Transformers Legacy United Deluxe Class G1 Universe Optimus Prime Instruction Manual

1. Informazzjoni dwar is-Sigurtà

TWISSIJA: PERIKLU TA’ FGATAR – Jistgħu jiġu ġġenerati partijiet żgħar. Mhux għal tfal taħt it-3 snin.

2. Prodott Aktarview

The Transformers Legacy United Deluxe Class G1 Universe Optimus Prime is a 5.5-inch action figure inspired by the Transformers G1 animated series. This figure converts between robot and truck modes in 16 steps and features articulated head, arms, and legs for dynamic posing.

Karatteristiċi:

• 5.5-inch (14 cm) G1 Universe Optimus Prime action figure.
• Converts between robot and truck modes in 16 steps.
• Includes blaster accessory that attaches in both modes.
• Articulated head, arms, and legs for action poses.
• Inspired by the Transformers G1 animated series, featuring a toy-accurate head sculpt and translucent windows.

X'inhu Inkluż:

• 1x Optimus Prime Figure
• 2x Blaster Accessories (one normal, one bloated)
• 1x Translucent Blue Matrix of Leadership Accessory
• 1x Aċċessorju tal-Mannara tal-Energon

3. Setup and Accessories

Upon unboxing, ensure all components are present. The Optimus Prime figure comes with several accessories to enhance play and display.

Image: Optimus Prime figure with included blaster, Energon axe, and Matrix of Leadership, displayed alongside its packaging.

Aċċessorju Aċċessorju:

• Blasters: Both blaster accessories can be held in either of Optimus Prime's hands. One blaster is blast effect compatible.
• Energon Axe: The Energon axe slides over Optimus Prime's fist.
• Matrix of Leadership: The translucent blue Matrix of Leadership can be placed inside Optimus Prime's chest compartment. To access, gently pull down the chest plate.

4. Transformation Instructions

The Optimus Prime figure converts between robot and truck modes in 16 steps. Follow the instructions carefully to ensure proper transformation.

Robot to Truck Mode (16 Steps):

1. Remove all accessories from the figure.
2. Open the back section of the figure and fold the head down and around, then close the back section.
3. Rotate the fists inward and fold them into the forearms.
4. Bring the arms forward and snap them into place over the chest section, forming the cab's sides.
5. Fold the legs up and back to form the truck's rear section. Ensure the tabs on the legs align with the slots in the thigh area.
6. Snap the leg sections together to complete the truck mode.

Image: Optimus Prime in its complete truck mode, with accessories stored on the rear.

Truck to Robot Mode:

To convert the figure back to robot mode, reverse the steps outlined above.

Official Transformation Video:

5. Artikolazzjoni u Pożizzjoni

The Optimus Prime figure features multiple points of articulation for various action poses:

• Kap: Ball joint for full rotation and up/down movement.
• Armi: Full 360-degree rotation at the shoulders, bicep swivel, and elbow bend.
• qadd: Rotational movement at the waist.
• Saqajn: Forward, backward, and outward movement at the hips, knee bend, and ankle tilt.

Image: Optimus Prime in robot mode, showcasing its articulation with a dynamic pose.

6. Weapon Storage in Vehicle Mode

In truck mode, the included accessories can be stored on the figure:

• The two blasters can peg into the rear section of the truck.
• The Energon axe can also peg into the rear section alongside the blasters.

Additionally, this figure is compatible with some original G1 Optimus Prime trailers, allowing for expanded display options.

Image: Optimus Prime in truck mode, demonstrating weapon storage on the rear section.

7. Manutenzjoni

To maintain the quality and longevity of your Optimus Prime figure:

• Clean the figure with a soft, dry cloth. Avoid harsh chemicals or abrasive materials.
• Aħżen il-figura 'l bogħod mix-xemx diretta u minn temperaturi estremi biex tevita li titlef il-kulur jew titgħawweġ.
• Handle transformation steps gently to avoid stress on joints and plastic parts.

8 Issolvi l-problemi

If you encounter any issues with your figure:

• Tight Joints: If joints are too tight, gently work them back and forth. Applying a small amount of silicone shock oil (not petroleum-based lubricants) can help, but use sparingly.
• Ġonot Laxki: For loose joints, a thin layer of clear nail polish or a specialized joint tightener can be applied to the ball joint or peg, allowed to dry, and then reassembled.
• Diffikultajiet fit-Trasformazzjoni: Refer to the official transformation video or the included instructions for detailed visual guidance. Ensure all parts are aligned correctly before applying force.
• Fist Transformation: Some figures may have a very tight right fist that does not fully retract during transformation. Gentle manipulation or warming the plastic slightly may help, but proceed with caution to avoid damage.

9. Speċifikazzjonijiet

Image: Optimus Prime in truck mode, illustrating its physical dimensions.

10. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija jew appoġġ għall-prodott, jekk jogħġbok irreferi għall-indirizz uffiċjali tal-manifattur. webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta’ garanzija.