Introduzzjoni
This manual provides detailed instructions for the safe and effective operation and maintenance of your ACEZUK Portable Car Jump Starter with Air Compressor. This versatile device combines a powerful jump starter for 12V vehicles (up to All Gas/10.0L Diesel engines) with a 150PSI air compressor, a portable power bank, and an LED flashlight. Please read this manual thoroughly before first use and keep it for future reference.
Image: The ACEZUK Portable Car Jump Starter, showing the main unit, smart jumper cables, air hose, various nozzles, USB-C charging cable, and carrying case.
Informazzjoni dwar is-Sigurtà
Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat u lill-vettura:
- Do not allow the smart clamps to touch each other when connected to the jump starter.
- Kun żgur li l-konnessjoni tal-polarità hija xierqa (il-klamp aħmar)amp għal pożittiv, iswed clamp to negative) to avoid damage.
- Taqbiżx il-batterija ffriżata.
- Immediately remove the smart clamps from the car battery after a successful jump start.
- Do not operate the air compressor continuously for extended periods. Allow it to cool down if it becomes hot.
- Żomm l-apparat 'il bogħod mit-tfal.
- Aħżen f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi għoljin.
- Recharge the device every 2-3 months to maintain battery health, even if not in use.
The device incorporates 10 intelligent safety protections:
- ✓ Over Current Protection
- ✓ Over Temperature Protection
- ✓ Over Charge Protection
- ✓ Over Discharge Protection
- ✓ Over Voltage Protezzjoni
- ✓ Short Circuit Protection
- ✓ Reverse Polarity Protection
- ✓ Spark Proof
- ✓ Anti-Interference Protection
- ✓ Low Temperature Protection
Image: Visual representation of the 10 safety protections integrated into the jump starter, including over current, over temperature, and reverse polarity protection.
Kontenut u Komponenti tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- 1 x ACEZUK Jump Starter with Air Compressor
- 1 x Smart Jumper Cables
- 1 x Air Pump Hose
- 4 x Gas Nozzles (for various inflatables)
- 1 x Cable tal-Iċċarġjar USB-C
- 1 x Manwal għall-Utent
- 1 x Portable EVA Carrying Case
Image: Detailed diagram highlighting the various components and controls of the ACEZUK jump starter, including the LED light, LCD display, EC5 port, USB ports, and control buttons.
Komponenti Ewlenin:
- Display LCD kbir: Shows battery level, inflation pressure, operational status, and error codes.
- EC5 Port: For connecting the smart jumper cables.
- USB Output Ports (USB1, USB2): For charging external electronic devices.
- Port tad-Dħul/Ħruġ tat-Tip Ċ: For charging the jump starter and charging external devices.
- Air-filled Hole: For connecting the air pump hose.
- Dawl LED: Multi-mode flashlight (Bright, Strobe, SOS).
- Buttuni tal-Kontroll: Mode button, OK button, +/- buttons, Light button, Power button.
Setup
Before first use, fully charge the ACEZUK jump starter. Although it may show some charge upon arrival, a full charge ensures optimal performance and battery longevity.
- Connect the provided USB-C charging cable to the Type-C port on the jump starter.
- Connect the other end of the USB-C cable to a 5V/2A (or higher) USB adapter (not included).
- The LCD display will indicate charging status. Charge until the battery indicator shows full.
It is recommended to charge the jump starter every 2-3 months to activate the battery and prolong its lifespan, especially if it has not been used for an extended period.
Istruzzjonijiet Operattivi
Kif Aqbeż Ibda l-Karozza Tiegħek
Kun żgur li l-jump starter għandu mill-inqas 25% ċarġ qabel ma tipprova tibda vettura.
- Insert the jump cable: Connect the smart jumper cable plug firmly into the EC5 port on the jump starter.
- Qabbad il-clamps: Waħħal l-aħmar (+) clamp to the positive terminal of the car battery and the black (-) clamp mat-terminal negattiv. Kun żgur li l-konnessjoni hija sigura.
- Start your car engine: Ladarba l-clamps are correctly connected and the smart cable indicator is green, start your car's engine.
- Neħħi l-clamps: Immediately remove the smart clamps from the car battery once the engine has started. Then, disconnect the smart cable from the jump starter.
Image: Step-by-step visual guide demonstrating how to connect the jump starter to a car battery and start the engine.
Note: Please immediately remove the smart clamps after starting the car to prevent damage to the device.
Bl-użu tal-Kumpressur tal-Ajru
The integrated air compressor can inflate tires for cars, motorcycles, bikes, and various balls.
