1. Introduzzjoni
The Stetsom STX2448 FLOATING PRO is an advanced digital signal processor (DSP) designed for professional audio applications, particularly in car audio systems. This device offers comprehensive control over audio signals, including crossover functions, graphic equalization, remote sequencing, subharmonic bass enhancement, and peak/RMS limiting. Its unique "Floating Mode" expands configuration possibilities, providing both Standard and PRO operational modes to suit diverse system requirements. This manual provides detailed instructions for the proper installation, operation, and maintenance of your STX2448 FLOATING PRO to ensure optimal performance and longevity.
Figura 1.1: Quddiem view of the Stetsom STX2448 FLOATING PRO Digital Signal Processor. This image shows the main display, control knob, input level adjustment, and output hotkeys.
2. Karatteristiċi ewlenin
The STX2448 FLOATING PRO incorporates several advanced features to enhance your audio experience:
- Verżjoni Aġġornata: An enhanced version of the standard STX2448, offering additional features for superior audio quality.
- Modalità Float: Provides distinct operational flows and features compared to standard DSPs, allowing for diverse audio stream and resource loading. Available in Standard and PRO modes.
- Dual Input Types: Supports both RCA and High Signal inputs (for factory car stereos) on shared channels A & B.
- Aġġustament tal-Livell tad-Dħul: Allows precise control over input audio signals, with CLIP LEDs to indicate signal saturation on channels A & B.
- Improved Encoder Button: Features rotation and click actions for intuitive navigation through device configurations.
- Ekwalizzatur Grafiku ta' 15 Band: For precise audio tuning.
- Remote Sequencer: Manages power-on sequencing for connected components.
- Subharmonic Bass: Ittejjeb ir-rispons ta' frekwenza baxxa.
- Limiter Peak & RMS: Protects speakers and amplifiers from signal clipping.
Figure 2.1: Visual representation of the STX2448 FLOATING PRO's main features, including robust connectors, RCA & High Input, Input Level Adjustment, Encoder Button, and Floating Mode.
3. Setup u Installazzjoni
Proper installation is critical for the performance and safety of your STX2448 FLOATING PRO. Ensure all connections are secure and correctly polarized.
3.1. Konnessjonijiet tad-Dħul u l-Ħruġ
The processor supports two types of audio inputs and provides four independent outputs.
- Input (1): The STX2448 FLOATING PRO features both RCA and HIGH (Wire Input) connections. Both input types share the same input channels (A and B). Select the appropriate input type based on your audio source.
- Output (2): It has 4 independent RCA outputs (L+R) designed for connecting to amplifiers and other audio devices. These outputs are processed according to the audio parameter changes configured by the user.
Important: Using RCA and HIGH INPUT connections simultaneously may generate unwanted noises or audio issues.
Figure 3.1: Detailed diagram of the main RCA and High-In (wire) input connections, along with the independent RCA outputs. Note the positive (blue wire) and negative (gray wire) for High-In.
3.2. Power and Remote Connections
Connect the power and remote wires as shown in the diagram below. Ensure proper gauge wiring and fuse protection.
- Pożittiv (+): Use a 13 AWG cable. Connect to the positive terminal of the battery. Install a 1A fuse within 30cm (12 inches) of the battery.
- Negattiv (-): Use a 13 AWG cable. Connect to a good chassis ground point.
- REM (Remote In): Use an 18 AWG cable. Connect to the remote output of your head unit (radio/player) to turn the DSP on and off with your audio system.
- Sequencer (S1, S2, S3): These outputs are used to control the power-on sequence of connected amplifiers, ensuring a smooth system startup.
Figure 3.2: Comprehensive wiring diagram illustrating the power, ground, remote, and sequencer connections from the STX2448 FLOATING PRO to the car battery, radio, and ampliifikaturi.
4. Istruzzjonijiet Operattivi
The STX2448 FLOATING PRO is controlled via its front panel display and encoder button, offering intuitive navigation through its various settings.
4.1. Wiri u Navigazzjoni
The blue LCD screen displays menu options and current settings. The encoder button, located on the right side of the unit, allows you to scroll through menus by rotating and select options by pressing.
Figura 4.1: Angolat view highlighting the digital display and the multi-function encoder button for menu navigation and setting adjustments.
4.2. Floating DSP Mode
The unique Floating DSP mode offers two primary configurations:
- Standard STD Mode: Includes Input Gain, Graphic EQ 15-Band, Graphic EQ Presets, Output Parametric Equalizers, Routing, Crossover, Delay/Alignment, Phase Inversion, RMS Limiter, Output Gain, and Mute.
- Modalità PRO: Expands on the Standard mode by adding Sub Harmonic Bass, Output Parametric Equalizers, Routing, Crossover, Delay/Alignment, Phase Inversion, Peak Limiter, RMS Limiter, Output Gain, and Mute.
