1. Prodott Aktarview
The MHPRO 21V Cordless Drill Set is a versatile power tool designed for various DIY and professional tasks. It features a powerful motor, long-lasting lithium-ion batteries, and multiple operating modes to handle drilling, screwing, and hammer drilling applications across different materials.
Figure 1.1: MHPRO 21V Cordless Drill Set and included accessories.
2. Istruzzjonijiet tas-Sigurtà
Dejjem osserva l-prekawzjonijiet bażiċi ta' sigurtà meta tuża għodda elettrika biex tnaqqas ir-riskju ta' nar, xokk elettriku, u korriment personali.
- Sigurtà taż-Żona tax-Xogħol: Żomm iż-żona tax-xogħol tiegħek nadifa u mdawwla sew. Żoni imbarazzati jew mudlama jistiednu inċidenti. Tħaddimx għodod tal-enerġija f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
- Sigurtà Elettrika: Evita kuntatt tal-ġisem ma' uċuħ ertjati jew ertjati (eż., pajpijiet, radjaturi, fuklari, refriġeraturi). Tesponix għodod tal-elettriku għax-xita jew għal kundizzjonijiet imxarrbin.
- Sigurtà Personali: Always wear eye protection and appropriate safety gear. Use hearing protection when operating the drill for extended periods. Dress properly; avoid loose clothing or jewelry.
- Użu u Kura tal-Għodda: Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek. Skonnettja l-pakkett tal-batterija mill-għodda tal-enerġija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda tal-enerġija.
- Użu u Kura tal-Pakkett tal-Batterija: Recharge only with the charger specified by the manufacturer. Do not disassemble the battery pack. Do not short-circuit the battery pack.
3. Kontenut tal-Pakkett
Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:
- 1 x Cordless Drill
- 2 x 2.0Ah Li-ion Batteries
- 1 x Charger
- 1 x Kawża tal-Ġarr
- 1 x Manwal għall-Utent
- 5 x Brad Point Drill Bits (Ø5/6/10/12/14mm)
- 2 x Twist Drill Bits (Ø5/6mm)
- 2 x Impact Drill Bits (Ø5/6mm)
- 3 x 5cm Screwdriver Bits (Ø6.3mm)
- 1 x Flexible Drill Shaft
- 1 x Hex Screwdriver Holder
- 1 x Clip taċ-ċinturin
Figure 3.1: Visual representation of all components included in the MHPRO Cordless Drill Set package.
4. Karatteristiċi tal-prodott
4.1. 3-in-1 System & Torque Control
The MHPRO cordless drill driver offers three distinct working modes: screwing, drilling, and hammer drilling. With a maximum torque of 42N.m and 25+3 torque positions, it provides precise control for various materials including wood, metal, plastic, and masonry.
Figure 4.1.1: Mode selector for screwing, drilling, and hammer drilling functions.
Figure 4.1.2: The drill's capability to easily penetrate various materials.
4.2. Dual 2.0Ah Li-ion Batteries & Indicator
Equipped with two 2.0Ah large capacity Li-ion batteries, ensuring extended operation time. Each battery fully charges in approximately 90 minutes. A built-in power indicator light displays the current battery status.
Figure 4.2.1: The drill set includes two batteries and a fast charger.
4.3. 2-Speed Gearbox & Chuck
The drill features two speed ranges: 0-550 RPM for screw driving and 0-1850 RPM for drilling, allowing optimal performance for different tasks. The 3/8" (10mm) auto-lock chuck facilitates quick and easy bit changes.
Figure 4.3.1: Illustration of the two-speed gearbox for varied applications.
4.4. Ergonomic Design & LED Light
Designed with a shock absorber and soft rubber over-mold handle for maximum user comfort and reduced vibration. A built-in LED light illuminates the work area, improving visibility in dark environments. The lightweight design and included belt clip enhance portability and ease of use.
Figure 4.4.1: The integrated LED light provides illumination for working in low-light conditions.
Figure 4.4.2: The compact and lightweight design allows for use in confined areas.
5. Setup
5.1. Iċċarġjar tal-batterija
- Qabbad il-ċarġer ma' sokit standard tal-enerġija.
- Daħħal il-pakkett tal-batterija fil-ċarġer. Kun żgur li tikklikkja f'postu.
- The charging indicator light on the battery or charger will show the charging status. A full charge typically takes 90 minutes.
- Ladarba tkun iċċarġjata kompletament, neħħi l-batterija mill-ċarġer.
5.2. Installazzjoni/Tneħħija tal-Batterija
- Biex Tinstalla: Align the battery pack with the slot in the base of the drill handle. Slide the battery into the handle until it locks securely into place with a click.
- Biex tneħħi: Press the battery release button (usually located on the front or sides of the battery pack) and slide the battery out of the handle.
