Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your ARES WING Desk Monitor Mount (Model GDT1003LWH). Please read this manual thoroughly before installation and use to ensure proper function and safety. This monitor mount is designed to support a single monitor, compatible with screens ranging from 17 to 49 inches and weighing between 4.4 to 44 lbs.
Informazzjoni dwar is-Sigurtà
- Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-assemblaġġ. Tużax jekk xi partijiet huma neqsin jew difettużi.
- Verify that your monitor's weight and size are within the specified limits (4.4-44 lbs, 17-49 inches). Exceeding these limits can result in instability and damage.
- Confirm your monitor has compatible VESA mounting holes (75x75mm or 100x100mm). If not, a separate VESA adapter is required.
- Ensure your desk thickness is compatible with the chosen mounting method (C-clamp: 0.39-3.34 inches; Grommet: 0.39-1.8 inches).
- Adjust the gas spring tension according to your monitor's weight qabel attaching the monitor to prevent sudden drops or difficulty in adjustment.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod waqt l-installazzjoni.
- Tissikkax iżżejjed il-viti, għax dan jista' jikkawża ħsara.
- For any issues or concerns, contact ARES WING customer support.
Kontenut tal-Pakkett
Please check the package to ensure all the following components are included:
- Assemblea tad-Driegħ tal-Monitor
- Desk Clamp (C-clamp)
- Grommet Mount Base
- Pjanċa VESA
- Kit tal-Ħardwer (viti, woxers, spacers)
- Allen Wrenches
- Manwal għall-Utent (dan id-dokument)
Setup u Installazzjoni
1. Iċċekkja l-Kompatibbiltà tal-Monitor
Before proceeding, ensure your monitor meets the following criteria:
- Mudell VESA: 75x75mm or 100x100mm.
- Daqs tal-iskrin: 17" to 49".
- Kapaċità tal-piż: 4.4 lbs to 44 lbs.
Figure 1: Monitor and Desktop Compatibility Check
For monitors without VESA holes, a separate VESA adapter is required. Some Samsung G9 monitors may come with a VESA adapter; please check your monitor's documentation.
Figure 2: VESA Hole Check and Adapter Preparation
2. Choose Mounting Method
The ARES WING monitor mount supports two installation methods: C-clamp and Grommet mount.
- C-Clamp: Suitable for desk thickness between 0.39 inches (10mm) and 3.34 inches (85mm).
- Immuntar tal-Grommet: Suitable for desk thickness between 0.39 inches (10mm) and 1.8 inches (45mm). Requires an existing hole in your desk.
3. Install the Desk Mount
Follow the instructions provided with your mount to securely attach the base to your desk using either the C-clamp or grommet method. Ensure the mount is stable before proceeding.
4. Aġġusta t-Tensjoni tar-Rebbiegħa tal-Gass
It is crucial to adjust the gas spring tension to match your monitor's weight qabel attaching the monitor. This prevents the arm from springing up or sagging.
- Use the provided Allen wrench to adjust the tension screw on the arm.
- Dawwar lejn il-lemin for heavier monitors (to increase tension).
- Dawwar lejn l-arloġġ for lighter monitors (to decrease tension).
- Adjust until the arm can hold its position freely when moved without a monitor attached.
Figure 3: Gas Spring Tension Adjustment
5. Attach Monitor to VESA Plate
Secure the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
6. Mount Monitor to Arm
Carefully slide the VESA plate with the attached monitor onto the monitor arm's VESA head. Ensure it clicks into place or is secured with any locking mechanism provided.
Figure 4: Monitor Mounted on ARES WING Arm
Istruzzjonijiet Operattivi
1. Aġġustament tal-Pożizzjoni tal-Monitor
The ARES WING monitor arm offers full motion capabilities for optimal ergonomic positioning:
- Aġġustament Għoli: The arm allows vertical movement to raise or lower your monitor to the desired eye level. The height can be adjusted from 8.5 inches to 19.7 inches.
- Mejjel: Tilt your monitor +50° upwards or -20° downwards to reduce glare and find the perfect viewangolu tal-ing.
- Dawwar: Swivel the monitor ±90° left or right to share your screen or adjust for different tasks.
