1. Introduzzjoni
This manual provides comprehensive instructions for the safe and efficient operation of your Quality Heating 30L Double Electric Boiler. Please read all instructions carefully before installation and use, and retain this manual for future reference.
The Quality Heating 30L Electric Boiler is designed for efficient and reliable hot water supply. This electric boiler features an 'Extra Life' design, offering extended lifespan and high energy efficiency (Energy Class A).
With a 30-liter capacity and 1500 Watt power, this boiler includes simple, mechanical control. It features 40mm insulation with a conductivity coefficient of λ= 0.22, resulting in minimal heat loss (less than 0.2 °C per hour).
This electric boiler is suitable for various applications, including apartments, hair salons, riding schools, and garages, particularly in areas without gas connections. A 30-liter boiler can provide approximately 79 liters of hot water (at 37°C) when mixed with cold water, sufficient for one person's needs.
Figura 1: Quddiem view of the Quality Heating 30L Double Electric Boiler, displaying its energy efficiency rating and CE certification.
2. Informazzjoni dwar is-Sigurtà
Is-sigurtà tiegħek hija importanti ħafna. Jekk jogħġbok osserva l-linji gwida ta' sigurtà li ġejjin:
- Sigurtà Elettrika: Ensure the boiler is connected to a properly grounded 220 Volt electrical supply. Do not operate with damaged cords or plugs. Disconnect power before any maintenance or repair.
- Pressjoni tal-Ilma: The boiler is equipped with an overpressure protection system. Do not tamper mal-valv tas-sigurtà.
- Installazzjoni: L-installazzjoni għandha titwettaq minn professjonist kwalifikat skont ir-regolamenti lokali u l-kodiċijiet tal-plumbing.
- Temperatura: Hot water can cause severe burns. Exercise caution when using hot water and ensure children are supervised.
- Protezzjoni Interna: The boiler features 6 layers of advanced protection, including heat protection, dry-run protection, overpressure protection, corrosion protection, electrical protection, and thermostat control.
- Anode Tester: An anode tester with an alarm is integrated to monitor the sacrificial anode, which protects against corrosion.
Figure 2: Cross-section diagram illustrating the multi-layered protective construction of the boiler, including the aluminum casing, enamel coating, magnesium anode, steel tank, external insulation, and thermal protection.
3. Setup u Installazzjoni
Proper installation is crucial for the safe and efficient operation of your electric boiler. It is recommended that installation be carried out by a certified technician.
3.1 Disimballaġġ
Carefully remove the boiler from its packaging. Inspect for any signs of damage. Report any damage to your supplier immediately.
3.2 Post tal-Immuntar
The boiler is designed for indoor wall mounting. Choose a location that is:
- Capable of supporting the boiler's weight when full (18 kg dry weight + 30 kg water = 48 kg).
- Protetti mit-temperaturi tal-friża.
- Easily accessible for maintenance and operation.
- Close to water supply and electrical connections.
3.3 Dimensjonijiet
The product dimensions are approximately 53 cm (Length) x 28 cm (Width) x 95 cm (Height).
Figure 3: Illustration of the boiler's dimensions (53 cm x 28 cm x 95 cm) and a technician performing wall installation, highlighting its space-saving design.
3.4 Konnessjonijiet tal-plaming
Connect the cold water inlet and hot water outlet pipes. Ensure all connections are watertight. Install the included safety valve on the cold water inlet according to local plumbing codes.
3.5 Konnessjoni Elettrika
Connect the boiler to a dedicated 220 Volt electrical circuit. Ensure the circuit is protected by an appropriate circuit breaker. The boiler uses a standard electrical cable for power supply.
4. Istruzzjonijiet Operattivi
The Quality Heating 30L Electric Boiler features a user-friendly digital control panel for temperature adjustment.
4.1 L-Istartjar Inizjali
- Ensure the boiler is completely filled with water before switching on the power. Open a hot water tap to allow air to escape until water flows steadily.
