1. Introduzzjoni
The ONVIS Smart Motion Sensor (model SMS2) is a versatile smart home device designed to enhance your home security and automation. It integrates a Passive Infrared (PIR) motion detector with a wireless hygrometer and thermometer, providing comprehensive environmental monitoring. This sensor leverages Thread technology for improved responsiveness and works seamlessly with Apple HomeKit, allowing for advanced automation and privacy-focused data handling.
Figure 1.1: ONVIS Smart Motion Sensor (SMS2) and iPhone showing a motion detection alert.
Key features include real-time motion detection, temperature and humidity monitoring, and compatibility with Apple HomeKit for voice control via Siri and integration into smart home routines. All data is end-to-end encrypted and stored locally on your iOS devices, ensuring 100% privacy with no cloud storage or tracking.
Figura 1.2: Aktarview of ONVIS SMS2 features including Thread support and privacy.
2. Setup u Installazzjoni
2.1 Kontenut tal-Pakkett
- ONVIS Smart Motion Sensor (SMS2)
- 2 x Batteriji AAA (installati minn qabel jew inklużi)
- Mounting accessories (screws and anchors)
- Manwal għall-Utent (dan id-dokument)
2.2 Installazzjoni tal-batterija
The ONVIS SMS2 sensor is powered by two AAA alkaline batteries. These are typically included and may be pre-installed. If not, open the battery compartment on the back of the device and insert the batteries, ensuring correct polarity (+/-).
2.3 Connecting to Apple HomeKit
The ONVIS SMS2 sensor is designed to work with Apple HomeKit. A Thread HomeKit Hub is required for full functionality and responsiveness. Compatible hubs include:
- Apple TV 4K (2nd Gen, A2169 or later)
- Apple HomePod (it-tieni Ġen)
- Apple HomePod mini
To add the sensor to your HomeKit setup:
- Ensure your Thread HomeKit Hub is powered on and connected to your network.
- Open the Apple Home app on your iOS device (iOS 17.4 or above is required).
- Tap the "+" icon in the top right corner and select "Add Accessory".
- Scan the HomeKit setup code located on the back of the ONVIS SMS2 sensor or its packaging.
- Segwi l-istruzzjonijiet fuq l-iskrin biex tassenja s-sensor ma' kamra u tikkonfigura s-settings tiegħu.
For advanced settings and firmware updates, download the Onvis Home app from the App Store. While the sensor works with HomeKit, the Onvis Home app provides additional controls and access to historical data.
2.4 Immuntar tas-Sensor
The ONVIS SMS2 can be wall-mounted using the included screws and anchors, or placed on a flat surface. For optimal motion detection, consider the following:
- Mount the sensor at a height that allows for clear line-of-sight to the area you wish to monitor.
- Avoid placing the sensor directly facing heat sources, air vents, or direct sunlight, as these can cause false readings.
- The sensor has a maximum detection range of 7 meters (approximately 23 feet) and a 120° coverage angle.
Figure 2.1: Motion sensor coverage area.
3. Tħaddim tas-Sensor
3.1 Sejbien tal-Moviment
The primary function of the ONVIS SMS2 is motion detection. When movement is detected within its range, the sensor can trigger automations in Apple HomeKit, such as turning on lights or sending notifications.
- Notifiki f'ħin reali: Receive instant alerts on your iOS device when motion is detected, even when you are away from home, provided you have a HomeKit hub.
- Smart Light Triggering: Automate your lights to turn on when you enter a room and off after a preset period of no motion.
Figure 3.1: Triggering smart lights with motion detection.
Figure 3.2: Instant notification upon motion detection.
3.2 Monitoraġġ tat-Temperatura u l-Umdità
The ONVIS SMS2 includes integrated temperature and humidity sensors. These readings are automatically updated every 15 minutes and can be accessed via the Apple Home app or the Onvis Home app.
- Dejta ta' Aċċess: Ask Siri for current room temperature and humidity, or view records in the Apple Home app.
- Rekords Storiċi: The Onvis Home app allows you to check temperature, humidity, and motion records, with up to 100 recent records and 32 days of historical data.
- Awtomazzjoni: Use temperature and humidity readings as triggers for HomeKit automations, such as activating a humidifier or dehumidifier.
Figure 3.3: Voice control for temperature and humidity readings.
Figure 3.4: Temperature and humidity monitoring capabilities.
Figure 3.5: Sensor used in a greenhouse, demonstrating data storage.
3.3 Smart Activation & Deactivation
The Onvis app allows you to customize motion alerts and set specific time slots for motion detection. This provides complete control over when you receive notifications and when automations are active.
- Scheduled Detection: Configure the sensor to only detect motion during specific hours, aligning with your daily routine and preventing unnecessary alerts.
