Manwal tal-Istruzzjonijiet għat-Tindif Robotiku tal-Pixxini BWT Cosmy The Bot 250

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta’ sigurtà li ġejjin biex tnaqqas ir-riskju ta’ korriment jew ħsara:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Żomm it-tfal u l-annimali domestiċi 'l bogħod miż-żona tal-pixxina meta l-apparat tat-tindif ikun qed jaħdem.
• Uża l-apparat tat-tindif biss f'temperaturi tal-ilma bejn 10°C (50°F) u 35°C (95°F).
• Do not use the cleaner if there are people in the pool.
• Kun żgur li l-apparat tat-tindif ikun mgħaddas għalkollox qabel tibda topera.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Komponenti tal-Prodott

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Unità Prinċipali: The robotic cleaner body, housing the motor and filtration system.
• Filtru Basket: Removable basket for collecting debris.
• Brushes/Rollers: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• Unità tal-Provvista tal-Enerġija: Converts AC power to safe DC power for the cleaner.

Stampa 3.1: Quddiem view of the cleaner, highlighting the cleaning brushes and intake area.

Immaġni 3.2: Il-qiegħ view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

Immaġni 3.3: Interna view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Setup

1. Iftaħ il-Cleaner mill-pakkett: Oħroġ bir-reqqa l-apparat tat-tindif u l-aċċessorji kollha mill-imballaġġ.
2. Connect the Floating Cable: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Poġġi fil-Pixxina: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Ipplaggja: Ipplaggja l-unità tal-provvista tal-enerġija f'sokit elettriku ertjat.

5. Istruzzjonijiet Operattivi

1. Ibda ċ-Ċiklu tat-Tindif: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Aġġusta l-Qawwa tal-Ġbid: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Tindif tal-Monitor: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Neħħi mill-Pixxina: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Manutenzjoni

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

6.1. Tindif tal-Basket tal-Filtru

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Skonnettja l-Enerġija: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Kompartiment tal-Filtru Miftuħ: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Neħħi l-Basket tal-Filtru: Grasp the handle of the filter basket and lift it out of the cleaner.
4. Laħlaħ Filtru: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Erġa' daħħal il-Filtru: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Agħlaq l-għatu: Close the filter compartment lid securely.

Immaġni 6.1: Fuq view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Tindif u Ħażna Ġenerali

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures.
• Coil the floating cable loosely to prevent kinks or damage.

7 Issolvi l-problemi

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

Manifattur: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.