Phanteks XT View Manwal tal-Istruzzjonijiet tax-Chassis tal-Logħob Mid-Torri

1. Introduzzjoni

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Karatteristiċi ewlenin:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Ingravati Zip (30x)
  • MB/SSD Screws (30x)
  • Viti bil-kbir (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Setup u Installazzjoni

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View xażi.

3.1. Preparing the Chassis

1. Ippakkja: Carefully remove the chassis from its packaging.
2. Neħħi l-Panewijiet: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Immaġni 3.1: Intern view of the XT View chassis, ready for component installation.

3.2. Installazzjoni tal-Motherboard

1. Installa Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Poġġi l-Motherboard: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Motherboard Sikura: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Installazzjoni tal-Unità tal-Provvista tal-Enerġija (PSU)

1. Position PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Secure PSU: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Installazzjoni tad-Drajv tal-Ħażna

The chassis supports 3.5" HDDs and 2.5" SSDs.

• HDD ta' 3.5 pulzieri: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Installazzjoni tal-Karta tal-Espansjoni (GPU)

1. Neħħi l-Għotjien tas-Slott: Remove the necessary expansion slot covers from the rear of the chassis.
2. Daħħal il-Karta: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Karta Sikura: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Image 3.2: Rear interior view highlighting expansion slots and fan mounting points.

3.6. Installazzjoni tal-Fann u r-Radjatur

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Ġestjoni tal-Kejbil

Uża l-kanali tar-rottaġġ tal-kejbils u l-punti ta' rbit wara t-trej tal-motherboard biex torganizza l-kejbils. Dan itejjeb il-fluss tal-arja u l-estetika.

Stampa 3.3: Wara view illustrating cable management space.

3.8. Konnessjonijiet I/O ta 'quddiem

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• Header USB 3.0
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Istruzzjonijiet Operattivi

4.1. Power On/Off

Agħfas il- Buttuna tal-Qawwa located on the top front panel to turn the system on or off.

4.2. Front Panel Connectivity

The front I/O panel provides convenient access to:

• 1x USB 3.0 port
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Manutenzjoni

5.1. Tindif tal-Filtri tat-Trab

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Neħħi l-Filtri: Gently slide out or unclip the dust filters.
2. Naddaf: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Installa mill-ġdid: Place the clean, dry filters back into their positions.

5.2. Tindif Ġenerali

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6 Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista’ tiltaqa’ magħhom.

6.1. Is-Sistema Ma Tixgħelx

• Konnessjonijiet tal-Enerġija: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Konnessjonijiet tal-Motherboard: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Sinkronizzazzjoni tal-Motherboard: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Funzjonalità tal-buttuna: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Konnessjonijiet: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Ostruzzjonijiet: Check for any cables or objects obstructing fan blades.
• Trab: Clean any dust buildup on fan blades.

7. Speċifikazzjonijiet

8. Appoġġ u Garanzija

For additional information, technical support, or warranty inquiries, please visit the official Phanteks websit:

www.phanteks.com

Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.