully before beginning the installation of the Handlebar Control Reverse/Start Button Kit. Professional installation is recommended if you are not familiar with snowmobile electrical systems.

Instruction sheet for Handlebar Control Reverse/Start Button Kit SC-01003 with diagrams

Image: Official instruction sheet showing detailed diagrams for button removal and installation, including spring placement and button alignment.

Ipprepara l-Manubriju: If your snowmobile is equipped with a handlebar cover, carefully remove it to access the control assembly.
Remove Existing Button: Carefully remove the existing reverse button from the handlebar control.
Loosen Handlebar Cap Screws: Loosen all four cap screws that secure the handlebar cap to the riser. This step is necessary to allow for handlebar rotation.
Rotate Handlebar: Rotate the handlebar so that the control assembly is facing upwards. This provides better access for the button installation.
Installa Rebbiegħa Ġdida: Install one of the new springs into the designated cavity of the left-side handlebar control. Refer to "DETAIL A" in the instruction sheet image above for visual guidance on spring placement.
Install Reverse Button: Press the new reverse button into place. Ensure the button aligns correctly with the tab in the left handlebar control. The button should snap securely into place. Refer to the "PRESS HERE TO ASSEMBLE" diagram in the instruction sheet image above for visual guidance.
Adjust and Secure Handlebar: Readjust the handlebar to the operator's desired position. Once positioned, tighten the four cap screws to 15 ft-lb to secure the handlebar.

IMPORTANT NOTE: The kit includes two springs. Only one spring is required for installation of the new button. The second spring is provided as a spare in case one is lost during the installation process or for future use.

It-tħaddim tal-buttuna

The SPI SC-01003 button functions as a combined start and reverse control, depending on your snowmobile's specific wiring and original setup. Typically, pressing the button will engage the designated function (either start or reverse). Refer to your snowmobile's owner's manual for specific operational details related to the start/reverse system.

Lura view of the SPI SC-01003 Replacement Start/Reverse Button

Immaġni: Wara view of the SPI SC-01003 button, showing the clear plastic housing and metal backing plate where the electrical connections would be made.

Kompatibilità

This replacement button kit is compatible with various Arctic Cat snowmobile models. Please verify your model year and specific model against the list below to ensure compatibility:

2019 M6000 Alpha One
2019 M6000 SE ES
2020 M8000 Alpha One
2019 M8000 Hardcore
2020-2023 M8000 Hardcore Alpha One
2020-2023 M8000 Hardcore Alpha One ES
2019 M8000 Mountain Cat
2019-2023 M8000 Mountain Cat Alpha One
2021-2023 M8000 Mountain Cat Alpha One ATAC
2020-2023 M8000 Mountain Cat Alpha One ES
2022-2023 M8000 Mountain Cat Alpha One ES ATAC
2019/2021 M8000 Mountain Cat ES
2019 M8000 Sno Pro
2019 M8000 Sno Pro ES
2019 Norseman 6000 ES
2019 Norseman X 6000
2019/2021-2023 Norseman X 8000
2019 Pantera 6000 ES
2020-2022 Riot 6000
2020-2023 Riot 8000
2022-2023 Riot 8000 ATAC
2020-2023 Riot X 8000
2022-2023 Riot X 8000 ATAC
2023 Riot 9000 ATAC
2019 XF 6000 Cross Country Limited ES
2019 XF 6000 High Country ES
2019 XF 8000 Cross Country Limited ES
2019 XF 8000 High Country
2019 XF 8000 High Country Limited ES
2023 ZR 6000
2019 ZR 6000 ES
2019-2022 ZR 6000 Limited ES
2019-2020 ZR 6000 Limited ES iACT
2021 ZR 6000 Limited ES ATAC
2020-2023 ZR 6000 R XC
2023 ZR 6000 R XC ES
2019/2022 ZR 6000 RR ES
2019-2020 ZR 6000 Sno Pro ES
2023 ZR 8000
2023 ZR 8000 ATAC
2019 ZR 8000 ES
2019-2022 ZR 8000 Limited ES
2019-2020 ZR 8000 Limited ES iACT
2021-2022 ZR 8000 Limited ES ATAC
2019-2022 ZR 8000 RR ES
2019-2020 ZR 8000 Sno Pro ES
2020-2022 ZR 9000 Thundercat
2020 ZR 9000 Thundercat iACT
2021-2022 ZR 9000 Thundercat ATAC
2022 ZR 9000 Thundercat EPS
2022-2023 ZR 9000 Thundercat EPS ATAC

Speċifikazzjonijiet

Attribut	Dettall
Manifattur	SPI
Brand	SPI
Numru tal-Mudell	SC-01003
Numru tal-Parti OEM Sostitwit	0609-535
Materjal	Metal (for internal components/springs)
Piż tal-oġġett	113 g (madwar 0.25 libbra)
Kulur	Iswed
Tip ta 'Servizz tal-Vettura	Snowmobile
Fit Tip	Tajjeb Speċifiku tal-Vettura

Manutenzjoni

The SPI SC-01003 Replacement Start/Reverse Button Kit is designed for durability and minimal maintenance. However, regular inspection can prolong its lifespan:

Spezzjoni Viżwali: Periodically check the button for any signs of physical damage, cracks, or excessive wear.
Indafa: Keep the area around the button clean from dirt, ice, and debris, which can impede its operation. Use a soft cloth to wipe the surface.
Kontroll tal-Funzjonalità: Before each ride, ensure the button depresses smoothly and returns to its original position without sticking.

