BEMOONY H7 3.2L Cat Water Fountain Instruction Manual

1. Introduzzjoni

This instruction manual provides essential information for the safe and effective use of your BEMOONY H7 3.2L Cat Water Fountain. This product is designed to provide a continuous supply of fresh, filtered water for your pets, encouraging healthy hydration habits. Please read this manual thoroughly before initial use and retain it for future reference.

2. Istruzzjonijiet tas-Sigurtà

Biex tiżgura tħaddim sikur u tevita korrimenti jew ħsara, jekk jogħġbok segwi l-linji gwida ta' sigurtà li ġejjin:

• Dan l-apparat huwa maħsub għal użu fuq ġewwa biss. Tużax barra.
• Dejjem unplug the fountain from the power outlet before cleaning, disassembling, or performing any maintenance.
• Keep the power cord away from areas where pets might chew on it. If the cord is damaged, discontinue use immediately.
• Ensure the water level is always maintained between the MIN and MAX indicators to prevent the pump from running dry.
• Do not allow children to play with or operate the fountain.
• Use only original BEMOONY replacement parts and accessories.
• Place the fountain on a stable, level surface to prevent tipping.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti u f'kundizzjoni tajba meta tiftaħ il-pakkett:

• Cat Fountain Unit (Base and Water Tray) x1
• Pompa tal-Ilma x1
• Faucet Outlet x1
• Filtru tal-Karbonju x1
• Cotton Filter (Pre-filter Sponge) x1
• Adapter tal-Enerġija x1
• Manwal ta' Istruzzjoni x1

Figura 3.1: Komponenti Inklużi

4. Istruzzjonijiet ta' Setup

Follow these steps to assemble and prepare your BEMOONY H7 Cat Water Fountain for first use:

1. Komponenti nodfa: Wash all parts of the fountain (excluding the pump and power adapter) with mild soap and water. Rinse thoroughly.
2. Installa l-Pompa: Place the water pump into the designated slot in the fountain base. Ensure the power cord is routed correctly through the notch.
3. Daħħal Filtri: Place the cotton filter (sponge) around the pump. Then, insert the carbon filter into its compartment in the water tray.
4. Assemble Tray and Faucet: Place the water tray onto the base, ensuring it sits securely. Attach the faucet outlet to the pump's spout.
5. Imla bl-Ilma: Fill the fountain with clean water up to the MAX level indicated on the translucent tank. Do not overfill.
6. Qabbad l-Enerġija: Connect the power adapter to the fountain's power cord and then plug it into a standard electrical outlet. The fountain will begin operating.

Figura 4.1: Passi tal-Assemblaġġ

5. Istruzzjonijiet Operattivi

Once assembled and powered on, the BEMOONY H7 Cat Water Fountain operates continuously, providing circulating water for your pets.

• Monitoraġġ tal-Livell tal-Ilma: The fountain features a translucent water tank with MIN and MAX indicators. Regularly check the water level and refill as needed to ensure the pump remains submerged and to prevent it from running dry. The integrated LED light assists in nighttime visibility of the water level.
• Disinn tal-faucet: The faucet spout provides a flowing stream of water, which can encourage pets, especially cats, to drink more frequently.
• Operazzjoni kwieta: The fountain is designed with an ultra-quiet pump to minimize noise, providing a comfortable drinking environment for your pets.

Figure 5.1: Water Level Indicators

Figure 5.2: Faucet Water Flow

6. Manutenzjoni

Tindif regolari u sostituzzjoni tal-filtru huma kruċjali biex tinżamm il-kwalità tal-ilma u tittawwal il-ħajja tal-funtana tiegħek.

6.1 Tindif tal-Funtana

• Frekwenza: Clean the fountain at least once a week, or more frequently if you have multiple pets or notice debris.
• Passi:
  1. Unplug the fountain and disassemble all removable parts (water tray, faucet, filters, pump).
  2. Wash the water tray and base with mild soap and water. Use a soft brush to clean any hard-to-reach areas.
  3. Laħlaħ il-partijiet kollha sewwa biex tneħħi kwalunkwe residwu tas-sapun.
  4. Clean the pump by removing its cover and impeller. Rinse the impeller and the pump's interior under running water. Reassemble the pump.
  5. Dry all components before reassembly.

Figura 6.1: Proċess ta' Tindif

6.2 Sostituzzjoni tal-Filtru

• Filtru tal-Karbonju: Replace the carbon filter every 2-4 weeks, or sooner if the water appears cloudy or has an odor.
• Cotton Filter (Pre-filter Sponge): Replace the cotton filter every 1-2 months, or when it appears heavily soiled.
• Passi:
  1. Unplug the fountain and remove the water tray.
  2. Remove the old carbon and cotton filters. Dispose of them responsibly.
  3. Rinse new filters under running water before placing them into their respective compartments.
  4. Reassemble the fountain and refill with fresh water.

Figure 6.2: Replacement Filters

7 Issolvi l-problemi

If you encounter issues with your BEMOONY H7 Cat Water Fountain, refer to the following table for common problems and solutions:

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Your BEMOONY H7 Cat Water Fountain is covered by a garanzija ta 'sena mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura u malfunzjonamenti taħt użu normali.

For warranty claims, technical support, or any questions regarding your product, please contact BEMOONY customer service. Refer to the contact information provided on the product packaging or the official BEMOONY websit għall-għajnuna.