Refer to the on-screen menu for specific adjustments within each mode.
Figure 4.2: Block diagrams showing the signal flow and available features in both Standard and PRO Floating DSP modes.
4.3. Input Level Adjustment
Adjust the input level using the dedicated knob. The two LEDs (CLIP) next to the input level knob indicate if the input signal is saturated. Adjust the level until the CLIP LEDs do not illuminate, ensuring a clean signal.
4.4. Hotkeys
The four hotkeys (1, 2, 3, 4) provide quick access to specific functions, often related to output muting or limiter control. Refer to the on-screen prompts for their current assignments.
5. Manutenzjoni
To ensure the longevity and optimal performance of your STX2448 FLOATING PRO, follow these simple maintenance guidelines:
- Tindif: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, solvents, or harsh chemicals, as they can damage the finish or internal components.
- Ventilazzjoni: Ensure the unit has adequate ventilation. Do not block any vents or install the unit in an enclosed space without proper airflow.
- Kundizzjonijiet Ambjentali: Avoid exposing the unit to extreme temperatures, direct sunlight, high humidity, or excessive dust.
- Konnessjonijiet: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to signal loss or intermittent issues.
6 Issolvi l-problemi
If you encounter issues with your STX2448 FLOATING PRO, refer to the following common troubleshooting steps:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda Qawwa |
|
|
| Ebda Output Awdjo |
|
|
| Distorted Sound / Clipping |
|
|
| Unwanted Noise (Hiss, Whine) |
|
|
7. Speċifikazzjonijiet
Detailed technical specifications for the Stetsom STX2448 FLOATING PRO Digital Signal Processor:
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru ta 'Kanali ta' Input | 2 |
| Numru ta 'Kanali ta' Output | 4 |
| Gwadan tal-Input | -12 dB / +12 dB |
| Ekwalizzatur grafiku | 15 Bands, Gain ±12dB, customizable 12 presets |
| Subharmonic Bass | Frequency 20Hz - 120Hz and adjustable gain |
| Output Parametric Equalizer | Frequency 10Hz - 22kHz, Gain ±12dB, Q Factor 0.4 - 10.0 |
| Routing of Inputs to Outputs | A, B jew A+B |
| Crossover | HPF & LPF, Butterworth, Linkwitz-Riley, Bessel (6/12/18/24/36/48 dB/8ª) |
| Alignment/Delay | 0ms - 8ms (275cm) |
| Inverżjoni tal-Fażi | 0° - 180° |
| Limiter Peak | Threshold, Hold & Release |
| Limiter RMS | Threshold, Attack, Hold & Release |
| Qligħ tal-Produzzjoni | Master level 0% to 100% and gain ±15dB |
| Memorja | Auto-Save, 3 Memory Positions |
| Sigurtà | Security password of 4-digits |
| Generator Frequency Sweep | 10Hz - 22kHz and adjustable gain |
| Editable Text | Sa 15 karattri |
| Lingwi | Portugiż, Ingliż u Spanjol |
| Latency | 1.08ms |
| Impedenza tad-dħul | RCA In: 55K Ohms / HIGH In: 1K Ohms |
| Impedenza tal-ħruġ | 47 Ohms |
| Vol Input Massimutage | RCA In: 5V RMS / 14.1 Vpp / 10.2 dBu; HIGH In: 20V RMS / 56.6 Vpp / 26.2 dBu |
| Vol massimu tal-ħruġtage | 2V RMS / 5.6 Vpp / 8.2 dBu |
| Output Max Kurrent | 100 mA (per output) |
| Output Saturation Indicator | 1 per output (linked to the limiter) |
| Proporzjon tas-sinjal għall-istorbju | > 90dB |
| Distorsjoni Armonika Totali | <0.01% |
| Channels Separation | > 80dB |
| Rispons ta' Frekwenza | 10Hz - 22,500Hz @ -1dB |
| Provvista tal-Enerġija | 9V - 16V DC |
| Konsum Kurrenti Massimu | 350mA @ 12.6V DC |
| Dimensjonijiet (H x W x L) | 1.44" x 9.02" x 4.47" (36.5mm x 229mm x 113.5mm) |
| Piż | 1.10 lbs (0.50 kg) |
Figure 7.1: Physical dimensions (length, width, height) and weight of the STX2448 FLOATING PRO unit.
Figure 7.2: Comprehensive table of technical specifications, including audio parameters, power requirements, and physical characteristics.
8. Garanzija u Appoġġ
For warranty information, please refer to the documentation included with your product packaging or visit the official Stetsom website. Stetsom products are designed for reliability and performance, backed by a commitment to quality.
For technical support, frequently asked questions, or to download the latest software/firmware updates, please visit the official Stetsom websit: Stetsom Official Store on Amazon.
