1. Introduzzjoni
This instruction manual provides essential information for the proper use and maintenance of your SW-Motech Motorcycle Rain Cover, designed specifically for the Jetpack Rear Bag (3-6L). This rain cover ensures your belongings remain dry and protected during adverse weather conditions.
2. Prodott Aktarview
The SW-Motech Rain Cover is a durable accessory crafted to provide an additional layer of protection for your Jetpack Rear Bag. It is made from robust, water-resistant material to shield against rain and moisture.

Figure 1: The SW-Motech Jetpack Rear Bag, for which this rain cover is designed.

Figure 2: The Jetpack Rear Bag shown mounted on a motorcycle. The rain cover fits over this bag.

Figura 3: Proġett tal-ġenbfile of the Jetpack Rear Bag, illustrating its compact design.
3. Installazzjoni
To install the rain cover:
- Ensure your Jetpack Rear Bag is securely mounted to your motorcycle.
- Unfold the rain cover completely.
- Carefully place the rain cover over the Jetpack Rear Bag, starting from the top.
- Adjust the cover to ensure it fully encloses the bag, covering all exposed surfaces. The elasticized edges or drawstrings (if present) should be snug around the base of the bag to prevent water ingress.
- Verify that the cover does not obstruct any critical motorcycle components or visibility.
4. Użu
The rain cover is designed for use during wet weather conditions to protect the contents of your Jetpack Rear Bag from rain, road spray, and dirt. It should be applied before riding in anticipated wet conditions.
5. Kura u Manutenzjoni
Proper care will extend the life of your rain cover:
- Tindif: Wipe the rain cover clean with a damp drapp u sapun ħafif. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Tnixxif: Allow the cover to air dry completely before folding and storing. Do not machine wash or tumble dry.
- Ħażna: Store the dry rain cover in a cool, dry place away from direct sunlight when not in use.
- Spezzjoni: Periodically inspect the cover for any tears, punctures, or signs of wear that could compromise its waterproof integrity.
6 Issolvi l-problemi
If you experience issues with water penetration:
- Iċċekkja Fit: Ensure the rain cover is properly fitted and snug around the entire Jetpack Rear Bag, leaving no gaps.
- Spezzjona għal Ħsara: Examine the cover for any visible damage such as holes or tears. Small repairs may be possible with appropriate waterproof repair kits.
- Verify Bag Closure: Ensure the Jetpack Rear Bag itself is properly closed and sealed before applying the rain cover.
7. Speċifikazzjonijiet
- Materjal: 210D polyamide
- Wiċċ: PU coated
- Kulur: Iswed
- Piż Totali: Madwar 0.1 kg
- Kompatibilità: SW-Motech Jetpack Rear Bag (3-6L)
8. Garanzija u Appoġġ
For warranty information or technical support, please refer to the official SW-Motech webis-sit jew ikkuntattja lin-negozjant awtorizzat tiegħek. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.





