CREWORKS 2L Digital Ultrasonic Cleaner User Manual

1. Introduzzjoni

Thank you for choosing the CREWORKS 2L Digital Ultrasonic Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.

2. Istruzzjonijiet tas-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-unità:

• Żarmax l-unità.
• Tużax waħdu.
• Always use sufficient fluid in the tank.
• Unplug before filling or draining.
• Do not operate the unit without liquid in the tank.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Tgħaddix l-unità prinċipali fl-ilma jew likwidi oħra.
• Use only appropriate cleaning solutions. Avoid flammable or corrosive liquids.
• Kun żgur li l-korda tal-enerġija mhix bil-ħsara u li hija konnessa sew ma' sokit ertjat.

Figure 2.1: The CREWORKS 2L Digital Ultrasonic Cleaner with its warning label, emphasizing safety precautions.

3. Prodott Aktarview u Karatteristiċi

The CREWORKS 2L Digital Ultrasonic Cleaner is designed for efficient and thorough cleaning of various items using ultrasonic technology. It features a durable stainless steel tank, digital controls, and multiple cleaning modes.

3.1 Karatteristiċi ewlenin

• Kapaċità 2L: Suitable for a wide range of items.
• 60W Ultrasonic Power: Provides effective cavitation for deep cleaning.
• 100W Heating Function: Allows for temperature adjustment (20-80℃) to enhance cleaning.
• Kontrolli Diġitali: Intuitive panel for setting time (0-99 min) and temperature.
• Degassing Mode: Eliminates gas bubbles for improved cavitation efficiency.
• 7 Levels of Oscillation: Adjustable intensity for delicate to robust cleaning.
• Operazzjoni kwieta: Thick tank design reduces noise to below 60 dB.
• 3 Modi ta' Tindif: Quick, Standard, and Deep for varied cleaning needs.
• 304 Stainless Steel Tank: Ensures durability and food-grade safety.
• Transparent Acrylic Lid: Allows real-time observation of the cleaning process.

Figure 3.1: Close-up of the digital control panel, highlighting the time and temperature displays, and control buttons.

Figure 3.2: Illustration of the ultrasonic cleaning principle, showing the formation, expansion, and bursting of microscopic bubbles for effective cleaning.

4. Setup

Follow these steps to set up your ultrasonic cleaner:

1. Spakkjar: Carefully remove the unit from its packaging. Inspect for any damage.
2. Pjazzament: Place the cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation.
3. Konnessjoni tal-Enerġija: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before plugging in.
4. Mili tat-Tank: Open the lid and fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill or underfill.
5. Daħħal il-Basket: If using, place the cleaning basket into the tank.

Figure 4.1: The ultrasonic cleaner with its lid open, showing the stainless steel tank and the included cleaning basket.

5. Istruzzjonijiet Operattivi

Operating your CREWORKS ultrasonic cleaner is straightforward:

5.1 Operazzjoni Bażika

1. Qawwa Mixgħul: Turn on the main power switch located at the back or side of the unit. The digital display will illuminate.
2. Poġġi l-Oġġetti: Carefully place the items to be cleaned into the cleaning basket, ensuring they are fully submerged in the solution but not touching each other or the tank bottom directly.
3. Temperatura Issettjata (Mhux obbligatorja): Press the "T/°C" button to adjust the desired cleaning temperature (20-80℃) using the up/down arrows. Heating will begin automatically.
4. Issettja Ħin: Use the "TIME" up/down arrows to set the cleaning duration (0-99 minutes).
5. Agħżel il-Modalità (Mhux obbligatorju): Choose from "QUICK" (5 min), "STD" (15 min), or "EXT" (30 min) preset modes if desired.
6. Ibda t-Tindif: Press the "START" button to begin the ultrasonic cleaning cycle. The display will show the remaining time.
7. Tmiem taċ-ċiklu: L-unità tieqaf awtomatikament meta t-tajmer jilħaq iż-żero.
8. Neħħi l-Oġġetti: Carefully remove the cleaning basket and rinse the cleaned items under clean water.
9. Itfi: Turn off the main power switch and unplug the unit when not in use.

5.2 Degassing Mode

The Degassing mode removes air bubbles from the cleaning solution, which can interfere with ultrasonic cavitation, making the cleaning process more efficient, especially with new solutions. Press the "DEGAS" button to activate this mode. It is recommended to run degassing for a few minutes before starting a cleaning cycle with fresh solution.

Figure 5.1: Visual representation of the degassing process, where air bubbles are removed from the cleaning solution to optimize ultrasonic performance.

5.3 Adjustable Oscillation

The unit offers 7 levels of oscillation intensity. This allows you to select a gentler cleaning for delicate items or a more powerful one for heavily soiled objects. Adjust the oscillation intensity using the dedicated knob or buttons on the control panel, if available, or by selecting the appropriate cleaning mode.

Figure 5.2: Illustration demonstrating the 7-level oscillation adjustment, allowing users to customize cleaning intensity for various items, from delicate jewelry to robust tools.

6. Manutenzjoni u Kura

Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tal-cleaner ultrasoniku tiegħek.

• Ixxotta t-Tank: After each use, especially if the solution is dirty, unplug the unit and carefully drain the liquid from the tank.
• Tindif tat-Tank: Wipe the inside of the tank with a soft cloth. For stubborn residues, use a mild detergent and rinse thoroughly. Do not use abrasive cleaners.
• Tindif ta' barra: Imsaħ il-parti ta 'barra tal-unità b'annunzjaamp drapp. Tużax kimiċi ħarxa.
• Ħażna: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• Spezzjoni regolari: Iċċekkja perjodikament il-korda tad-dawl u l-plagg għal kwalunkwe sinjali ta 'ħsara.

Figure 6.1: Demonstrates the visible cleaning effect of the ultrasonic cleaner on items like glasses, razor blades, and circuit boards, showing their improved cleanliness after use.

7 Issolvi l-problemi

If you encounter issues with your ultrasonic cleaner, refer to the following table:

8. Speċifikazzjonijiet

Detailed technical specifications for the CREWORKS 2L Digital Ultrasonic Cleaner:

Figure 8.1: Dimensional diagram of the ultrasonic cleaner and its cleaning basket, providing precise measurements for planning and usage.

9. Informazzjoni dwar Garanzija

This product comes with a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your purchase or contact CREWORKS customer support directly. Keep your proof of purchase for warranty validation.

10. Appoġġ għall-Klijent

For any questions, technical assistance, or service requests, please contact CREWORKS customer support. Contact information can typically be found on the product packaging, the official CREWORKS webis-sit, jew permezz tal-punt tax-xiri tiegħek.

Manifattur: Ekwipaġġi

ASIN: B0CTSVGC2Z