Introduzzjoni
This manual provides essential information for the proper use and maintenance of your SMALLRIG Magnetic Mount 4466. Please read these instructions carefully before using the product to ensure optimal performance and safety.
X'hemm fil-Kaxxa
The package for your Magnetic Mount 4466 includes the following components:
- Magnetic Suction Cup × 1
- Driegħ Maġiku × 1
- Muntatura tal-Kamera tal-Azzjoni × 1
Karatteristiċi Ewlenin
The SMALLRIG Magnetic Mount 4466 offers several key features designed for versatility and secure camera mounting:
- Suction Cup & Magnet 2-in-1: Combines powerful magnets with a suction cup base for enhanced security, capable of withstanding a vertical pull of up to 28kg.
- Materjali ta' kwalità għolja: Constructed from lightweight and durable aluminum alloy with a soft silicone base to protect surfaces.
- Aġġustament flessibbli: Features a 360° metal double-ball head magic arm for precise angle adjustments.
- Kompatibilità Wiesgħa: Equipped with a 1/4"-20 interface and an adapter mount, compatible with various action cameras including GoPro Hero series, Insta360 X series, and DJI Osmo Action cameras.
Setup u Installazzjoni
Follow these steps to set up your Magnetic Mount 4466:
- Arma l-Muntanja: Attach the magic arm to the magnetic suction cup base. Ensure it is securely tightened.
- Attach Camera Mount: Connect the action camera mount to the other end of the magic arm.
- Secure Your Camera: Mount your action camera onto the action camera mount.
- Preparazzjoni tal-wiċċ: Ensure the target surface is clean, dry, and free of debris for optimal adhesion.
- Apply Mount: Press the magnetic suction cup firmly onto a suitable flat iron or magnetic surface.
Istruzzjonijiet Operattivi
The 360° metal double-ball head magic arm allows for versatile positioning of your camera. To adjust the angle:
- Loosen the central knob on the magic arm to free the ball heads.
- Adjust your camera to the desired angle and orientation.
- Tighten the central knob firmly to lock the camera in place.
Kompatibilità
The SMALLRIG Magnetic Mount 4466 is designed to be widely compatible with various action cameras and devices:
- GoPro Hero 12/11/10/9/8/7/6/5
- Insta360 X3, ONE RS/X
- DJI Osmo Action 3/4 camera
- AKASO and similar action cameras
Xenarji ta' Użu Multipli
The versatile design of the Magnetic Mount 4466 allows for use in a variety of environments and applications:
- Vetturi: Ideal for mounting on car doors, roofs, or hoods for dynamic driving footage.
- Motorcycles: Securely attach to metal surfaces for unique riding perspectives.
- Dgħajjes: Capture marine adventures from various angles on metal boat surfaces.
- Gyms: Mount on gym equipment for workout tracking or instructional videos.
- Iron Railings: Attach to railings for stable, elevated shots.
Important Notes & Safety
Please observe the following guidelines for safe and effective use:
- Tip tal-wiċċ: Only use on flat iron surfaces or other magnetic flat surfaces. For pure glass surfaces, use SMALLRIG mounts 3566 or 4193.
- Prohibited Surfaces: Do not use on car windows, car windshields, carbon fiber, special alloy metal, frosted glass, rough or textured surfaces, marble, wooden panels, or other non-magnetic uneven surfaces.
- Il-ġarr tat-tagħbija: Recommended for load bearing up to 0.35kg (for small cameras).
- Limitu tal-Veloċità: Recommended for a maximum speed of no more than 120km/h (74mph).
- Ħabel tas-Sigurtà: It is highly recommended to use your own safety rope, especially in high-speed or dynamic environments. Check the suction force before and every hour of use.
- Kundizzjonijiet Ambjentali: Do not use in prolonged contact with water or rain. Avoid high-impact sports.
- Firxa tat-Temperatura: Applicable temperature range: -20°C to 60°C (-4°F to 140°F).
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Dimensjonijiet tal-Prodott | 5.31 x 2.95 x 2.95 inches (75.0 × 75.0 × 134.5mm) |
| Piż tal-oġġett | 9.1 ounces (196.0 ± 5.0g) |
| Numru tal-Mudell tal-Oġġett | 4466 |
| Materjal(i) | Silicone, Aluminum Alloy, ABS |
| Tip ta 'Immuntar | Magnetic and Vacuum Suction Cup |
| Karatteristika Speċjali | Aġġustabbli |
| Kulur | Iswed |
Issolvi l-problemi
- Mount Not Sticking: Ensure the surface is clean, dry, flat, and magnetic. Avoid porous or textured surfaces.
- Camera Movement: Tighten all knobs on the magic arm securely. Reduce speed or use a safety tether in high-vibration environments.
- Difficulty Removing: Gently lift the release tabs on the suction cup to break the vacuum seal.
Garanzija u Appoġġ
SMALLRIG products are designed for durability and performance. For warranty information, technical support, or service inquiries, please refer to the official SMALLRIG webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.
