LEHMANN LGALM-2646

Manwal tal-Utent tal-Lawn Mower tal-Petrol Lehmann LGALM-2646

Model: LGALM-2646

1. Introduzzjoni

Thank you for choosing the Lehmann LGALM-2646 Gasoline Lawn Mower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new lawn mower. Please read this manual thoroughly before operating the machine and keep it for future reference.

1.1 Istruzzjonijiet tas-Sigurtà

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or death.

2. Prodott Aktarview

Familiarize yourself with the components of your Lehmann LGALM-2646 lawn mower.

Lehmann LGALM-2646 Gasoline Lawn Mower with grass bag, extra blades, and oil bottle

Figura 2.1: B'mod ġenerali view of the Lehmann LGALM-2646 Gasoline Lawn Mower, including the grass collection bag, two spare blades, and a bottle of engine oil.

Close-up of the Lehmann LGALM-2646 lawn mower handlebar with labeled controls

Figura 2.2: Dettaljat view of the handlebar controls. (1) Engine Stop Lever, (2) Drive Lever.

2.1 Komponenti Ewlenin

3. Setup

3.1 Assemblea

The lawn mower requires minimal assembly. Follow these steps:

  1. Ħoll il-komponenti kollha mill-kartuna.
  2. Attach the handlebar to the main unit using the provided bolts and knobs. Ensure the handle is securely locked in the operating position.
  3. Assemble the grass collection bag if it came disassembled.
  4. Mount the grass collection bag onto the rear of the mower.

3.2 Verifiki Inizjali

Before first use, perform the following checks:

4. Operazzjoni

4.1 Tibda tal-Magna

Follow these steps to start your lawn mower:

Hand pulling the recoil starter cord on the Lehmann LGALM-2646 lawn mower

Figure 4.1: Starting the engine by pulling the recoil starter cord.

  1. Ensure the lawn mower is on a flat, level surface.
  2. Press the primer bulb (if equipped) 3-5 times until fuel is visible.
  3. Hold the engine stop lever (1 in Figure 2.2) firmly against the handlebar. The engine will not start unless this lever is held.
  4. Pull the recoil starter cord with a swift, continuous motion until the engine starts. Do not let the cord snap back.
  5. Once the engine starts, release the recoil starter cord slowly.
  6. To engage the rear-wheel drive, hold the drive lever (2 in Figure 2.2) against the handlebar. Release it to disengage.

4.2 Ħsad

For best results, mow when the grass is dry. Overlap cutting swaths slightly to ensure even coverage.

Lehmann LGALM-2646 lawn mower operating on green grass

Figure 4.2: The lawn mower in operation on a lawn.

4.3 Aġġustament tal-Għoli tat-Tqattigħ

The Lehmann LGALM-2646 features a 7-stage central cutting height adjustment, ranging from 25 mm to 70 mm.

  1. Itfi l-magna u stenna li x-xafra tieqaf kompletament.
  2. Locate the cutting height adjustment lever, typically near one of the rear wheels.
  3. Pull the lever outwards and move it to the desired height setting. The settings are usually numbered or indicated by notches.
  4. Kun żgur li r-roti kollha huma ssettjati fl-istess għoli għal qtugħ uniformi.

5. Manutenzjoni

Regular maintenance ensures optimal performance and extends the life of your lawn mower. Always disconnect the spark plug cap before performing any maintenance.

5.1 Tindif

Clean the mower after each use, especially the cutting deck, to prevent grass buildup and corrosion.

Underside of the Lehmann LGALM-2646 lawn mower deck, highlighting the area to clean

Figure 5.1: Area under the cutting deck that requires regular cleaning to prevent grass buildup and maintain performance.

Image showing 'No Corrosion Warranty' on the Lehmann LGALM-2646 lawn mower

Figure 5.2: The robust steel housing is designed to resist corrosion, contributing to the mower's longevity.

5.2 Kura tax-Xafra

A sharp blade ensures a clean cut and healthy lawn. Inspect the blade regularly for sharpness and damage.

5.3 Ħażna

For long-term storage (over 30 days), prepare the mower as follows:

6 Issolvi l-problemi

Din it-taqsima tipprovdi soluzzjonijiet għal problemi komuni li tista’ tiltaqa’ magħhom.