- Disable Sensor: The Onvis app and certain 3rd party HomeKit apps allow you to disable the motion sensor, preventing it from triggering automations. This feature is exposed to HomeKit, enabling its use in Scenes, Automations, and Shortcuts.
Figure 3.6: Personalizing monitoring times for the sensor.
3.4 Sensor tad-Dawl tal-Jum
The sensor includes a daylight detection feature, which can be used to ensure lights only come on when needed, optimizing energy usage.
Figure 3.7: Daylight sensor detects ambient light.
4. Manutenzjoni
4.1 Sostituzzjoni tal-batterija
The ONVIS SMS2 uses 2 AAA alkaline batteries. The battery life is approximately 8,760 hours (about 1 year). When the battery level is low, you may receive a notification in the Apple Home app or Onvis Home app. To replace the batteries:
- Carefully remove the sensor from its mounting location.
- Iftaħ l-għatu tal-kompartiment tal-batterija fuq wara tal-apparat.
- Remove the old batteries and insert new AAA alkaline batteries, observing the correct polarity.
- Close the battery compartment cover and re-mount the sensor.
4.2 Tindif
To ensure optimal performance, keep the sensor clean. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or immerse the device in water.
4.3 Aġġornamenti tal-Firmware
Periodically check for firmware updates using the Onvis Home app. Firmware updates can improve performance, add new features, and address any known issues. Ensure the sensor has sufficient battery life before initiating an update.
5 Issolvi l-problemi
| Ħruġ | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Sensor not responding/offline in Home app. | Low battery, out of range of Thread HomeKit Hub, hub offline, network issues. | Check battery level and replace if necessary. Ensure sensor is within range of your Thread HomeKit Hub. Verify your HomeKit Hub (Apple TV, HomePod mini) is online and connected to the internet. Restart your HomeKit Hub and Wi-Fi router. |
| False motion detections. | Heat sources, direct sunlight, pets, drafts. | Relocate the sensor away from heat sources (radiators, direct sunlight), air vents, or areas with frequent pet movement. Adjust motion sensitivity in the Onvis Home app if available. |
| Motion-based automations not working in iOS Home app (17.2). | Known software issue with iOS Home app (17.2). | As noted by ONVIS, motion-based HomeKit automations for SMS2 can be set up in the Onvis Home app or most 3rd party HomeKit apps. The configuration will sync to the HomeKit system. This issue may be resolved in later iOS versions. |
| Il-qari tat-temperatura/umdità jidher li mhux preċiż. | Sensor placement, environmental factors. | Ensure the sensor is not in direct sunlight, near heat sources, or in a drafty area. Allow time for readings to stabilize after placement. Some 3rd party HomeKit apps or the Onvis app may offer calibration options. |
| Cannot add sensor to HomeKit. | Incorrect setup code, existing pairing, HomeKit hub issues. | Double-check the HomeKit setup code. Ensure the sensor is reset if it was previously paired. Verify your HomeKit hub is functioning correctly and updated. |
If you continue to experience issues, please refer to the support section or contact ONVIS customer service.
6. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | SMS2 |
| Brand | ONVIS |
| Kulur | Abjad |
| Sors tal-Enerġija | Mħaddma bil-batterija |
| Tip ta 'batterija | 2 x Batteriji Alkalini AAA (inklużi) |
| Ħajja tal-batterija | Madwar 8,760 siegħa (sena) |
| Piż tal-oġġett | 3.52 uqija |
| Dimensjonijiet tal-Prodott | 2.5 x 1.9 x 1.45 pulzieri |
| Maximum Motion Range | 7 Metri (madwar 23 pied) |
| Angolu ta 'Sejbien tal-Moviment | 120° |
| Tip ta 'Immuntar | Mount Wall |
| Temperatura operattiva | 14°F sa 113°F (-10°C sa 45°C) |
| Medda ta 'Umdità | 5% sa 95% |
| Apparati Kompatibbli | Apple HomeKit (meħtieġ iOS 17.4 u aktar tard) |
| Konnettività | Thread (requires Thread HomeKit Hub) |
| Ħażna tad-Data | 100 recent records, 32 days historical data (Onvis Home app) |
7. Garanzija u Appoġġ
7.1 Informazzjoni dwar Garanzija
ONVIS products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official ONVIS websit għal termini u kundizzjonijiet dettaljati tal-garanzija. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.
7.2 Appoġġ għall-Klijent
For technical assistance, troubleshooting, or general inquiries, please contact ONVIS customer support. You can usually find contact information on the official ONVIS website or within the Onvis Home app.
Official ONVIS Websit: www.onvis.com (Nota: Dan huwa detentur tal-post URL peress li m'hemm l-ebda appoġġ speċifiku URL was provided in the input.)
Onvis Home App: Available on the Apple App Store for iOS devices.
