Manwal tal-Utent tal-BRPOM BM502 Car Jump Starter

1. Introduzzjoni

This manual provides essential information for the safe and effective operation of your BRPOM BM502 Car Jump Starter. Please read thoroughly before use to ensure proper handling and to maximize the lifespan of your device.

Informazzjoni Importanti dwar is-Sigurtà

• Always ensure the product is fully charged before first use to avoid "virtual power" situations.
• Do not connect the red (positive) clamp to the negative (-) terminal or the black (negative) clamp mat-terminal pożittiv (+) tal-batterija tal-vettura.
• Immediately remove the jump cables from the vehicle battery and then from the jump starter once the engine has started.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Żarmax jew timmodifikax l-apparat.
• Avoid exposure to extreme temperatures, direct sunlight, or moisture.

2. Kontenut tal-Pakkett

X'hemm fil-Kaxxa

• 1 x BRPOM Jump Starter
• 1 x Smart Jumper Cable
• 1 x Cable tal-Iċċarġjar tat-Tip-Ċ
• 1 x Manwal għall-Utent
• 1 x Kaxxa tal-Ħażna Portabbli

An image showing the BRPOM jump starter, smart jumper cables, Type-C charging cable, user manual, and portable storage box.

3. Prodott Aktarview

The BRPOM BM502 Car Jump Starter is a versatile device designed for emergency vehicle starting, portable power, and illumination.

Karatteristiċi ewlenin:

• Kurrent Massimu ta' 7000A: Reliably starts all 12V dead batteries, including up to ALL Gas/10L Diesel engines.
• 26800mAh Backup Battery Charger Power Bank: Features 2 smart USB output ports (including 18W Quick Charge) for charging mobile devices.
• Flashlight LED qawwi: Offers 3 modes (lighting/flash/SOS) for various circumstances, usable for up to 48 hours constantly.
• Heavy-Duty Smart Clamp Kejbils: Reinforced clamps with extended length, bolder cable for better conductivity, and built-in 8 protections with visible alarms.
• Large LCD Smart Screen: Provides clear battery level, operational status, and error indications with user-friendly backlight.

A dettaljata view of the BRPOM BM502 Car Jump Starter, showing its robust design, LED screen, and included smart jumper cables and charging cable.

Comparison image highlighting the clear LCD screen, multiple protection functions, and LCD screen clipping output voltage of the BRPOM jump starter versus other models.

Close-up of the LCD screen displaying accurate battery level, USB ON indicator, and temperature protection lamp, with a bearing temperature range of -4°F / 140°F.

4. Setup

Iċċarġjar Inizjali

Before first use, fully charge the BRPOM BM502 Car Jump Starter. Due to long transportation times, the battery may have "virtual power" and require a full charge to function optimally.

• Connect the provided Type-C charging cable to the jump starter's Type-C input port.
• Connect the other end of the cable to a suitable USB power adapter (not included).
• Allow approximately 4.5 hours for a full recharge. The LCD screen will indicate the charging progress.

5. Istruzzjonijiet Operattivi

Aqbeż Tibda l-Vettura Tiegħek

1. Insert the smart jump cable into the jump starting port on the jump starter. Ensure a secure connection.
2. Qabbad il-ċl aħmar (pożittiv).amp mat-terminal pożittiv (+) tal-batterija tal-vettura tiegħek.
3. Qabbad l-iswed (negattiv) clamp to the negative (-) terminal of your vehicle's battery.
4. Power on the jump starter by pressing the power button. The LCD screen will display the battery status.
5. Start your car engine. The jump starter is designed to start most vehicles within 1-3 seconds.
6. Immediately remove the smart jump cables from the vehicle battery and then from the jump starter once the engine has started.

A four-step visual guide demonstrating how to jump start a car: inserting the jump cable, connecting clamps to the car battery, starting the engine, and removing the clamps.

Uża l-LED Flashlight

The jump starter features a bright LED flashlight with multiple modes for various situations.

• Dawl: Agħfas fit-tul il-buttuna tal-qawwa biex tixgħel il-flashlight.
• SOS Modes: Short press the power button to cycle to SOS mode.
• Flash Alternatively (Strobe): Short press the power button to cycle to strobe mode.
• Modi ta' Twissija: Short press the power button to cycle to warning mode (red and blue flashing lights).

Visual representation of the four LED light modes: Flashlight (steady illumination), SOS Modes (Morse code SOS signal), Flash Alternatively (strobe light), and Warning Modes (alternating red and blue lights).

Użu bħala Power Bank

The BRPOM BM502 can also serve as a portable power bank to charge your electronic devices.

• Connect your device's USB charging cable to one of the jump starter's USB output ports (QC3.0 or 5V/2.4A).
• Il-jump starter jibda jiċċarġja t-tagħmir tiegħek awtomatikament.

An illustration showing the jump starter charging a tablet and a smartphone simultaneously via its USB and Type-C output ports, highlighting its 26800mAh backup power capacity.

6. Manutenzjoni u Ħażna

Kura Ġenerali

• Store the jump starter in its portable storage box in a cool, dry place away from direct sunlight and moisture.
• Evita li twaqqa’ jew tissuġġetta l-apparat għal impatti qawwija.
• Naddaf il-barra b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew abrażivi.
• Recharge the unit every 3-6 months, even if not used, to maintain optimal battery health.

7 Issolvi l-problemi

Kwistjonijiet Komuni u Soluzzjonijiet

Note on Initial Charge:

As mentioned in the product features, if the unit does not start or charge initially, it may be due to "virtual power" from prolonged shipping. A full charge (4-5 hours) is recommended before the very first use.

8. Speċifikazzjonijiet

Speċifikazzjonijiet Tekniċi

9. Garanzija u Appoġġ

Servizz tal-Klijent

For warranty information, technical support, or any inquiries regarding your BRPOM BM502 Car Jump Starter, please refer to the contact information provided on the product packaging or the official BRPOM websit.