5.3. Installazzjoni/Tneħħija tal-Bits tat-Tħaffir
- Biex Tinstalla: Rotate the chuck counter-clockwise to open the jaws. Insert the desired drill bit or screwdriver bit into the chuck. Rotate the chuck clockwise to tighten the jaws securely around the bit. Ensure the bit is centered and firmly held.
- Biex tneħħi: Dawwar iċ-chuck kontra l-arloġġ biex ittaffi x-xedaq u iġbed il-bit 'il barra.
6. Operazzjoni
6.1. Għażla tal-Modalità Operattiva
Rotate the mode selector ring, located behind the chuck, to choose one of the three modes:
- Screwing Mode (Ikona tal-kamin): For driving or removing screws.
- Modalità tat-Tħaffir (Drill bit icon): For drilling holes in wood, metal, and plastic.
- Hammer Drilling Mode (Ikona tal-martell): Għat-tħaffir fil-ġebel u l-konkrit.
6.2. Aġġustament tas-Settings tat-Torque
In screwing mode, rotate the torque adjustment ring (numbered 1-25) to select the desired torque level. Lower numbers are for smaller screws or softer materials, higher numbers for larger screws or harder materials. The "Drill" setting bypasses the clutch for maximum torque in drilling applications.
6.3. L-Għażla tal-Veloċità
Use the speed selector switch on top of the drill to choose between two speed ranges:
- Veloċità Baxxa (0-550 RPM): Ideal for screw driving and applications requiring high torque.
- Veloċità Għolja (0-1850 RPM): Suitable for drilling and applications requiring faster rotation.
6.4. Rotazzjoni 'l Quddiem/Lura
The forward/reverse button, located above the trigger, controls the direction of rotation. Push it to the left for forward (clockwise) rotation and to the right for reverse (counter-clockwise) rotation. Center position locks the trigger for safety.
6.5. Operating the Trigger and LED Light
Squeeze the variable speed trigger to start the drill. The speed increases as you press the trigger further. The built-in LED light automatically illuminates the work area when the trigger is pressed.
Figure 6.5.1: Key operational controls of the MHPRO Cordless Drill.
7. Manutenzjoni
- Tindif: Regularly clean the ventilation slots of the drill to prevent overheating. Use a soft, damp drapp biex timsaħ il-barra. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Kura tal-batterija: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Charge them periodically if not in use.
- Manutenzjoni tal-Bits: Keep drill bits clean and sharp for optimal performance. Replace worn or damaged bits promptly.
- Ħażna: When not in use, store the drill and its accessories in the provided carry case, in a dry, secure location out of reach of children.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-trapan ma jibdax. | Battery not charged or not properly installed. Trigger lock engaged. | Charge battery fully and ensure it is securely installed. Disengage the forward/reverse switch from the center (locked) position. |
| Telf ta' enerġija waqt it-tħaddim. | Il-ċarġ tal-batterija huwa baxx. Il-protezzjoni kontra tagħbija żejda hija attivata. | Recharge the battery. Reduce pressure on the drill or use a sharper bit. Allow the tool to cool down if it feels hot. |
| Bit wobbles or falls out. | Mandrin mhux issikkat biżżejjed. Ix-xkub tal-bit huwa maħmuġ jew bil-ħsara. | Ensure the chuck is tightened firmly. Clean the bit shank or replace the bit if damaged. |
| Drill overheats. | Użu kontinwu u tqil. Slottijiet tal-ventilazzjoni mblukkati. | Allow the drill to cool down. Clean any debris from the ventilation slots. Avoid prolonged heavy-duty use. |
9. Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Numru tal-Mudell | MLUK-DZL00030 |
| Voltage | 21 Volts |
| Kapaċità tal-batterija | 2000 mAh (2.0Ah) |
| Tip ta 'batterija | Jonju tal-litju |
| Max Torque | 42 Nm |
| Settings tat-torque | 25 + 3 (Drill, Screw, Hammer) |
| Veloċità Mingħajr Tagħbija (Baxxa) | 0-550 RPM |
| Veloċità Mingħajr Tagħbija (Għolja) | 0-1850 RPM |
| Daqs Chuck | 3/8" (10mm) Keyless Chuck |
| Dimensjonijiet tal-Prodott | 29 x 27 x 12.5 ċm |
| Piż tal-oġġett | 1.3 kg |
| Sors tal-Enerġija | Mħaddma bil-batterija |
| Karatteristiċi Speċjali | Reverse Rotation, Variable Speed, Cordless, Rechargeable, Keyless Chuck, LED Light |
10. Garanzija u Appoġġ
MHPRO provides a Servizz ta' wara l-bejgħ ta' 24 xahar for this product. If you encounter any issues or have questions regarding your MHPRO Cordless Drill Set, please do not hesitate to contact our customer support. Please refer to your purchase documentation for specific contact details or visit the official MHPRO websit għal informazzjoni ta' appoġġ.
Figure 10.1: MHPRO customer support is available to assist with product inquiries.