- Assemble the tube: Screw the air pump hose onto the air-filled hole on the jump starter.
- Connect the tube to the tire: Securely attach the other end of the hose to the tire valve.
- Adjust inflation amount: Use the "M" button to select the desired mode (car, motorcycle, bike, ball). Use the "+" and "-" buttons to set the target PSI/BAR/KPA.
- Agħfas il-buttuna tal-qawwa: Press the power button to start inflation. The compressor will automatically stop when the preset pressure is reached.
Image: A combined visual guide showing the steps for both jump starting a car and inflating a tire with the device.
Note: Do not use the air pump function continuously for more than 10 minutes. If the compressor gets seriously hot, allow it to cool down for a few minutes before continuing.
Funzjonalità tal-Power Bank
The jump starter can also serve as a portable power bank to charge your electronic devices.
- Connect your device's USB charging cable to either the USB1, USB2, or Type-C output port on the jump starter.
- Il-jump starter jibda jiċċarġja t-tagħmir tiegħek awtomatikament.
Image: The ACEZUK jump starter connected to and charging various electronic devices such as phones, tablets, and smartwatches, demonstrating its power bank capability.
Operazzjoni tal-flashlight
Il-flashlight LED integrata toffri diversi modi ta' dawl għal diversi sitwazzjonijiet.
- Press the Light button once to turn on the Bright mod.
- Press the Light button again to switch to Strobe mod.
- Press the Light button a third time to activate SOS mod.
- Press the Light button a fourth time to turn off the flashlight.
Image: The ACEZUK jump starter with its powerful 400 lumen LED light active, illustrating the bright, strobe, and SOS lighting modes.
Manutenzjoni
Proper maintenance ensures the longevity and reliability of your ACEZUK jump starter:
- Iċċarġjar regolari: Recharge the device every 2-3 months, even if not in use, to prevent deep discharge and maintain battery health.
- Ħażna: Store the device in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
- Tindif: Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Kura tal-Cable: Inspect jumper cables and clamps for any damage before each use. Replace if frayed or damaged.
Issolvi l-problemi
Jekk tiltaqa' ma' problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-apparat ma jixgħelx. | Il-batterija hija skarikata kompletament. | Charge the device fully using the USB-C cable and a 5V/2A adapter. |
| Car does not jump start. | Low device charge (below 25%). Incorrect clamp connection. Severely damaged car battery. | Ensure device is charged above 25%. Check clamp polarity and secure connection. Consult a mechanic if car battery is severely damaged. |
| Smart clamps show error indicator. | Reverse polarity, short circuit, or other safety trigger. | Skonnettja clamps, check connections, and re-attempt. Refer to the display for specific error codes. |
| Air compressor stops prematurely or overheats. | Continuous operation for too long. Obstruction in hose. | Allow the compressor to cool down for several minutes. Check hose for kinks or blockages. |
| LCD display shows abnormalities. | Internal error or specific operational issue. | Refer to the user manual's detailed error code section (if available) or contact customer support. |
For issues not covered here, please contact ACEZUK customer support.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | ACEZUK |
| Mudell | M022 |
| L-ogħla Kurrenti | 7000 Amps |
| Kompatibilità tal-Magna | All Gas / 10.0L Diesel (12V vehicles) |
| Pressjoni tal-Kompressur tal-Arja | 150 PSI (35 L/min airflow) |
| Tip ta 'batterija | Polimer tal-litju (inkluż) |
| Output tal-Bank tal-Enerġija | 2 x USB (5V 3.1A), 1 x Type-C (5V 3A) |
| Flashlight Lumen | 400 Lumen LED |
| Dimensjonijiet tal-Prodott | 1.53"D x 3.64"W x 7.12"H |
| Piż tal-oġġett | 2.64 libbra (1.2 Kilogrammi) |
| Temperatura operattiva | -4°F sa 140°F (-20°C sa 60°C) |
Image: The ACEZUK jump starter displayed with indicators for its wide operating temperature range, from -4°F (-20°C) to 140°F (60°C).
Garanzija u Appoġġ
ACEZUK offers comprehensive support for your product:
- Garanzija: 2-YEAR FREE Warranty.
- Appoġġ Tekniku: Appoġġ Tekniku tul il-Ħajja.
- Servizz tal-Klijent: 7/24 Customer Service available.
For any inquiries, technical assistance, or warranty claims, please contact ACEZUK customer service through the contact information provided on the product packaging or the official ACEZUK websit.