- Rotazzjoni: Dawwar il-monitor 360° biex taqleb bejn l-orjentazzjonijiet orizzontali u vertikali.
Figure 5: Full Motion Adjustment Capabilities
Figure 6: Tilting Ultrawide Monitors
2. Kontroll tad-Dawl RGB
The monitor arm features integrated RGB lighting with 20 dynamic lighting effects. To control the lighting:
- Connect the USB cable from the monitor arm to a USB port on your computer or a USB power adapter.
- Locate the light control button on the base of the monitor arm.
- Agħfas u żomm the button for approximately 2-3 seconds to turn the RGB lighting ON or OFF.
- Agħfas fil-qosor to cycle through the 20 different lighting modes (Color Cycle, Chasing, Static, Wave, etc.).
- The lighting will remember the last mode used when turned back on.
Figure 7: RGB Lighting Control
3. Ġestjoni tal-Kejbil
Utilize the integrated cable management channels on the arm to route your monitor and power cables. This helps maintain a clean and organized workspace.
Manutenzjoni
- Tindif: Imsaħ id-driegħ tal-monitor b'ċarruta ratba uamp drapp. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
- Kontrolli perjodiċi: Iċċekkja l-viti u l-konnessjonijiet kollha perjodikament biex tiżgura li jibqgħu ssikkati u siguri. Erġa' ssikka jekk meħtieġ.
- Rebbiegħa tal-Gass: The internal gas spring is designed for long-term durability (fatigue tested 20,000+ times). No specific maintenance is required for the gas spring itself, but ensure its tension is correctly set for your monitor's weight.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Monitor arm sags or won't stay up. | It-tensjoni tal-molla tal-gass hija baxxa wisq għall-piż tal-monitor. | Increase gas spring tension by turning the adjustment screw counter-clockwise. Refer to "Adjust Gas Spring Tension" section. |
| Monitor arm is too stiff or won't move down. | It-tensjoni tal-molla tal-gass hija għolja wisq għall-piż tal-monitor. | Decrease gas spring tension by turning the adjustment screw clockwise. Refer to "Adjust Gas Spring Tension" section. |
| RGB lighting does not turn on. | USB cable not connected or button not pressed correctly. | Ensure USB cable is securely connected. Press and żomm the light control button for 2-3 seconds to activate. |
| Monitor wobbles or is unstable. | Il-muntatura mhux imwaħħla sew mal-iskrivanija jew il-pjanċa VESA mhux issikkata. | Check desk clamp/grommet mount for tightness. Ensure VESA plate screws are securely fastened to the monitor and the plate is properly seated on the arm. |
| Monitor cannot tilt smoothly. | Tilt mechanism screw is too tight. | Loosen the tilt adjustment screw slightly until smooth tilting is achieved. Refer to Figure 6. |
Speċifikazzjonijiet
| Numru tal-Mudell | GDT1003LWH |
| Materjal | Aluminju, Ħadid |
| Kompatibilità VESA | 75x75mm, 100x100mm |
| Kompatibbiltà tad-Daqs tal-Iskrin | 17 - 49 inches (flat and curved monitors) |
| Kapaċità tal-piż | 4.4 - 44 libbra (2 - 20 kg) |
| Medda ta 'Aġġustament Għoli | 8.5 - 19.7 pulzieri |
| Angolu Mejjel | +50° / -20° |
| Angolu li jdur | ± 90° |
| Rotazzjoni | 360° |
| Desktop Thickness (C-Clamp) | 0.39 - 3.34 pulzieri (10 - 85 mm) |
| Desktop Thickness (Grommet) | 0.39 - 1.8 pulzieri (10 - 45 mm) |
| Dawl RGB | 20 dynamic lighting effects |
Garanzija u Appoġġ
ARES WING provides a Garanzija tal-Manifattur ta' sena for this product. For any questions, technical assistance, or warranty claims, please contact ARES WING customer support through the retailer where you purchased the product or visit the official ARES WING websit għal informazzjoni ta' kuntatt.
Għal aktar informazzjoni u appoġġ, tista' żżur il- ARES WING Store on Amazon.
