1. Introduzzjoni
The ThermoPro TP60-3 is a digital wireless indoor/outdoor thermometer and hygrometer designed to monitor temperature and humidity levels in various environments. This device provides accurate readings for both indoor and outdoor conditions, featuring a long wireless range and the ability to connect with multiple remote sensors. It is suitable for use in homes, baby rooms, nurseries, cellars, basements, warehouses, and greenhouses to ensure optimal environmental control.
Image: The ThermoPro TP60-3 main display unit and three remote wireless sensors, illustrating the complete product package.
2. X'hemm fil-Kaxxa
- 1 x Unità tar-Riċevitur Prinċipali
- 3 x Remote Transmitter Sensors
- 8 x Batteriji AAA
3. Prodott Aktarview
3.1 Main Receiver Unit
The main receiver unit features a large, easy-to-read LCD screen that displays indoor and outdoor temperature and humidity percentages. It also shows temperature and humidity trend indicator arrows, and daily high/low information. The unit is designed for tabletop placement with a built-in stand or can be wall-mounted.
Image: Close-up of the main display unit showing outdoor temperature and humidity, channel indicator, and indoor temperature and humidity with trend arrows.
3.2 Remote Transmitter Sensors
The remote sensors transmit temperature and humidity data wirelessly to the main unit. Each sensor is designed for outdoor use and should be placed in a location protected from direct sunlight and rain. The system supports up to three remote sensors, allowing monitoring of different locations simultaneously.
Image: Diagram showing the main unit receiving data from three remote sensors placed in a bedroom, storage room, and garden, highlighting multi-location monitoring.
4. Setup
4.1 Installazzjoni tal-batterija
- Open the battery compartment on the back of both the main receiver unit and each remote sensor.
- Insert the provided AAA Batteries, ensuring correct polarity (+/-).
- Agħlaq il-kompartimenti tal-batterija sew.
4.2 Synchronization Process
After installing batteries, the main unit and remote sensors should automatically synchronize. The RF signal icon on the upper left of the main unit's display will flash during synchronization. If connection is lost or batteries are replaced, follow these steps:
- Ensure batteries are correctly installed in both units.
- Press the TX button on the remote sensor(s) to re-establish connection.
4.3 Linji Gwida dwar il-Pjazzament
- Unità Prinċipali: Place the main unit indoors on a tabletop using its built-in stand or mount it on a wall.
- Sensuri mill-bogħod:
- Place sensors in an open area, avoiding wall obstructions.
- Keep sensors away from routers and other electronic devices to prevent high-frequency signal interference.
- Avoid direct sunlight exposure, as this can lead to inaccurate temperature readings.
- Always place sensors upright to prevent rain from entering through vent holes.
- The wireless range is up to 500ft/150m in open areas.
Image: The main unit shown on a tabletop and a remote sensor mounted on an exterior wall, demonstrating flexible placement options.
5. Istruzzjonijiet Operattivi
5.1 Karatteristiċi tal-Wiri
- Temperatura u Umdità ta' Barra: Murija fil-parti ta' fuq tal-iskrin.
- Indikatur tal-Kanal: Shows which remote sensor's data is currently displayed (CH1, CH2, CH3).
- Temperatura u Umdità ta' ġewwa: Displayed at the bottom of the screen.
- Vleġeġ tax-Xejra: Indicate whether temperature and humidity are rising, falling, or remaining stable.
- Rekords MAX/MIN: Shows the highest and lowest temperature and humidity readings recorded over the last 24 hours or all-time since the last reset.
5.2 Unit Selection (°F/°C)
To switch between Fahrenheit (°F) and Celsius (°C), press the °F/°C button located on the back of the main receiver unit.
5.3 ViewRekords MAX/MIN
Press the MAX/MIN button on the back of the main unit to cycle through the 24-hour and all-time high and low records for temperature and humidity. To clear the records, press and hold the CLEAR button.
5.4 Għażla tal-Kanal
If using multiple remote sensors, press the CHANNEL button on the back of the main unit to switch between the different sensor channels (CH1, CH2, CH3) and view their respective outdoor readings.
6. Manutenzjoni
- Tindif: Imsaħ nadif b'artab, damp drapp. Tgħaddasx fl-ilma.
- Sostituzzjoni tal-batterija: Replace batteries when the low battery indicator appears on the display. Ensure correct polarity.
- Ħażna: Jekk taħżen l-apparat għal perjodu estiż, neħħi l-batteriji biex tevita t-tnixxija.
7 Issolvi l-problemi
- Ebda Wiri/Batterija Baxxa: Iċċekkja l-installazzjoni tal-batterija u ibdel jekk meħtieġ.
- L-ebda Qari tas-Sensor Remot:
- Ensure remote sensor is within range (500ft/150m).
- Press the TX button on the remote sensor to re-sync.
- Iċċekkja għal interferenza minn apparat elettroniku ieħor.
- Replace remote sensor batteries.
- Qari mhux eżatt:
- Ensure remote sensor is not in direct sunlight or exposed to rain.
- Verify proper placement away from heat sources or vents.
8. Speċifikazzjonijiet
| Brand | ThermoPro |
| Isem tal-Mudell | TP60S |
| Medda ta 'Temperatura ta' ġewwa | -4°F sa 158°F (-20°C sa 70°C) |
| Firxa ta 'Temperatura ta' Barra | -4°F sa 158°F (-20°C sa 70°C) |
| Medda ta 'Umdità | 10% sa 99% |
| Firxa Wireless | Up to 500ft/150m (in open area) |
| Teknoloġija tal-Konnettività | Radio Frequency (RF) - ASK 433Mhz |
| Sors tal-Enerġija | Imħaddem bil-batterija (AAA) |
| Tip ta 'Wiri | LCD diġitali |
| Materjal | Plastik |
9. Garanzija u Appoġġ
For warranty information, technical support, or further assistance, please visit the official ThermoPro webis-sit jew ikkuntattja s-servizz tal-konsumatur tagħhom. Id-dettalji tipikament jistgħu jinstabu fl-imballaġġ tal-prodott jew fuq il-manuskritt tal-manifattur websit.
Tista 'żżur il- ThermoPro Store għal aktar prodotti u informazzjoni.