ProblemaKawża PossibbliSoluzzjoni
Il-magna ma tibdaxNo fuel; Spark plug cap loose; Engine stop lever not held; Stale fuel; Clogged fuel filter; Faulty spark plug.Add fresh fuel; Connect spark plug cap securely; Hold engine stop lever; Drain and refill with fresh fuel; Clean/replace fuel filter; Replace spark plug.
Il-magna taħdem ħażin jew tieqafDirty air filter; Stale fuel; Clogged carburetor; Incorrect oil level.Clean/replace air filter; Drain and refill with fresh fuel; Clean carburetor (professional service recommended); Adjust oil level.
Qatgħa irregolariDull or bent blade; Wheels set to different heights; Uneven terrain.Sharpen or replace blade; Ensure all wheels are at the same cutting height; Mow on level ground where possible.
Vibrazzjoni eċċessivaBent or unbalanced blade; Loose blade bolt; Debris caught in blade area.Inspect and replace blade if bent; Tighten blade bolt; Clear debris from under the deck.

7. Speċifikazzjonijiet

Technical data for the Lehmann LGALM-2646 Gasoline Lawn Mower.

KaratteristikaDettall
Numru tal-MudellLGALM-2646
Spostament tal-Magna146 ċm³
Qawwa tal-Magna3.5 HP
Tip tas-sewqanRear-Wheel Drive (Gasoline-powered)
Wisa' tal-Qtugħ46 ċm
Aġġustament tal-Għoli tal-Qtugħ7-stage central adjustment
Firxa tal-Għoli tal-Qtugħ25 - 70 mm
Materjal tad-DjarRobust Steel
ManubrijuFunzjoni li jintwew
Piż tal-oġġett29 kg
Dimensjonijiet tal-Prodott (P x W x H)150 x 52 x 112 ċm
KulurIswed / Aħmar

8. Garanzija u Appoġġ

For warranty information or technical support, please contact Lehmann customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Lehmann websit jew ikkuntattja lin-negozjant lokali tiegħek.

Manifattur: Lehmann
Ditta: LEHMANN

Dokumenti Relatati - LGALM-2646

Preview Imwejjed Rotatorji CNC LEHMANN - Katalgu Prinċipali Edizzjoni 4 | Serje PGD, E, DD
Il-Katalgu Prinċipali ta' LEHMANN Edizzjoni 4 għal Imwejjed Rotatorji CNC. Esplora PGD, Serje E, Serje DD, u aktar. Soluzzjonijiet b'veloċità għolja u mingħajr backlash għal awtomazzjoni industrijali u manifattura ta' preċiżjoni.
Preview Aġġornament tal-Firmware Lehmann: Istruzzjonijiet Operattivi għal Serraturi u Qarrejja RFID
Dan id-dokument jipprovdi struzzjonijiet operattivi għas-softwer LEHMANN Firmware Updater, li jiddeskrivi fid-dettall kif taġġorna l-firmware fuq serraturi Lehmann, qarrejja RFID, u terminals. Jinkludi r-rekwiżiti tas-sistema, prodotti kompatibbli, u gwida pass pass.
Preview Gwida għall-Utent tas-Softwer tal-Ġestjoni LEHMANN: Konfigurazzjoni u Tħaddim
Gwida komprensiva għall-utent għas-Softwer ta' Ġestjoni LEHMANN (LMS), li tiddeskrivi l-konfigurazzjoni, it-tħaddim, u l-ġestjoni tas-sistemi RFID LEHMANN kemm fil-modi offline kif ukoll online. Tkopri l-ġestjoni tat-transponder u s-serraturi, is-settings tal-utent, u l-amministrazzjoni tas-sistema.
Preview LEHMANN GIRO TA Elektronisches Tastaturschloss mit P2/P4 Adapter - Bedienungsanleitung
Umfassende Bedienungsanleitung für das LEHMANN GIRO TA elektronische Tastaturschloss mit P2/P4 Adapter. Enthält Informationen zur Installation, Bedienung, Sicherheit, Wartung, Konfiguration und Fehlerbehebung.
Preview LEHMANN Kontrollur Primarju u Sekondarju Bedienungsanleitung
Diese Bedienungsanleitung beschreibt die Installazzjoni, Konfigurazzjoni u Wartung der LEHMANN Kontrollur Primarju u Sekondarju für das Captos und Captos iCharge RFID-Schließsystem.
Preview Istruzzjonijiet għall-Operazzjoni tas-Serratura Elettronika tal-Locker LEHMANN M610 LEGIC L043-A03
Istruzzjonijiet komprensivi dwar l-operat għas-serratura elettronika tal-locker LEHMANN M610 LEGIC L043-A03, li jkopru l-installazzjoni, il-programmazzjoni, l-operat, il-manutenzjoni u s-soluzzjoni tal-problemi.