Manwal tal-Istruzzjonijiet tal-Ispeakers Bluetooth Herdio ta' 6.5 Pulzieri għal Ġewwa u Barra HOS-602WBT

1. Introduzzjoni

Thank you for choosing Herdio 6.5-inch Indoor Outdoor Bluetooth Speakers. This manual provides essential information for the proper setup, operation, and maintenance of your speakers. Please read it thoroughly before use to ensure optimal performance and longevity of your product.

These speakers are designed for versatile use, featuring Bluetooth 5.3 connectivity, IP66 marine-grade waterproofing, and a 2-way full-range audio system with a 6.5-inch woofer and 1.0-inch PET dome tweeter.

2. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• 2 x Herdio 6.5-inch Indoor Outdoor Speakers (1 active, 1 passive)
• 1 x PWR-24V3A-US Power Adapter
• 1 x 16FT/5M Speaker Cable
• 1 x Manwal tas-Sid (dan id-dokument)
• Mounting Brackets and Hardware (screws/nails)

3. Istruzzjonijiet ta' Setup

3.1. Immuntar tal-Kelliema

The speakers come with adjustable mounting brackets for wall installation. Ensure the mounting surface is sturdy enough to support the weight of the speakers.

1. Remove the Bracket: Turn the knob on the side of the speaker counter-clockwise to loosen and remove the mounting bracket.
2. Sikura l-Bracket: Position the bracket on your desired mounting location. Use appropriate nails or screws (provided) to securely fix the bracket to the wall.
3. Ehmeż l-Ispeaker: Place the speaker onto the secured bracket. Tighten the knob clockwise to firmly secure the speaker in place. Adjust the speaker angle as needed before fully tightening.

3.2. Wiring the Speakers

The system includes one active speaker (with amplifier and Bluetooth) and one passive speaker. The passive speaker connects to the active speaker using the provided speaker cable.

1. Qabbad Kejbil tal-Ispeaker: Identify the speaker cable (red for positive, black for negative). Connect the red wire to the red terminal and the black wire to the black terminal on both the active and passive speakers. Ensure a secure connection.
2. Konnessjoni tal-Enerġija: Plug the PWR-24V3A-US power adapter into the DC 24V IN port on the active speaker. Then, plug the power adapter into a suitable power outlet.

3.3. Tqabbil tal-Bluetooth

Once powered on, the active speaker will enter Bluetooth pairing mode, indicated by an audible prompt.

1. Attiva l-Bluetooth: Fuq l-apparat mobbli tiegħek (smartphone, tablet, laptop), attiva l-Bluetooth.
2. Agħżel Apparat: Fittex għal available Bluetooth devices. You should see 'HOS602' in the list. Select it to initiate pairing.
3. Ikkonferma l-Konnessjoni: Once paired, an audible confirmation will sound, and your device will show 'HOS602' as connected for media audio.

3.4. Tqabbil ta' Stereo Wireless Veru (TWS)

For a stereo configuration with two active speakers (purchased separately), use the TWS function.

1. Power On Both Speakers: Ensure both active speakers are powered on and in Bluetooth pairing mode.
2. Activate TWS: On the back of one active speaker, locate the TWS/Reset button. A short press will illuminate the light and activate TWS functionality. The speakers will automatically attempt to pair with each other.
3. Qabbad mal-Apparat: Once the two active speakers are paired in TWS mode, connect your mobile device to one of the speakers via Bluetooth as described in Section 3.3.

4. Istruzzjonijiet Operattivi

4.1. Operazzjoni Bażika

After successful Bluetooth pairing, you can control music playback directly from your connected device. Adjust volume, skip tracks, and pause/play using your device's media controls.

4.2. Tixgħil / Mitfi

The speakers power on automatically when connected to the power adapter and power is supplied. To power off, disconnect the power adapter from the outlet.

5. Manutenzjoni

5.1. Tindif

Imsaħ il-kelliema b'soft, damp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or internal components.

5.2. Impermeabilizzazzjoni

The speakers feature an IP66 marine-grade waterproof rating, making them suitable for outdoor use in various weather conditions, including rain and snow. The Bluetooth motherboard is also coated with triple-proof paint for added protection against moisture.

5.3. Power Adapter Care

The provided power adapter is generally designed for indoor use. If installing the speakers outdoors, ensure the power adapter is protected from direct exposure to rain, snow, or extreme moisture. Consider housing it in a weatherproof enclosure if outdoor placement is unavoidable.

6 Issolvi l-problemi

• Ebda Qawwa: Ensure the power adapter is securely plugged into both the active speaker and a working power outlet. Check if the outlet has power.
• Ebda Ħsejjes: Verify that the speakers are properly wired (red to red, black to black). Ensure your Bluetooth device is connected and the volume is turned up on both the device and the speakers.
• Kwistjonijiet ta' Tqabbil tal-Bluetooth: Make sure the speakers are in pairing mode. If you have previously paired the speakers with another device, disconnect them from that device first. Try restarting your Bluetooth device and the speakers.
• Kwistjonijiet ta' Tqabbil tat-TWS: Ensure both speakers are active and within range. Perform a system reset if TWS pairing fails repeatedly.
• Irrisettja Sistema: To restore the active speaker to factory settings, press and hold the TWS/Reset button on the back of the master unit for 3 seconds.

7. Speċifikazzjonijiet

8. Gwida bil-Vidjo

For a visual demonstration of the setup and features, please refer to the official product video below:

9. Garanzija u Appoġġ

Herdio products are manufactured with quality and performance in mind. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Herdio website. If you encounter any issues or require technical assistance, please contact Herdio customer support through their official channels.