Inkbird ITC-C216T Thermostat Instruction Manual

Introduzzjoni

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

Informazzjoni dwar is-Sigurtà

Ensure the thermostat is connected to a grounded power outlet.
Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
Keep the device away from water, except for the IP67 rated probe.
Tippruvax tiżżarma jew issewwi l-unità int stess. Ikkuntattja l-appoġġ għall-klijenti jekk jinqalgħu xi problemi.
Dejjem aqla l-apparat qabel tnaddaf jew twettaq il-manutenzjoni.

Prodott Overview

Komponenti

Detailed diagram of the Inkbird ITC-C216T thermostat, labeling its components: LCD, operational buttons, output, temperature probe, input, heating icon, cooling icon, timing icon, child lock, start temperature/time, and stop temperature/time.

Immaġni: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

LCD with White Backlight: Displays current and set temperatures/times.
Operational Buttons: MODE, UP, SET, DOWN for navigation and setting adjustments.
Output: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
Sonda tat-Temperatura: 2m/79in long, IP67 waterproof for accurate temperature detection.
Input: 100~240Vac 50/60Hz max 10A.
Ikona tat-tisħin: Indicates heating operation.
Cooling Icon: Indicates cooling operation.
Timing Icon: Indicates timing function is active.
Ikona tal-Lock tat-Tfal: Indicates child lock is engaged.
BIDU: Displays start temperature or time.
Waqqaf: Displays stop temperature or time.

Karatteristiċi Ewlenin

Hand holding the Inkbird ITC-C216T thermostat, highlighting its backlit display, child lock, temperature calibration, memory function, and high/low temperature alarm features.

Immaġni: The Inkbird ITC-C216T thermostat showcasinil-karatteristiċi ewlenin tiegħu.

Wiri LCD b'lura: Easy to read current and set values, even in low light.
Three Control Modes: Temperature, Cycle Time, and Countdown.
Firxa Wiesgħa ta' Temperatura: Controls temperatures from -40°C to 100°C.
Allarmi ta' Temperatura Għolja/Baxxa: Customizable alarm values with an option to mute the buzzer.
Kalibrazzjoni tat-Temperatura: Allows for fine-tuning temperature readings.
Cooling Delay: Protects cooling equipment from short cycling.
Lock tat-tfal: Jipprevjeni bidliet aċċidentali fis-settings.
Funzjoni tal-memorja: Retains all settings after a power interruption.
Sonda li ma jgħaddix ilma minnha IP67: Suitable for use in soil or submerged in water.

Setup

Ippakkja: Carefully remove the thermostat and its components from the packaging.
Ipplaggja: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
Qabbad Apparat: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
Sonda tal-Pożizzjoni: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

Modi Operattivi

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. Temperature Mode

Diagram illustrating the Inkbird ITC-C216T thermostat's cooling and heating capabilities, with temperature ranges from -40°C to 100°C.

Immaġni: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

Agħfas il- MODALITÀ button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
Agħfas SET to enter setting mode. The START temperature will flash. Use the UP u 'L isfel buttons to adjust the desired START temperature.
Agħfas SET again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP u 'L isfel.
Agħfas SET one more time to save the settings and exit.
If START temperature is lower than STOP temperature, the thermostat operates in mod tat-tisħin.
If START temperature is higher than STOP temperature, the thermostat operates in mod tat-tkessiħ.

2. Cycle Time Mode (P01)

Illustration of the Inkbird ITC-C216T thermostat's Cycle Time Mode (P01) setting, showing a device turning on and off at set intervals.

Immaġni: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

Agħfas MODALITÀ until P01 is displayed.
Agħfas SET. The ON time will flash. Adjust using UP/'L isfel.
Agħfas SET. The OFF time will flash. Adjust using UP/'L isfel.
Agħfas SET to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

P02: Countdown ON
Immaġni: Diagram explaining the Countdown ON Mode (P02).
The device will turn ON after the set countdown period.
P03: Countdown OFF
Immaġni: Diagram explaining the Countdown OFF Mode (P03).
The device will turn OFF after the set countdown period.
P04: Countdown ON & OFF
Immaġni: Diagram explaining the Countdown ON&OFF Mode (P04).
The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

Agħfas MODALITÀ until P02, P03, or P04 is displayed.
Agħfas SET. The countdown time(s) will flash. Adjust using UP/'L isfel.
Agħfas SET biex issalva u toħroġ.

Settings Avvanzati

Kalibrazzjoni tat-Temperatura (CA)

Image showing the Inkbird ITC-C216T thermostat displaying 'CA' for temperature calibration, with a gecko in the background.

Immaġni: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

Bl-apparat mixgħul, agħfas u żomm il-buttuna SET button for approximately 3 seconds to enter the parameter settings.
Uża l- UP/'L isfel buttons to navigate to the 'CA' (Calibration) setting.
Agħfas SET, imbagħad uża UP/'L isfel to adjust the calibration value (e.g., +0.5°C or -0.5°C).
Agħfas SET biex tikkonferma u toħroġ.

Cooling Delay (Pt)

Image showing the Inkbird ITC-C216T thermostat displaying 'Pt' for refrigeration delay, with a refrigerator in the background.

Immaġni: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

Enter parameter settings (press and hold SET għal 3 sekondi).
Navigate to 'Pt' (Cooling Delay).
Adjust the delay time in minutes using UP/'L isfel.
Agħfas SET biex tikkonferma u toħroġ.

