1. Introduzzjoni u Fuqview
The Quantum Audio X Series QWX400012D4 is a high-performance 12-inch Dual Voice Coil (DVC) subwoofer designed to deliver powerful and accurate deep bass. Engineered with a focus on maximum excursion and durability, this subwoofer features a double-stitched high excursion foam surround, a die-cast aluminum vented basket, and a 2.5-inch high-temperature voice coil. Its robust construction and advanced design contribute to superior sound quality and long-term reliability.
Figure 1.1: Quantum Audio X Series QWX400012D4 Subwoofer (Angled View)
2. Informazzjoni dwar is-Sigurtà
Please read all safety instructions carefully before installing and operating your subwoofer. Failure to follow these guidelines may result in injury or damage to the product or vehicle.
- Immaniġġjar tal-Enerġija: This subwoofer is rated for up to 4000 watts maximum power. Ensure your amplifier is appropriately matched and does not exceed this rating to prevent damage.
- Wiring kif suppost: Always use appropriate gauge wiring for power, ground, and speaker connections. Incorrect wiring can lead to overheating and fire hazards.
- Ventilazzjoni: Kun żgur li jkun hemm ventilazzjoni adegwata madwar is-subwoofer u amplifier to prevent overheating, especially during extended use.
- Immuntar Sikur: Mount the subwoofer securely in a suitable enclosure or location to prevent it from becoming a projectile during sudden stops or accidents.
- Protezzjoni tas-Smigħ: Espożizzjoni fit-tul għal livelli għoljin ta’ pressjoni tal-ħoss tista’ tikkawża ħsara permanenti fis-smigħ. Oqgħod attent meta taġġusta l-livelli tal-volum.
- Installazzjoni professjonali: Jekk m'intix ċert dwar xi aspett tal-installazzjoni, ikkonsulta professjonist kwalifikat tal-awdjo tal-karozzi.
3. Kontenut tal-Pakkett
Carefully unpack your Quantum Audio QWX400012D4 subwoofer and check for any signs of damage. The package should contain the following items:
- Quantum Audio X Series QWX400012D4 12-inch Subwoofer (1 unit)
If any items are missing or damaged, please contact your dealer or Quantum Audio customer support immediately.
4. Karatteristiċi
The Quantum Audio QWX400012D4 subwoofer incorporates several key features designed for optimal performance and durability:
- Ground-Shaking Bass Design: Engineered to produce deep, impactful bass frequencies.
- Max Excursion and Durability: Features a double-stitched high excursion foam surround and a die-cast aluminum vented basket for maximum cone movement and structural integrity.
- Power Handling Up to 4000 Watts (Maximum): Capable of handling significant power for high-output audio systems.
- Rugged Stylish Look: Protective magnet cover and overall design provide a robust and aesthetically pleasindehra g.
- Daqs ta' 12-il pulzier: Standard size for versatile installation in various vehicle types and enclosures.
- 2.5-inch High-Temperature Voice Coil: Designed to withstand high power levels and prolonged use without thermal breakdown.
- Compressed Paper Cone: Known for its ability to produce clear and accurate bass tones.
- Proprietary Full Round PVC Gasket: Ensures a secure seal when mounted.
- Heavy-Gauge Spring Terminals: Provide reliable and secure electrical connections.
Figura 4.1: Fuq View of Subwoofer Cone and Surround
Figure 4.2: Subwoofer Magnet and Model Label
5. Setup
Proper setup is crucial for optimal performance and longevity of your subwoofer. Follow these general guidelines:
5.1 Għażla tal-Għeluq
The QWX400012D4 is designed to perform well in both sealed and ported enclosures. Consult a car audio specialist or use a reputable enclosure design software to determine the ideal enclosure volume and port tuning frequency for your specific application and desired sound characteristics.
5.2 Immuntar
Mount the subwoofer securely within the chosen enclosure. Ensure that the mounting holes align perfectly and use appropriate screws to fasten the subwoofer to the enclosure baffle. Avoid overtightening, which can strip screws or damage the subwoofer frame.
5.3 Konnessjonijiet tal-Wiring
The QWX400012D4 is a Dual Voice Coil (DVC) 4-ohm subwoofer. This allows for various wiring configurations to achieve different impedance loads at the amplifier. Konfigurazzjonijiet komuni jinkludu:
- Parallel Wiring (2 ohms): Connect the positive terminals of both voice coils together, and the negative terminals of both voice coils together. Then connect these combined terminals to the amplifier. This configuration presents a 2-ohm load.
- Series Wiring (8 ohms): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Then connect the remaining positive and negative terminals to the amplifier. This configuration presents an 8-ohm load.
Always ensure correct polarity (+ to + and - to -) to prevent phase issues. Use heavy-gauge speaker wire (e.g., 12-gauge or 10-gauge) for optimal power transfer.
