Manwal tal-Utent tal-Pixxina Strutturali INTEX Prism 8,592 Litri

Introduzzjoni

This manual provides essential instructions for the safe assembly, operation, and maintenance of your INTEX Prism 8,592 Liters Structural Pool. Please read all instructions carefully before setup and use to ensure proper function and safety. Retain this manual for future reference.

Image: The INTEX Prism Structural Pool, showcasing its complete setup including the pool, filter pump, and safety ladder, with individuals enjoying the pool.

Informazzjoni dwar is-Sigurtà

TWISSIJA: In-nuqqas ta' segwitu ta' dawn l-istruzzjonijiet jista' jirriżulta fi korriment serju jew mewt.

• Superviżjoni tal-adulti Meħtieġa: Always provide active adult supervision to children and individuals with disabilities in and around the pool.
• Ebda Għadds: This pool is not designed for diving. Shallow water can cause serious injury.
• Żona Ċara: Keep children away from the pool cover to avoid entanglement. Ensure the area around the pool is clear of obstacles.
• Użu Kimiku: Handle pool chemicals according to manufacturer instructions. Improper use can cause skin and eye irritation.
• Sigurtà Elettrika: Connect the filter pump to a grounded 110v outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords.
• Sigurtà tas-Sellum: Use the ladder only for entering and exiting the pool. Do not allow children to play on the ladder.

Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti qabel tibda l-assemblaġġ:

• 1 x INTEX Prism Structural Pool Liner (8,592 Liters capacity)
• 1 x INTEX Filter Pump (2,006 Liters/hour, 110v)
• 1 x INTEX Safety Ladder
• Complete Metal Frame Components (legs, horizontal beams, pins)
• Pajpijiet u Clamps for Filter Pump Connection
• Ground Cloth (may be included or recommended separately)

Setup Istruzzjonijiet

1. Għażla tas-Sit: Choose a firm, level surface for pool installation. The area must be free of sharp objects, debris, and have adequate drainage. Ensure the ground can support the weight of the filled pool.
2. Tqegħid tad-Drapp tal-Art: Lay the ground cloth (if included) on the selected site. This protects the pool liner from punctures.
3. Assemblaġġ tal-qafas: Following the diagrams provided in the separate assembly guide, connect all metal frame components. Ensure all T-joints, horizontal beams, and vertical legs are securely interlocked with the spring-loaded pins.
4. Installazzjoni tal-inforra: Carefully spread the pool liner within the assembled frame. Position the drain plug away from the main traffic area. Smooth out any major wrinkles in the bottom of the liner.
5. Konnessjoni tal-Pompa: Qabbad il-pompa tal-filtru mal-portijiet tad-dħul u tal-ħruġ magħżula fuq il-kisi tal-pixxina billi tuża l-pajpijiet u l-klampi pprovduti.amps. Kun żgur li l-konnessjonijiet kollha huma ssikkati biex tevita t-tnixxijiet.
6. Assemblea tas-Sellum: Assemble the safety ladder according to its specific instructions. Place the ladder securely against the pool.
7. Mili tal-pool: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner from the center outwards. Stop filling when the water reaches the recommended level, typically just below the top frame rail.

Image: The INTEX Prism Structural Pool fully assembled and filled with water in a garden setting, with individuals enjoying the pool.

Image: The INTEX Prism Structural Pool fully assembled and filled with water, situated in a garden environment.

Istruzzjonijiet Operattivi

1. Tħaddim Inizjali tal-Pompa: Ensure the filter pump is properly connected to the pool and a grounded 110v GFCI outlet. Open all valves to allow water flow. Turn on the pump. It may take a few moments for water to circulate and air to purge from the system.
2. Operazzjoni ta' Kuljum: Run the filter pump for 2-4 hours daily to maintain water circulation and filtration. The exact duration may vary based on pool usage, water clarity, and environmental conditions.

Manutenzjoni

• Kimika tal-Ilma: Regularly test your pool water's pH and chlorine levels using a pool test kit. Maintain pH between 7.2 and 7.6, and chlorine levels between 1-3 ppm. Adjust as needed with appropriate pool chemicals.
• Tindif: Skim debris (leaves, insects) from the water surface daily. Vacuum the pool floor as necessary to remove settled dirt and particles.
• Skartoċċ tal-filtru: Turn off and unplug the filter pump before cleaning or replacing the filter cartridge. Clean or replace the filter cartridge every 2 weeks, or more frequently with heavy pool use or if water appears cloudy.
• Winterization: For regions with freezing temperatures, consult local guidelines for proper pool winterization procedures to prevent damage to the pool and equipment.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

For detailed warranty information, product registration, or customer support, please refer to the documentation included with your INTEX Prism Structural Pool. It is recommended to keep your original purchase receipt as proof of purchase for any warranty claims. You may also visit the official INTEX webis-sit għal aktar assistenza u informazzjoni ta' kuntatt.