- Ixgħel il-provvista tal-enerġija elettrika għall-bojler.
- Id-displej diġitali se jixgħel.
4.2 Aġġustament tat-Temperatura
Use the control knobs on the front panel to set your desired water temperature. The digital display will show the current temperature setting. The adjustable temperature range is typically between 30°C and 75°C.
Figure 4: A user adjusting the digital control panel of the boiler, which allows temperature selection between 30°C and 75°C for personalized comfort.
4.3 Ċiklu tat-Tisħin
Once the desired temperature is set, the boiler will begin heating the water. The heating indicator (if present) will illuminate. The boiler will automatically maintain the set temperature.
5. Manutenzjoni
Regular maintenance ensures the longevity and efficiency of your Quality Heating boiler.
- Spezzjoni tal-Anodu: The boiler is equipped with an anode tester and alarm. If the alarm activates, it indicates that the sacrificial anode needs inspection or replacement. The anode protects the tank from corrosion. Consult a qualified technician for anode replacement.
- Tnixxif u Tindif: Periodically drain and flush the boiler to remove sediment buildup. This should be done by a qualified professional.
- Tindif Esterni: Naddaf il-barra tal-bojler b'ċarruta ratba u driegħ.amp drapp. Tużax tindif jew solventi li joborxu.
- Valv tas-Sigurtà: Periodically check the safety valve for proper operation. Refer to the safety valve manufacturer's instructions.
6 Issolvi l-problemi
If you encounter issues with your boiler, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda ilma sħun | Ebda provvista ta 'enerġija Termostat issettjat baxx wisq Ħsara fl-element tat-tisħin | Iċċekkja circuit breaker Aġġusta l-issettjar tat-termostat Ikkuntattja tekniku kwalifikat |
| Ilma sħun insuffiċjenti | Termostat issettjat baxx wisq Excessive hot water usage Akkumulazzjoni ta' sediment | Żid is-setting tat-termostat Allow time for reheating Schedule professional flushing |
| Ilma inixxi | Konnessjonijiet sfużi Valv tas-sigurtà difettuż Tank corrosion | Issikka l-konnessjonijiet Ibdel il-valv tas-sigurtà Ikkuntattja tekniku kwalifikat |
| Anode alarm active | Sacrificial anode needs inspection/replacement | Contact a qualified technician for anode service |
For problems not listed or if solutions do not resolve the issue, please contact Quality Heating customer support or a qualified service technician.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Tisħin ta 'Kwalità |
| Numru tal-Mudell | 287388955 |
| Kapaċità | 30 Litri |
| Dimensjonijiet (L x W x H) | 53 x 28 x 95 ċm |
| Piż | 18 Kilogrammi |
| Output ta 'Qawwa | 1500 Watts |
| Voltage | 220 Volts |
| Sors tal-Enerġija | Kejbil Elettriku |
| Stil ta 'installazzjoni | Indoor Wall Installation |
| Temperatura massima | Up to 75 Degrees Celsius (Adjustable) |
| Insulazzjoni | 40mm foam, λ= 0.22 conductivity coefficient |
| Effiċjenza tal-Enerġija | Klassi tal-Enerġija A |
| Karatteristiċi tas-Sigurtà | 6-layer protection, safety valve, anode tester with alarm |
| Pajjiż ta' Oriġini | Iċ-Ċina |
8. Garanzija u Appoġġ
8.1 Informazzjoni dwar Garanzija
This Quality Heating boiler comes with a 2-year warranty, supported within the EU. Please retain your proof of purchase for warranty claims.
8.2 Disponibbiltà ta' Spare Parts
Information regarding the availability of spare parts is currently not provided. Please contact customer support for inquiries about specific components.
8.3 Appoġġ għall-Klijent
For technical assistance, warranty claims, or any questions regarding your Quality Heating product, please contact your retailer or visit the official Quality Heating websit għad-dettalji ta' kuntatt tal-appoġġ.
