Manwal tal-Utent tal-Kit tal-Għodda Rotatorja mingħajr Fili WORKPRO

1. Introduzzjoni

This manual provides essential information for the safe and effective use of your WORKPRO Cordless Rotary Tool Kit. Please read it thoroughly before operation and retain it for future reference.

Immaġni: Il-Kit tal-Għodda Rotatorja Mingħajr Fili WORKPRO, wirjaasing the main tool and its comprehensive set of 71 accessories.

2. Informazzjoni dwar is-Sigurtà

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This tool is designed for light-duty applications on soft materials. Do not use it for heavy-duty tasks or on hard materials that may cause excessive strain or damage.

• Wear appropriate personal protective equipment, such as safety glasses, during operation.
• Kun żgur li l-biċċa tax-xogħol tkun clamped before beginning any work.
• Żomm idejk u ħwejjeġ maħlula 'l bogħod mill-partijiet li jduru.
• Tħaddimx l-għodda f'post damp jew kundizzjonijiet imxarrba.
• Store the tool and accessories in a dry, secure place out of reach of children.

3. Kontenut tal-Pakkett

Il-Kit tal-Għodda Rotatorja Mingħajr Fili WORKPRO tiegħek jinkludi l-oġġetti li ġejjin:

• WORKPRO Cordless Rotary Tool
• 71-piece accessory kit, including:
• Ġebel tat-tħin
• Inċiżjoni bits
• Drill bits
• Ċineg tax-xkatlar
• Roti tal-lostru
• Pinzell tal-metall
• Diski li jaqtgħu
• Każ tal-ħażna
• Cable tal-Iċċarġjar tal-USB tat-Tip-Ċ

Immaġni: Dettaljata view of the WORKPRO 3.6V Electric Rotary Tool Set, highlighting the 71-piece accessory kit for various applications like grinding, carving, polishing, cutting, sanding, and engraving.

4. Prodott Aktarview

Iffamiljarizza ruħek mal-komponenti tal-għodda rotatorja tiegħek:

Image: A diagram illustrating the key components of the portable electric rotary tool, including the Collet Nut, Collet, Speed Locking Button, Ventilation Holes, Speed Control Indicator, ON/OFF Switch & Speed Control Button, and Charging Port.

• Swiċċ ON/OFF u Buttuna tal-Kontroll tal-Veloċità: Used to power the tool on/off and adjust speed.
• Indikatur tal-Kontroll tal-Veloċità: Juri l-issettjar tal-veloċità kurrenti.
• Kollet: Holds the accessory securely.
• Ġewż tal-Collet: Secures the collet and accessory.
• Buttuna tal-illokkjar tal-veloċità: Locks the spindle for accessory changes.
• Toqob tal-ventilazzjoni: Dissipate heat for prolonged tool life.
• Port tal-Iċċarġjar: Port USB tat-Tip C biex terġa' tiċċarġja l-batterija interna.

5. Setup

5.1 Iċċarġjar tal-Għodda

The tool is powered by a 4V Li-ion 900mAh battery and is USB rechargeable. Use the provided Type-C charging cable to charge the tool.

Image: The WORKPRO rotary tool connected to a laptop via a USB-C cable, illustrating the charging process. The tool's indicator lights show charging status (two lights for charging, three for fully charged).

Jekk jogħġbok Innota:

• Għall-ħażna, huwa ssuġġerit li terġa 'tiċċarġja l-batterija bejn 50% u 75% ħlas.
• Charge the device at least once every 3-6 months to preserve battery life span.

5.2 Aċċessorji twaħħil

The tool supports two collet sizes: 3/32" and 1/8".

Image: A three-step visual guide demonstrating how to change accessories on the rotary tool: 1. Press the shaft lock, 2. Unscrew the collet nut, 3. Tighten the black nut after inserting the new accessory.

1. Press the Speed Locking Button to lock the spindle.
2. Unscrew the Collet Nut.
3. Insert the desired accessory into the collet.
4. Tighten the Collet Nut securely.

Attaching Cutting Wheel and Sanding Paper

Image: A four-step visual guide showing how to attach a cutting wheel or sanding paper to the rotary tool's mandrel. Steps include screwing the top piece, placing the disc, screwing the bottom piece, and inserting into the tool.

Attaching Sanding Band

Image: A four-step visual guide demonstrating how to attach a sanding band to the rotary tool. Steps include screwing the mandrel, sliding the sanding band onto the mandrel, and inserting the assembly into the tool.

Attaching Felt Wheel

Image: A visual guide showing how to attach a felt polishing wheel to the rotary tool's screw-type mandrel by screwing it on.

6. Operazzjoni

6.1 Ixgħel/Itfi u Aġġustament tal-Veloċità

The tool features 3 variable speeds for different applications.

Image: A visual representation of the WORKPRO rotary tool's 3 adjustable speed levels (12000 RPM, 14000 RPM, 17000 RPM) and instructions for operation: Long Press for ON/OFF, Short Press for Speed Switch.

1. Li jduru ON l-għodda, PRESSA TWIL il-buttuna tal-enerġija.
2. Biex taġġusta l-veloċità, PRESSA QASIRA the power button. The speed settings are 12000 RPM, 14000 RPM, and 17000 RPM.
3. Li jduru OFF l-għodda, PRESSA TWIL il-buttuna tal-qawwa mill-ġdid.

6.2 Applikazzjonijiet

This mini rotary tool is a high-speed, low-torque tool, recommended for light-duty applications on soft materials. It is suitable for a variety of DIY tasks:

Image: A collage showing the WORKPRO rotary tool being used for various multi-purpose applications: Sanding (on wood), Cutting (plastic pipe), Carving (on wood), Polishing (metal hook), Grinding (wood block), and Drilling (wood slice and glass bottle).

• Inċiżjoni: Engrave metal, glass, wood, and other soft materials.
• Xkatlar: Smooth rough surfaces on wood, plastic, and fiberglass.
• Illustrar: Polish jewelry, metal, and other items to a shine.
• Inċiżjoni: Create intricate designs on wood, nutshell crafts, ceramics, and glass.
• Qtugħ: Cut plastic, thin wood boards, PVC, and cans.
• Tħaffir: Make small holes in softwood boards, plastic, PVC, and other materials.

Image: The WORKPRO rotary tool being used for fine carving on a wooden sculpture, emphasizing its high concentricity for precise control compared to low concentricity tools.

7. Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-għodda tiegħek.

• Tindif: Wara kull użu, imsaħ l-għodda b'ċarruta nadifa u niexfa biex tneħħi t-trab u l-fdalijiet. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• Kura tal-batterija: As noted in the charging section, maintain battery health by charging between 50-75% for storage and recharging every 3-6 months.
• Ħażna ta' Aċċessorji: Store all accessories in the provided case to prevent loss and damage.
• Ventilazzjoni: Ensure the ventilation holes remain clear of obstructions to prevent overheating.

Immaġni: Close-up view of the ventilation holes on the WORKPRO rotary tool, indicating their function in heat dissipation.

8 Issolvi l-problemi

If you encounter issues with your WORKPRO Cordless Rotary Tool, refer to the following common problems and solutions:

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

For warranty information or technical support, please refer to the product packaging or contact WORKPRO customer service directly. Specific warranty details are not provided in this manual.