PAL 120W Multi Color Dual Zone Remote Control Transformer Instruction Manual

1. Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120). This device is engineered to power and control multi-color LED lighting systems, offering advanced dual-zone functionality for versatile and dynamic lighting solutions in various applications.

2. Informazzjoni dwar is-Sigurtà

WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the product or property.

• Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on the transformer or connected lighting.
• L-installazzjoni għandha titwettaq minn elettriċista kwalifikat u skont il-kodiċijiet elettriċi lokali u nazzjonali kollha.
• Do not operate the transformer if it has been damaged in any way.
• Ensure the transformer is installed in a location that is protected from direct water exposure, although the unit is rated IP65 for dust and water jet protection.
• Ivverifika li l-provvista voltage matches the transformer's specified input voltage (100-240V AC, 50/60Hz).
• Do not exceed the maximum output power of 120 Watts.

3. Kontenut tal-Pakkett

Please verify that all items listed below are present and undamaged in your package:

• 1 x PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120)
• 1 x PAL PCZ-2 Color Touch 2 Zone Remote Control
• 2 x Batteriji AAA (għall-kontroll remot)

Image: The PAL 120W Multi Color Dual Zone Remote Control Transformer, its accompanying PCZ-2 remote control, and two AAA batteries. The transformer is a dark grey rectangular unit with connection ports on one side, and the remote is shown in its packaging next to it.

4. Prodott Aktarview

4.1. Transformer Unit (64-PCR-3D-120)

The main transformer unit is a robust, weather-resistant enclosure designed for outdoor or indoor installation. It converts standard AC line voltage to 24V DC, suitable for PAL LED lighting products. Key features include:

• Input Voltage: 100-240V AC, 50/60Hz
• Qawwa tal-Provvista: 125 Watts
• Qawwa tal-Ħruġ: 120 Watts (24V DC)
• Klassifikazzjoni tal-IP: IP65 (Protett kontra t-trab u l-ġettijiet tal-ilma)
• Ċertifikazzjonijiet: CE, SELV

4.2. PCZ-2 Color Touch 2 Zone Remote Control

The PCZ-2 remote control allows for intuitive management of your connected LED lighting. It features a color touch wheel for precise color selection and dedicated buttons for controlling two independent lighting zones, brightness, and various lighting modes.

5. Setup u Installazzjoni

Before beginning installation, ensure all power is disconnected at the main circuit breaker.

1. Immuntar: Select a suitable, secure location for the transformer. Mount the unit vertically using appropriate fasteners, ensuring adequate ventilation around the enclosure.
2. Wiring tad-Dħul: Connect the AC input power (100-240V AC) to the designated input terminals on the transformer. Ensure proper polarity (Live, Neutral, Ground) as indicated on the unit. Use appropriate gauge wiring for the power requirements.
3. Wajer tal-Output: Connect your 24V DC PAL LED lighting fixtures to the output terminals. The transformer supports two independent zones. Ensure correct polarity (+ and -) for each lighting fixture. Refer to your lighting fixture's manual for specific wiring diagrams.
4. Batteriji tal-Kontroll mill-bogħod: Open the battery compartment on the PCZ-2 remote control and insert the two AAA batteries, observing the correct polarity.
5. Qawwa Mixgħul: Ladarba l-konnessjonijiet kollha jkunu siguri u vverifikati, erġa' daħħal l-enerġija fis-circuit breaker.

6. Istruzzjonijiet Operattivi

6.1. Tqabbil tal-Kontroll mill-bogħod

The PCZ-2 remote control should be pre-paired with the transformer. If pairing is lost or a new remote is introduced:

1. Ensure the transformer is powered on.
2. Within 5 seconds of powering on the transformer, press and hold the 'Zone 1 ON' button on the remote control for approximately 3 seconds. The connected lights should flash to confirm successful pairing.
3. Repeat for 'Zone 2 ON' button if you wish to pair the second zone.

6.2. Basic Remote Functions

• Qawwa ON/OFF: Press the 'ON' or 'OFF' buttons for each zone to toggle power.
• Għażla tal-Kulur: Use the color touch wheel to select desired static colors.
• Kontroll tal-luminożità: Use the brightness up/down buttons to adjust the intensity of the selected color or mode.
• Għażla tal-Modalità: Cycle through pre-programmed lighting modes (e.g., color changing, fading) using the 'Mode' button.
• Kontroll taż-Żona: Independently control Zone 1 and Zone 2 using their respective buttons.

7. Manutenzjoni

• Tindif: Periodically clean the exterior of the transformer and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Spezzjoni: Regularly inspect wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
• Sostituzzjoni tal-batterija: Replace the AAA batteries in the remote control when its performance degrades or it stops responding.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official PAL Lighting website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PAL Lighting customer service directly. Contact information can typically be found on the manufacturer's webis-sit jew l-imballaġġ tal-prodott.