Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight. Please read these instructions thoroughly before beginning installation and retain them for future reference. This product is designed for use in existing 5 or 6-inch recessed can housings.
Informazzjoni dwar is-Sigurtà
TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-fjuż jew mis-circuit breaker qabel ma tinstalla jew tagħmel manutenzjoni.
- Dan il-prodott għandu jiġi installat skont il-kodiċi tal-installazzjoni applikabbli minn persuna familjari mal-kostruzzjoni u t-tħaddim tal-prodott u l-perikli involuti.
- Ensure the electrical rating of the fixture is compatible with your power supply (120 VAC).
- Do not modify or alter the fixture. Any modifications may void the warranty and create safety hazards.
- Adattat għal damp postijiet.
- ETL Listed for safety and quality assurance.
Kontenut tal-Pakkett
- 1 x Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight
- 1 x E-26 Quick Connect Adapter
Image: The Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight, showing the main unit, E-26 quick connect adapter, and the attached torsion springs.
Karatteristiċi
- Effiċjenti fl-Enerġija: 15W LED equivalent to 90W incandescent light, consuming less power.
- Luminożità Għolja: 1200 Lumens output for ample illuminazzjoni.
- 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using a switch on the fixture.
- Dimmable: Smooth dimming from 10% to 100% (compatible with most standard LED dimmers).
- Disinn kontra d-dija: Deep smooth recess baffle and anti-glare LED COB technology reduce harsh glare.
- CRI għoli: 90 CRI provides accurate color appearance.
- Kostruzzjoni Durabbli: Made with a cast aluminum body for lightweight and robust performance.
- Użu versatili: Suitable for residential and commercial installations, including damp locations like showers or bathrooms.
Image: An installed Maxxima downlight demonstrating its anti-glare design in a room setting.
Setup u Installazzjoni
Follow these steps to properly install your Maxxima LED Downlight. Ensure power is OFF before starting.
- Itfi l-Enerġija: Locate the circuit breaker or fuse box controlling the light fixture you are replacing and turn off the power.
- Prepare Existing Can: Remove the existing bulb and trim from your 5 or 6-inch recessed can housing.
- Agħżel it-Temperatura tal-Kulur (CCT): On the back of the LED downlight, locate the CCT selection switch. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. This setting can be changed later if needed.
- Connect E-26 Adapter: Connect the E-26 Quick Connect Adapter to the socket in your existing recessed can.
- Qabbad id-Downlight: Plug the quick connect cable from the LED downlight into the E-26 adapter.
- Daħħal fil-Landa: Carefully push the LED downlight into the recessed can. The torsion springs on the sides of the downlight will compress and hold the fixture securely in place against the ceiling. Ensure the springs engage with the torsion clips inside the can housing. If the light does not sit flush, ensure the existing socket is pushed up as far as possible or disconnected if it obstructs the fixture.
- Irrestawra l-Enerġija: Once the downlight is securely installed, restore power at the circuit breaker or fuse box.
Image: The CCT selection switch on the back of the downlight, allowing choice between 2700K, 3000K, 3500K, 4000K, and 5000K.
Image: The E-26 Quick Connect Adapter connected to the downlight's wiring.
Video: Official Maxxima installation guide for the 6-inch Anti-Glare Retrofit LED Downlight, demonstrating the CCT selection and installation process.
Istruzzjonijiet Operattivi
- Power On/Off: Uża s-swiċċ standard tal-ħajt tiegħek biex tixgħel jew titfi l-apparat tad-dawl.
- Għażla tat-Temperatura tal-Kulur: The CCT (Correlated Color Temperature) is set using a switch on the back of the fixture during installation. To change the CCT after installation, you must remove the fixture from the ceiling, adjust the switch, and then reinstall.
- Dimming: This downlight is dimmable from 10% to 100% with compatible LED dimmers. Ensure your dimmer switch is rated for LED lighting to avoid flickering or performance issues.
Manutenzjoni
- Tindif: To clean the fixture, ensure power is off. Use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Sostituzzjoni tal-bozza: This fixture features an integrated LED, meaning no bulb replacement is required. The LED is rated for 50,000 lifetime hours.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | No power, loose connection, faulty fixture. | Check circuit breaker. Ensure all connections are secure. If problem persists, contact support. |
| Id-dawl jitteptep jew jitbaxxa ħażin. | Incompatible dimmer, loose wiring. | Kun żgur li qed tuża dimmer kompatibbli mal-LED. Iċċekkja l-konnessjonijiet tal-wajers. |
| Fixture does not sit flush with the ceiling. | Torsion springs not properly engaged, obstruction in can, existing socket too low. | Ensure torsion springs are fully engaged with the can's clips. Check for any obstructions inside the can. Adjust the height of the existing socket or remove it if it interferes with the fixture's depth. Bend the torsion springs from near the tops to maintain tension if they have lost shape. |
Speċifikazzjonijiet
| Speċifikazzjoni | Dettall |
|---|---|
| Numru tal-Mudell | MRL-61505B |
| Daqs | 6 pulzier |
| Wattage | 15W |
| Output Lumen | 1200 Lumens |
| Temperatura tal-Kulur (CCT) | 2700K / 3000K / 3500K / 4000K / 5000K Selectable |
| Dimmable | 10% - 100% |
| CRI | 90 |
| Voltage | 120 VAC |
| Mifrux tar-raġġ | 36° |
| Dimensjonijiet | 7.1" L x 7.1" W x 4.5" H |
| Materjal | Aluminju |
| Sigħat ta' Ħajja | 50,000 sigħat |
| Ċertifikazzjonijiet | ETL Listed, T20 California Compliant |
| Użu fuq ġewwa/barra | Ġewwa (Damp Klassifikat) |
Garanzija
This Maxxima LED Downlight comes with a garanzija ta 'sena from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.
Appoġġ
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Maxxima customer service. Refer to the product packaging or the Maxxima websit għal informazzjoni ta' kuntatt attwali.
