SpeaKa Professional SP-TVC-1000

SpeaKa Professional SP-TVC-1000 Dual TV Mobile Cart Instruction Manual

Introduzzjoni

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SpeaKa Professional SP-TVC-1000 Dual TV Mobile Cart. This mobile cart is designed to securely hold two televisions ranging from 32 to 65 inches, offering height adjustability for optimal viewing. Please read this manual thoroughly before installation and use to ensure safe and correct operation.

Istruzzjonijiet tas-Sigurtà

  • Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-assemblaġġ. Tużax jekk xi partijiet huma neqsin jew difettużi.
  • Assembly should be performed by at least two people to prevent injury or damage.
  • Do not exceed the maximum weight capacity specified for the cart and TV mounts.
  • Dejjem illokkja r-roti meta l-karrettun ikun wieqaf biex tevita moviment aċċidentali.
  • Żomm it-tfal u l-annimali domestiċi 'l bogħod miż-żona tal-assemblaġġ. Partijiet żgħar jistgħu jkunu perikolużi biex wieħed jifga.
  • Ensure the TV is securely mounted to the brackets before placing it on the cart.
  • Avoid placing the cart on uneven surfaces to prevent tipping.
  • Do not hang or climb on the cart.

Kontenut tal-Pakkett

Please verify that all components listed below are included in your package. If any parts are missing or damaged, contact customer support immediately.

  • Main support column(s)
  • Bażi bir-roti
  • TV mounting brackets (2 sets)
  • Horizontal support bars
  • Hardware kit (screws, washers, spacers, wrenches)
  • Manwal ta' Istruzzjoni

Setup u Assemblea

Follow these general steps for assembling your SpeaKa Professional SP-TVC-1000 TV Mobile Cart. Refer to the included assembly diagram for detailed illustrations.

  1. Waħħal ir-Roti mal-Bażi: Securely fasten the caster wheels to the base of the cart using the provided hardware. Ensure all wheels are firmly attached and can rotate freely. Lock two of the wheels to prevent movement during subsequent steps.
  2. Assemble Base and Column: Connect the main support column(s) to the assembled base. Use the appropriate screws and tools to ensure a stable connection.
  3. Install Horizontal Support Bars: Attach the horizontal support bars to the main column(s) at the desired height. These bars will hold the TV mounting brackets.
  4. Ipprepara l-Brakketti tal-Immuntar tat-TV: Attach the vertical TV mounting brackets to the back of your televisions. Select the correct screws and spacers that fit your TV's VESA mounting holes. Ensure the brackets are centered and level.
  5. Mount TVs to Cart: With assistance, carefully lift each television and hook the attached vertical brackets onto the horizontal support bars of the cart. Secure the TVs in place using the safety screws or locking mechanisms provided.
  6. Kontrolli Finali: Verify that all connections are tight and secure. Gently test the stability of the cart and mounted TVs before use.
Assembled SpeaKa Professional SP-TVC-1000 Dual TV Mobile Cart

Figura 1: Fully assembled SpeaKa Professional SP-TVC-1000 Dual TV Mobile Cart, showing two TVs mounted on the height-adjustable column with a stable wheeled base.

Istruzzjonijiet Operattivi

  • Nimxu l-Karrettun: Unlock all caster wheels before moving the cart. Push the cart slowly and carefully, avoiding sudden stops or turns, especially on uneven surfaces. Re-lock the wheels once the cart is in its desired position.
  • Aġġustament tal-Għoli tat-TV: The cart features a height-adjustable column. To adjust the height, loosen the locking mechanisms on the main column, carefully raise or lower the TV assembly to the desired viewing height, and then securely tighten the locking mechanisms. Always ensure both TVs are level after adjustment.
  • Ġestjoni tal-Kejbil: Utilize any integrated cable management features (e.g., clips, channels) to route and secure TV and power cables, preventing tripping hazards and maintaining a tidy appearance.

Manutenzjoni

  • Tindif: Naddaf l-uċuħ tal-karrettun b'drapp artab u dryer.amp drapp. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
  • Kontrolli regolari: Iċċekkja l-viti u l-konnessjonijiet kollha perjodikament biex tiżgura li jibqgħu ssikkati u siguri. Erġa' ssikka jekk meħtieġ.
  • Spezzjoni tar-rota: Inspect the caster wheels for any debris or damage that might impede smooth movement. Clean or replace as needed.

Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Cart is unstable or wobbles.Konnessjonijiet laxki; art irregolari; mgħobbija żżejjed.Check and tighten all screws. Move cart to a level surface. Ensure TV weight is within limits.
Difficulty moving the cart.Wheels are locked; debris in wheels; damaged wheels.Unlock all caster wheels. Clean any debris from wheels. Replace damaged wheels if necessary.
TVs are not level.Mounting brackets not aligned; height adjustment uneven.Re-check TV bracket installation. Adjust height carefully, ensuring both sides are even.

Speċifikazzjonijiet

  • Mudell: SpeaKa Professional SP-TVC-1000
  • Numru tal-Parti tal-Manifattur: SP-11437688
  • Daqsijiet tat-TV Kompatibbli: 32 - 65 pulzier (81.3 ċm - 165.1 ċm)
  • TV Capacity: Dual TV mounting
  • Karatteristiċi: Height adjustable, Mobile (with caster wheels)
  • Ditta: SpeaKa Professjonali

Garanzija u Appoġġ

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official SpeaKa Professional websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Dokumenti Relatati - SP-TVC-1000

Preview Manwal tal-Installazzjoni tal-Karozza tat-TV SpeaKa Professional SP-TVC-500
Gwida għall-installazzjoni pass pass għall-karrettun tat-TV SpeaKa Professional SP-TVC-500, inklużi prekawzjonijiet ta' sigurtà, lista tal-partijiet, u struzzjonijiet tal-assemblaġġ għal setup ottimali.
Preview SpeaKa Professional SP-TVC-900 Stand tat-TV Motorizzat: Manwal tal-Utent u Gwida għas-Setup
Manwal komprensiv għall-utent għall-istand tat-TV motorizzat SpeaKa Professional SP-TVC-900. Tgħallem kif tinstalla, tħaddem, tqabbad ir-remote, u ssolvi l-problemi ta' dan l-immuntar tat-TV kompatibbli mal-VESA, aġġustabbli fl-għoli, li jappoġġja skrins sa 100 pulzier u 120kg.
Preview Gwida għall-Installazzjoni tal-Karozza tat-TV Speaka Professional - Mudell 3340239 (SP-TVC-710)
Istruzzjonijiet komprensivi għall-installazzjoni tal-Speaka Professional TV Cart (Mudell SP-TVC-710). Din il-gwida tipprovdi assemblaġġ pass pass, twissijiet ta' sigurtà, lista tal-partijiet, u speċifikazzjonijiet għall-immuntar ta' televiżjonijiet sa 75 pulzier u 45kg.
Preview Manwal tal-Istruzzjonijiet tal-Iskrivanija Elettrika Sit-Stand SpeaKa Professional - Mudell 3014210
Manwal ta' struzzjonijiet komprensiv għall-iskrivanija elettrika SpeaKa Professional sit-stand (Mudell 3014210, SP-SSD-B01), li jkopri s-sigurtà, it-tħaddim, is-soluzzjoni tal-problemi, u l-istruzzjonijiet tal-assemblaġġ.
Preview Detentur tal-Monitor Professjonali SpeaKa b'Mola tal-Pressjoni tal-Gass: Sigurtà, Użu, u Dejta Teknika
Istruzzjonijiet dettaljati dwar is-sigurtà, l-użu maħsub, l-immaniġġjar, l-installazzjoni, il-manutenzjoni, u l-ispeċifikazzjonijiet tekniċi għad-detenturi tal-monitor tal-molol tal-gass SpeaKa Professional (mudelli SP-MM-900, SP-MM-910, SP-MM-920, SP-MM-930). Jinkludi speċifikazzjonijiet u twissijiet fit-tabella.
Preview Gwida għall-Installazzjoni tad-Driegħ tal-Monitor Doppju SpeaKa Professional SP-MM-980
Istruzzjonijiet komprensivi għall-installazzjoni tad-driegħ doppju tal-monitor SpeaKa Professional SP-MM-980. Tgħallem kif twaħħal, taġġusta u tibbilanċja l-monitors tiegħek b'mod sigur għal setup ergonomiku ottimali. Jappoġġja VESA 75x75 u 100x100, b'kapaċità ta' piż ta' 2-20 kg għal kull driegħ.