Issolvi l-problemi

If you experience issues with your SPI SC-01003 Replacement Start/Reverse Button, consider the following common troubleshooting steps:

Buttuna ma Tirrispondix:
- Ensure the button is correctly seated and snapped into place as per installation instructions.
- Check for any obstructions (dirt, ice) preventing the button from fully depressing.
- Verify electrical connections to the button are secure and free from corrosion.
- Inspect the spring for proper tension and placement.
It-twaħħil tal-buttuna:
- Naddaf madwar il-buttuna biex tneħħi kwalunkwe debris.
- Ensure the button is not misaligned within its housing.
Funzjoni Intermittenti:
- Iċċekkja għal konnessjonijiet tal-wajers maħlula jew imsaddadin.
- Ensure the button is fully depressing and making proper contact internally.

If issues persist after performing these checks, it is recommended to consult a qualified snowmobile technician or contact SPI customer support.

Garanzija u Appoġġ

Specific warranty details for the SPI SC-01003 Replacement Start/Reverse Button Kit are not provided within this document. For information regarding product warranty, technical support, or replacement parts, please contact the manufacturer, SPI, directly through their official webkanali tas-sit jew tas-servizz tal-konsumatur.

Always refer to the official SPI website or product packaging for the most current warranty and support information.

	Manwal tal-Utent tal-Inverter tal-Qawwa tal-Mewġa Sinusoidali Pura tas-Serje SPI Manwal tal-utent għall-Inverter tal-Enerġija tal-Mewġa Sinusoidali Pura tas-Serje SPI, li jiddeskrivi l-karatteristiċi tal-prodott, l-ispeċifikazzjonijiet, it-tħaddim, il-manutenzjoni, u s-soluzzjoni tal-problemi.
	Manwal tal-Utent tal-Inverter Kollox f'Wieħed SPI-8K-H3P, SPI-10K-H3P, SPI-12K-H3P Manwal tal-utent għas-serje All-in-one Inverter, inklużi l-mudelli SPI-8K-H3P, SPI-10K-H3P, u SPI-12K-H3P. Dan il-manwal jipprovdi linji gwida komprensivi dwar is-sigurtà, l-istruzzjonijiet tal-produzzjoni, l-installazzjoni, il-konnessjoni, it-tħaddim, il-komunikazzjoni, ir-rimedju tal-ħsarat, il-protezzjoni, u l-manutenzjoni.
	Manwal tal-Utent tas-Sett tal-Kontrollur SPI LED Skydance SC+R9 RF 2.4G RGB/RGBW Manwal tal-utent għas-Skydance SC+R9 RF 2.4G RGB/RGBW LED SPI Controller Set, li jiddeskrivi l-karatteristiċi, l-ispeċifikazzjonijiet tekniċi, id-dijagrammi tal-wajers, il-funzjonijiet remoti, u l-kompatibilità ma' diversi SPI LED ICs.
	Manwal tas-Servizz tas-Sistema tal-Istartjar u l-Iċċarġjar tan-Nissan Altima Manwal dettaljat tas-servizz għan-Nissan Altima tal-2005 li jkopri s-sistema tal-istartjar u tal-iċċarġjar, inklużi prekawzjonijiet, tħejjija, manutenzjoni tal-batterija, dijanjostika tas-sistema tal-istartjar, dijanjostika tas-sistema tal-iċċarġjar, u dejta tas-servizz għall-magni QR25DE u VQ35DE.
	Manwal tas-Servizz tas-Sistema tal-Istartjar u l-Iċċarġjar tal-INFINITI I35 Manwal komprensiv tas-servizz għall-INFINITI I35, li jagħti dettalji dwar is-sistemi tal-istartjar u tal-iċċarġjar. Ikopri l-immaniġġjar tal-batterija, id-dijanjostika tas-sistema tal-istartjar, is-soluzzjoni tal-problemi tas-sistema tal-iċċarġjar, il-kostruzzjoni tal-komponenti, il-proċeduri tat-tneħħija/installazzjoni, u l-ispeċifikazzjonijiet tad-dejta tas-servizz.
	Manwal tas-Servizz tas-Sistema tal-Istartjar u l-Iċċarġjar Nissan/Infiniti (VK45DE, VQ35DE) Manwal komprensiv tas-servizz li jagħti dettalji dwar is-sistemi tal-istartjar u tal-iċċarġjar għal vetturi Nissan/Infiniti b'magni VK45DE u VQ35DE. Jinkludi dijanjostika, issolvi l-problemi, tneħħija, installazzjoni, u speċifikazzjonijiet għall-batterija, l-istarter, u l-alternator.

SPI SC-01003

User Manual: SPI SC-01003 Replacement Start/Reverse Button Kit