1. Introduzzjoni
This manual provides detailed instructions for the setup, operation, and maintenance of your Edifier D32 Tabletop Bluetooth Speakers. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Figura 1.1: Quddiem view of the Edifier D32 Tabletop Bluetooth Speaker.
2. Karatteristiċi tal-prodott
- Kwalità tal-Ħoss Superjuri: Equipped with 60W RMS total output power, dual 1-inch silk dome tweeters, and 4-inch long-throw mid-low drivers for rich, room-filling stereo sound.
- Advanced Bluetooth Connectivity: Features Bluetooth V5.3 with LDAC codec support, enabling high-resolution audio streaming up to 24bit/96kHz from compatible Android devices.
- Konnessjoni b'ħafna punti: Allows simultaneous connection of two Bluetooth devices, facilitating seamless switching between audio sources.
- Ħajja Estiża tal-Batterija: Integrated 5200mAh high-capacity battery provides up to 11 hours of continuous playback on a single charge.
- Versatile Wireless Transmission: Includes a 5GHz and 2.4GHz dual-band Wi-Fi module with AirPlay2 support for Wi-Fi music streaming and multi-room audio system creation with multiple D32 speakers.
Figure 2.1: Illustration of the internal speaker components, highlighting the drivers.
Figure 2.2: Depiction of the advanced digital signal processing chip.
3. Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja l-kontenut tal-pakkett meta tiftaħ il-kaxxa. Jekk xi oġġetti huma nieqsa jew bil-ħsara, ikkuntattja lill-bejjiegħ tiegħek.
- Edifier D32 Tabletop Bluetooth Speaker
- Kejbil tal-Enerġija
- Audio Cable (3.5mm to 3.5mm)
- Cable USB
- Manwal għall-Utent (dan id-dokument)
Figure 3.1: Edifier D32 speaker, packaging, and accessories.
4. Setup
4.1 Konnessjoni tal-Enerġija
- Connect the power cable to the AC input port on the rear of the speaker.
- Ipplaggja t-tarf l-ieħor tal-kejbil tal-enerġija f'sokit standard tal-ħajt (100-240V ~ 50/60Hz).
- Press the power button on the speaker to turn it on. The indicator light will illuminate.
4.2 Tqegħid Inizjali
Place the speaker on a stable, flat surface. For optimal sound performance, ensure there are no obstructions directly in front of the speaker's grille.
Figure 4.1: Recommended placement of the speaker on a stable surface.
Figure 4.2: Rear panel with power input, AUX IN, and USB IN ports.
5. Istruzzjonijiet Operattivi
5.1 Buttuni tal-Kontroll
The control buttons are located on the front panel of the speaker.
Figura 5.1: Aktarview of control buttons and their functions.
- Power-on/off, Source switch: Press to power on/off, short press to cycle through input sources (Bluetooth, Wi-Fi, AUX, USB).
- Bluetooth connection control: Agħfas u żommha biex tidħol fil-modalità ta' pairing Bluetooth.
- Play/Pause, Mute/Unmute, WAC setup: Controls playback, mutes audio, or initiates Wireless Acoustic Calibration setup.
- Volume down, Previous track: Agħfas qasir biex tnaqqas il-volum, agħfas twil għat-trakka ta' qabel.
- Volume up, Next track: Agħfas qasir biex tgħolli l-volum, agħfas twil għat-trakka li jmiss.
5.2 Modalità Bluetooth
- Turn on the speaker and select Bluetooth mode by pressing the source switch button until the Bluetooth indicator light illuminates.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for "EDIFIER D32".
- Select "EDIFIER D32" to pair. Once connected, the indicator light will remain solid.
- For multi-point connection, repeat steps 2 and 3 with a second Bluetooth device.
Figure 5.2: Bluetooth V5.3 with LDAC support for high-fidelity audio.
5.3 Wi-Fi Mode (AirPlay2)
- Ensure the speaker is connected to power and turned on.
- On your iOS device, open the Wi-Fi settings and select "EDIFIER D32" under "SET UP NEW AIRPLAY SPEAKER...".
- Follow the on-screen prompts to connect the speaker to your home Wi-Fi network.
- Once connected, you can stream audio via AirPlay2 from any compatible device on the same network.