High/Low Temperature Alarms (AH/AL)

Image showing the Inkbird ITC-C216T thermostat displaying 'AH' for high temperature alarm, with a mute icon, next to a lizard.

Immaġni: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

Enter parameter settings.
Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
Adjust the alarm temperature using UP/'L isfel.
Agħfas SET biex tikkonferma.
To mute the buzzer, press any button when the alarm sounds.

Lock tat-Tfal

Image showing the Inkbird ITC-C216T thermostat with a child lock icon displayed, indicating the safety feature is active.

Immaġni: Thermostat displaying the child lock icon.

To prevent accidental changes to settings, activate the child lock:

Agħfas u żomm il- UP u 'L isfel buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
Repeat the action to unlock the device.

Funzjoni tal-Memorja u Reset tal-Fabbrika

Funzjoni tal-memorja: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
Irrisettjar tal-Fabbrika: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

Applikazzjonijiet

Collage of images showing various applications for the Inkbird ITC-C216T thermostat, including reptile terrariums, fish tanks, home appliances, refrigeration, home brewing, and incubation.

Immaġni: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

Reptile Terrariums and Aquariums
Greenhouses and Plant Propagation
Incubators for Eggs
Home Brewing and Fermentation
Controlling Freezers and Refrigerators
Managing Heating Mats and other Home Appliances

Speċifikazzjonijiet

Karatteristika	Speċifikazzjoni
Mudell	ITC-C216T
Voltage	220V AC
Tagħbija Max Output	10A / 2200W
Firxa ta 'Kontroll tat-Temperatura	-40°C sa 100°C (-40°F sa 212°F)
Medda ta' Żmien	0 to 99 hours 59 minutes
Tip ta' Sonda	IP67 Waterproof
Tul tas-Sonda	2 metri (79 pulzier)
Materjal	Acrylonitrile Butadiene Styrene (ABS)
Dimensjonijiet	8.8 x 8.9 x 13.7 ċm
Piż	250 g
Tip ta' Kontrollur	Buttuna

Issolvi l-problemi

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

Il-wiri ma jixgħelx: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
Qari tat-Temperatura Mhux Preċiż: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
L-Apparat Mhux Mixgħul/Jitfi: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
L-Allarm Jinstema' Kontinwament: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
Is-Settings Mhux Sejrin Jiġu Salvati: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

Manutenzjoni

Tindif: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
Kura tas-Sonda: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
Ħażna: If storing the device for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Garanzija u Appoġġ

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird webis-sit jew ikkuntattja lis-servizz tal-klijenti tagħhom direttament.

Tista' ssib aktar informazzjoni u riżorsi ta' appoġġ billi żżur il- Ħanut Inkbird fuq Amazon.

	Manwal tal-Utent tal-Kontrollur tat-Temperatura Plug and Play tal-Inkbird ITC-308 Dan id-dokument jipprovdi gwida komprensiva għall-Kontrollur tat-Temperatura Plug and Play tal-Inkbird ITC-308, li jiddeskrivi l-karatteristiċi, l-ispeċifikazzjonijiet, it-tħaddim, u l-prekawzjonijiet ta' sigurtà tiegħu għal diversi applikazzjonijiet.
	Manwal tal-Utent tal-Kontrollur tat-Temperatura Plug and Play tal-Inkbird ITC-308 Manwal komprensiv għall-utent għall-Inkbird ITC-308, kontrollur tat-temperatura b'output ta' relay doppju plug-and-play. Jiddeskrivi l-ispeċifikazzjonijiet, l-operazzjonijiet ewlenin, is-settings tal-menu, id-deskrizzjonijiet tal-iżbalji, u l-informazzjoni dwar il-garanzija għal diversi applikazzjonijiet bħal home-brew, akkwarji, u inkubazzjoni.
	INKBIRD ITC-306A Smart Wi-Fi Temperature Controller for Aquarium - User Manual Comprehensive user manual for the INKBIRD ITC-306A Smart Wi-Fi Temperature Controller, detailing features, setup, operation, troubleshooting, and technical specifications for aquarium use. Learn how to connect via Wi-Fi, set temperature controls, and manage alarms.
	Manwal tal-Utent tal-Kontrollur tat-Temperatura Plug and Play tal-Inkbird ITC-308 Manwal komprensiv għall-utent għall-Kontrollur tat-Temperatura Plug and Play Inkbird ITC-308. Ikopri l-prodott fuqview, speċifikazzjonijiet dettaljati, funzjonijiet ewlenin, struzzjonijiet operattivi, settings tal-menù, kodiċijiet ta' żbalji, u informazzjoni dwar il-garanzija.
	Manwal tal-Utent tal-Kontrollur tat-Temperatura INKBIRD ITC-308-WIFI Manwal komprensiv għall-utent għall-kontrollur tat-temperatura INKBIRD ITC-308-WIFI li jaħdem bil-Wi-Fi, li jkopri s-setup, it-tħaddim, l-ispeċifikazzjonijiet, il-konformità mal-FCC, u s-soluzzjoni tal-problemi.
	INKBIRD IHC-200 Humidity Controller User Manual This manual provides detailed instructions for the INKBIRD IHC-200 Plug-n-Play Humidity Controller, covering its specifications, button functions, operation, settings, error descriptions, and warranty information.