Lian Li O11 Vision ATX Mid Tower PC Case Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Lian Li O11 Vision ATX Mid Tower PC Case. Designed in collaboration with PC Master Race (PCMR), the O11 Vision offers a seamless view of your system components through its three-sided tempered glass panels and a dual-chamber design for optimized cable management and cooling performance. Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation.

Figure 1: Lian Li O11 Vision White PC Case Overview

2. Informazzjoni dwar is-Sigurtà

• Always disconnect the power supply from the wall outlet before performing any installation, maintenance, or modification inside the PC case.
• Handle tempered glass panels with care. Although durable, they can break if subjected to sharp impacts or excessive force.
• Avoid touching electronic components directly to prevent electrostatic discharge (ESD). Use an anti-static wrist strap if available.
• Żomm partijiet żgħar u għodda 'l bogħod mit-tfal.
• Kun żgur li l-kejbils kollha huma mgħoddija u mwaħħlin sew biex tevita interferenza mal-fannijiet jew partijiet oħra li jiċċaqalqu.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:

• Lian Li O11 Vision ATX Mid Tower PC Case
• Kaxxa tal-Aċċessorji (li fiha viti, rabtiet tal-kejbil, u partijiet żgħar oħra)
• Alternative Top Panel (ventilated or glass, depending on pre-installed option)
• Manwal ta' Istruzzjoni

4. Setup u Installazzjoni

4.1. Panel Removal and Installation

The O11 Vision features three tempered glass panels for an unobstructed view. These panels are designed for easy removal to facilitate component installation.

1. To remove a side or front glass panel, gently pull it away from the chassis. The panels are secured by a corner magnet system designed to withstand 35kg of force, ensuring stability.
2. For the top panel, unscrew the retaining screws and slide the panel off. The case includes an alternative top panel (either ventilated for enhanced airflow or a glass panel for aesthetics) which can be freely replaced.
3. To reinstall, align the panel with its respective slots and gently push until the magnets engage or screws are tightened.

Figure 2: Seamless Tempered Glass Panels

Figure 3: Modular Design for Easy Assembly

Video 1: Demonstrates the removal of panels and general case features for a clean build.

4.2. Motherboard Tray

The O11 Vision features an adjustable and removable motherboard tray, simplifying the installation of your motherboard, CPU pump, and graphics card outside the chassis.

Figure 4: Adjustable Motherboard Tray and Removable Bottom Fan Bracket

4.3. Installazzjoni tal-Fann u r-Radjatur

The case supports extensive cooling configurations, including up to two 360mm radiators and one 240mm radiator, with space for 8-11 fans. The 27mm tall feet and hollowed-out fan bracket with 13mm elevation ensure ample cold air intake.

• Parentesi tal-qiegħ: Supports up to three 140mm fans or three 120mm fans. The bottom fan bracket is removable for easier radiator or fan installation and dust filter cleaning.
• Exhaust ta' wara: You can mount two 120mm fans for rear exhaust or install a 240mm radiator. Alternatively, one 120mm fan can be installed to allow more radiator space at the bottom.
• Side Fan Bracket: The two-way reversible side fan bracket offers flexibility for different configurations, providing 75mm space in the main chamber or 116.5mm for push-pull setups.

Figure 5: Superior Cooling Configuration

Figure 6: High Mode Fan Setup

Figure 7: Low Mode Fan Setup

Video 2: Guide for AIO and fan installation in the Lian Li O11 Vision Compact case.

4.4. Installazzjoni ta 'Provvista ta' Enerġija

The O11 Vision utilizes a dual-chamber design, with the power supply unit (PSU) mounted in the rear chamber. The PSU mounting bracket protrudes 15mm from the rear, providing extra space for cable management.

Vidjo 3: Dwarview of Lian Li EG1200G PSU and Edge Hub, demonstrating PSU features relevant to dual-chamber cases.

4.5. Ġestjoni tal-Kejbil

The dual-chamber design is optimized for clean cable management, keeping the main chamber aesthetically pleasing.

• Klipps tal-Kejbil Flessibbli: Two dual-layer cable clips can be mounted anywhere along vertical grommets, offering versatility for cable routing.
• Bar tal-Ġestjoni tal-Kejbils: A removable bar helps tidy up your system and improve aesthetics.
• Extended Room: The 15mm protruding PSU bracket and cable tie points along the rear help keep I/O cables tidy.

Figure 8: Clean Cable Management

Figure 9: Cable Management Solution

4.6. Installazzjoni tal-Ħażna

The case provides flexible options for storage devices:

• Bracket tal-Ħażna b'ħafna Funzjonijiet: Offers flexibility for cable routing or drive installation, supporting up to three 2.5" SSDs.
• Individual Drive Cage: Supports two 2.5" SSDs or two 3.5" HDDs. These cages can be removed to gain space for cable routing.

Figure 10: Multi-Function Storage and Cable Management Bar

4.7. Installazzjoni tal-GPU

The O11 Vision supports large GPUs up to 455mm in length. The adjustable motherboard tray and two-way reversible side fan bracket provide flexibility for various GPU configurations.

5. Istruzzjonijiet Operattivi

• Buttuna tal-Qawwa: Located on the front I/O panel. Press once to power on your system.
• Portijiet I/O ta' quddiem: The front panel includes 2x USB 3.0 ports, 2x USB 2.0 ports, and audio jacks for convenient connectivity.

6. Manutenzjoni

• Filtri tat-Trab: The O11 Vision includes removable dust filters, particularly for the bottom fan bracket. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case.
• Tindif ta' barra: Uża artab, damp cloth to clean the exterior surfaces and glass panels. Avoid abrasive cleaners or solvents that may damage the finish.

7 Issolvi l-problemi

• Is-Sistema Mhux Tixgħel: Ensure all power cables (24-pin ATX, CPU, GPU, SATA) are securely connected to the power supply and motherboard. Verify the power supply switch is in the 'ON' position.
• Fannijiet Mhux Iduru: Check fan connections to the motherboard or fan controller. Ensure sufficient power is supplied.
• Is-sħana żejda: Verify proper fan orientation for optimal airflow (intake/exhaust). Ensure radiators are clean and not obstructed.
• Pannelli sfużi: Re-seat glass panels firmly until magnets engage. Tighten any retaining screws for other panels.
• For further assistance, consult your motherboard manual or the Lian Li official support resources.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For specific warranty information and terms, please refer to the official Lian Li website or the warranty card included with your product. If you encounter any issues or require technical assistance, please contact Lian Li customer support through their official channels.