Carson Easy Tyrann 670 Rescue RC Helicopter User Manual

Informazzjoni Importanti dwar is-Sigurtà

TWISSIJA! Not suitable for children under 16 years of age. Please retain these instructions for future reference. Illustrations may differ from the actual product contained in the packaging. TAMIYA-CARSON reserves the right to make improvements and modifications at any time.

Always operate the helicopter in a safe environment, away from people, animals, and obstacles. Do not fly near power lines, roads, or water. Ensure the battery is fully charged before each flight. Do not attempt to modify the helicopter or its components.

Prodott Overview

The Carson Easy Tyrann 670 Rescue is a 100% Ready-to-Fly (RTF) remote-controlled helicopter designed for ease of use, making it suitable for beginners. It features an electronic automatic take-off and landing function, three adjustable speed levels for varied flight agility, and switchable LED lights for enhanced visibility.

Kontenut tal-Pakkett

• Carson Easy Tyrann 670 Rescue RC Helicopter
• 2.4 GHz Remote Control Transmitter
• Cable tal-Iċċarġjar tal-USB
• Spare Main Rotor Blades
• Spare Tail Rotor Blade
• Tornavit Żgħir
• 4x Batteriji AA (għall-kontroll remot)

Image: The Carson Easy Tyrann 670 Rescue RC Helicopter, its remote control, USB charging cable, spare rotor blades, a small screwdriver, and four AA batteries.

Setup

1. Iċċarġjar tal-Batterija tal-Ħelikopter

1. Ensure the helicopter's power switch is in the OFF position.
2. Connect the small end of the USB charging cable to the helicopter's charging port.
3. Connect the USB end of the cable to any standard USB power source (e.g., computer USB port, USB wall adapter).
4. The charging indicator light on the USB cable will illuminate (color may vary) during charging.
5. Charging typically takes approximately 60-90 minutes. The indicator light will turn off or change color when charging is complete.
6. Do not overcharge the battery. Disconnect the cable once charging is complete.

2. Installazzjoni ta 'batteriji tal-kontroll mill-bogħod

1. Sib il-kompartiment tal-batterija fuq wara tal-kontroll remot.
2. Using the provided screwdriver, open the battery compartment cover.
3. Insert the four (4) AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Ibdel l-għatu tal-kompartiment tal-batterija u waħħalha bil-kamin.

Istruzzjonijiet Operattivi

1. Tqabbil tal-Kontroll mill-bogħod

1. Ensure the helicopter battery is charged and the remote control has fresh batteries.
2. Poġġi l-ħelikopter fuq wiċċ ċatt u livellat.
3. Turn on the helicopter's power switch. The helicopter's lights will flash.
4. Ixgħel is-swiċċ tal-enerġija tal-kontroll remot.
5. Push the left joystick (throttle) all the way up, then pull it all the way down. The remote control will beep, and the helicopter's lights will stop flashing, indicating successful pairing.

2. Tluq u Inżul Awtomatiku

• Tlugħ: After pairing, press the "Take Off" button on the remote control. The helicopter will automatically ascend to a stable hovering altitude.
• Inżul: During flight, press the "Land" button. The helicopter will automatically descend and land gently.

3. Kontrolli tat-Titjira

• Joystick tax-Xellug (Throttle): Push up to increase altitude, pull down to decrease altitude.
• Joystick tal-Lemin (Direzzjonali): Imbotta 'l quddiem biex ittir 'il quddiem, iġbed lura biex ittir lura. Imbotta lejn ix-xellug biex ittir lejn ix-xellug, imbotta lejn il-lemin biex ittir lejn il-lemin.
• Buttuni tat-Trim: Use the small trim buttons next to the joysticks to fine-tune the helicopter's stability if it drifts in any direction during hover.

4. Modi ta' Veloċità

The helicopter has three speed levels for different flight experiences. Press the speed button on the remote control to cycle through the modes (e.g., slow, medium, fast). A beep or light indicator on the remote may confirm the selected speed.

5. Dwal LED

The helicopter's LED lights can be switched on or off using the dedicated light button on the remote control. This feature is particularly useful for flying in low-light conditions.

6. Waqfien ta 'Emerġenza

In case of an emergency, press and hold the "Long Press Emergency Stop" button on the remote control to immediately cut power to the rotors. Use this function only when necessary to prevent damage or injury.

Manutenzjoni

Tindif

Wipe the helicopter and remote control with a soft, dry cloth after each use. Do not use water or chemical cleaners, as this may damage the electronic components.

Sostituzzjoni tax-xafra tar-rotor

If rotor blades become damaged, they can be replaced using the spare blades provided. Carefully remove the small screw holding the damaged blade in place, replace it with a new one, and secure the screw. Ensure the correct blade (A or B) is installed in its designated position.

Issolvi l-problemi

Speċifikazzjonijiet

• Numru tal-Mudell: 500507183
• Dimensjonijiet (L x W x H): 71 x 12 x 25 ċm
• Piż: 1.18 kg
• Età Rakkomandata: 16 snin 'il fuq
• Helicopter Power Source: Batterija rikarikabbli (permezz tal-USB)
• Remote Control Power Source: 4x Batteriji Alkalini AA (inklużi)
• Materjal Prinċipali: Plastic, Aluminum (chassis, tail boom)
• Kulur: Multicolor
• Approximate Flight Duration: Sa 10 minuta
• Karatteristiċi Speċjali: Automatic Take-off/Landing, 3 Speed Levels, Switchable LED Lights, Gyroscope Stabilization, 2.4 GHz Interference-Free Transmitter.

Garanzija u Appoġġ

For warranty information, technical support, or spare parts inquiries, please refer to the official Carson website or contact your local retailer. Please have your model number (500507183) and proof of purchase ready when contacting support.