Figure 5.1: Subwoofer Terminals for Wiring
5.4 AmpTqabbil tal-Lifier
Agħżel an amplifier that can provide sufficient power to the subwoofer without clipping. While the subwoofer can handle up to 4000 watts maximum, it is recommended to use an amplifier that provides RMS power within the subwoofer's continuous power handling capabilities (not explicitly stated in provided data, but typically lower than max). Ensure the amplifier's impedance output matches the subwoofer's wired impedance load.
6. Joperaw
Once installed, follow these guidelines for operating your Quantum Audio subwoofer:
6.1 Perjodu ta' Break-In
Allow a break-in period of approximately 20-30 hours of normal listening before pushing the subwoofer to its limits. This allows the suspension components (surround and spider) to loosen up and reach their optimal compliance, improving performance and longevity.
6.2 Amplifier Gain and Crossover Settings
Properly set your amplifier's gain (input sensitivity) to match the output voltage of your head unit. Avoid setting the gain too high, as this can lead to clipping and damage the subwoofer. Utilize the low-pass filter (LPF) on your amplifier or head unit to send only bass frequencies to the subwoofer, typically set between 60Hz and 100Hz, depending on your system and preferences.
6.3 Listening Levels
While the QWX400012D4 is designed for high output, avoid prolonged listening at extremely high volumes that cause audible distortion or excessive excursion. If you hear distortion, reduce the volume immediately.
7. Speċifikazzjonijiet
Detailed technical specifications for the Quantum Audio X Series QWX400012D4 Subwoofer:
| Speċifikazzjoni | Valur |
|---|---|
| Isem tal-Mudell | Subwoofer |
| Numru tal-Mudell tal-Oġġett | QWX400012D4 |
| Tip ta' Kelliem | Subwoofer |
| Dijametru tas-Subwoofer | 12 Pulzier |
| Qawwa tal-Ħruġ Massimu tal-Ispeaker | 4000 Watt (Massimu) |
| Konfigurazzjoni tal-Kolja tal-Vuċi | Kojl tal-Vuċi Doppju (DVC) |
| Voice Coil Impedance | 4 Ohm per coil |
| Teknoloġija tal-Konnettività | Bil-fili |
| Piż tal-oġġett | 18.96 liri |
| Dimensjonijiet tal-Prodott | 6.1 x 11.14 x 12.48 pulzieri |
| Manifattur | Awdjo Quantum |
| Tip ta 'Immuntar | Immonta bil-flus |
8. Manutenzjoni
To ensure the longevity and continued performance of your subwoofer, follow these simple maintenance tips:
- Tindif: Uża drapp artab u niexef biex timsaħ il-kon u l-madwar tas-subwoofer. Evita li tuża kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Spezzjoni: Periodically inspect the speaker terminals and wiring for any signs of corrosion or loose connections.
- Protezzjoni Ambjentali: Ipproteġi s-subwoofer minn temperaturi estremi, dawl tax-xemx dirett, u umdità.
- Evita t-Titqib: Be careful not to puncture or tear the cone or surround, as this will significantly degrade performance.
9 Issolvi l-problemi
If you experience issues with your Quantum Audio subwoofer, refer to the following common problems and solutions:
- Ebda Ħsejjes:
- Check all wiring connections (power, ground, remote, speaker) at both the amplifier u s-subwoofer.
- Ivverifika l- ampIl-lifer huwa mixgħul (iċċekkja d-dawl indikatur tal-enerġija).
- Check fuses on the amplifier and power wire.
- Ensure the head unit is sending an audio signal to the ampaktar ħaj.
- Ħoss Mgħawġ:
- Naqqas il- amplifier gain setting.
- Check for proper low-pass filter (LPF) settings on the amplifier jew head unit.
- Ensure the subwoofer is not over-driven (reduce volume).
- Check for loose mounting or enclosure rattles.
- Ħruġ ta' Bass Dgħajjef:
- Verify correct wiring impedance match between subwoofer and ampaktar ħaj.
- Iċċekkja ampsettings tal-gwadann tal-lifier.
- Ensure proper phase (polarity) of the subwoofer wiring.
- Confirm the enclosure volume and tuning are appropriate for the subwoofer.
- Subwoofer Overheating:
- Kun żgur li jkun hemm ventilazzjoni adegwata madwar is-subwoofer u ampaktar ħaj.
- Iċċekkja għal amplifier clipping (distortion).
- Ivverifika l- amplifier's power output is not excessive for the subwoofer's rating.
If the problem persists after attempting these solutions, contact Quantum Audio customer support or a qualified car audio technician.
10. Garanzija u Appoġġ
The Quantum Audio X Series QWX400012D4 Subwoofer comes with a Garanzija Limitata. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Quantum Audio websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Appoġġ għall-Klijent
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Quantum Audio customer support through their official websit jew l-informazzjoni ta’ kuntatt ipprovduta max-xiri tiegħek.