- Multiple D32 speakers can be grouped for a multi-room audio experience via the Edifier ConneX App.
5.4 Modalità tad-Dħul AUX
- Connect one end of the 3.5mm audio cable to the AUX IN port on the rear of the speaker.
- Connect the other end of the 3.5mm audio cable to the audio output jack of your source device (e.g., computer, MP3 player).
- Press the source switch button on the speaker until the AUX indicator light illuminates.
5.5 USB Input Mode
- Connect the USB cable to the USB IN port on the rear of the speaker.
- Connect the other end of the USB cable to a USB audio output port on your computer or other compatible device.
- Press the source switch button on the speaker until the USB indicator light illuminates.
5.6 Edifier ConneX App
Download the Edifier ConneX App from your device's app store for enhanced control, equalization adjustments, and multi-room setup features.
Figure 5.3: Edifier ConneX App for advanced control.
6. Manutenzjoni
- Tindif: Uża drapp artab u niexef biex tnaddaf il-wiċċ tal-ispiker. Tużax prodotti tat-tindif, xama' jew solventi li joborxu.
- Ħażna: Meta ma tkunx qed tużah għal perjodi twal, aħżen l-ispiker f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Kura tal-batterija: Biex ittawwal il-ħajja tal-batterija, evita li tiċċarġja kompletament il-batterija ta' spiss. Iċċarġja l-ispiker regolarment, anke jekk ma jkunx qed jintuża b'mod attiv.
- Ventilazzjoni: Ensure proper ventilation around the speaker to prevent overheating. Do not block any vents.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda qawwa | Power cable not connected; Battery depleted. | Ensure power cable is securely connected and plugged into a live outlet. Charge the speaker if using battery power. |
| L-ebda ħoss | Incorrect input source selected; Volume too low; Device not paired (Bluetooth); Cable not connected (AUX/USB). | Select the correct input source. Increase volume on both speaker and source device. Re-pair Bluetooth device. Check cable connections. |
| Konnessjoni Bluetooth instabbli | Device too far from speaker; Interference. | Move device closer to the speaker. Avoid placing speaker near other wireless devices that may cause interference. |
| Kwistjonijiet ta 'konnessjoni Wi-Fi | Incorrect Wi-Fi password; Router issues; Speaker out of range. | Verify Wi-Fi password. Restart router. Move speaker closer to Wi-Fi router. |
| Ħajja qasira tal-batterija | Battery not fully charged; High volume usage. | Ensure battery is fully charged before use. Lower volume to extend battery life. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | D32white |
| Brand | Edifikatur |
| Qawwa tal-Ħruġ Totali | 60W RMS |
| Tweeter | Dual 1" Silk Dome Tweeters |
| Sewwieq Nofs-Baxx | 4" Long-Throw Mid-Low Drivers |
| Verżjoni Bluetooth | V5.3 (with LDAC codec support) |
| Wi-Fi | 5GHz and 2.4GHz Dual-Band (AirPlay2 compatible) |
| Kapaċità tal-batterija | 5200mAh Lithium Ion |
| Ħin tal-logħob | Sa 11 sigħat |
| Tip ta' Port tal-Iċċarġjar | USB |
| Dimensjonijiet tal-Prodott (W x H x D) | 16.2 x 25 x 17.9 ċm |
| Piż tal-oġġett | 3.1 kg |
| Materjal | Wood (Holz) |
9. Garanzija u Appoġġ
Edifier products come with a standard warranty. Please refer to the warranty card included in your package for specific terms and conditions, or visit the official Edifier websit għal informazzjoni dettaljata dwar il-garanzija.
Għal appoġġ tekniku, assistenza għas-soluzzjoni ta' problemi, jew mistoqsijiet dwar is-servizz, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti ta' Edifier permezz tal-uffiċjal tagħhom. webis-sit jew l-informazzjoni ta' kuntatt ipprovduta fl-imballaġġ tal-prodott tiegħek.
- Perjodu ta' Garanzija: Tipikament sena mid-data tax-xiri.
- Politika tar-Ritorn: Refer to your retailer's policy, typically 30 days for refunds/replacements.
- Appoġġ onlajn: Żur www.edifier.com for FAQs, drivers, and support contact.
