RL LIVE YOUR LIGHT Davos R81553006 3-Bulb Spotlight Bar Instruction Manual

1. Introduzzjoni

This manual provides essential information for the safe installation, operation, and maintenance of your RL LIVE YOUR LIGHT Davos R81553006 3-Bulb Spotlight Bar. Please read these instructions carefully before proceeding with installation or use, and retain them for future reference.

The Davos spotlight bar features a metal chrome finish with three fabric shades in white and grey. It is designed for use with E14 bulbs, with a recommended maximum of 10 watts per bulb. Bulbs are not included with this product.

2. Istruzzjonijiet tas-Sigurtà

• Always disconnect the power supply at the main fuse box or circuit breaker before installation, maintenance, or bulb replacement.
• L-installazzjoni għandha titwettaq minn elettriċista kwalifikat jekk m'intix ċert dwar il-wajers elettriċi.
• Kun żgur li l-wiċċ tal-immuntar jista' jsostni l-piż tal-apparat.
• Taqbiżx il-wat massimutage specified for the bulbs (3 x E14 max. 10 watts).
• Żomm il-materjali tal-ippakkjar fejn ma jintlaħaqx mit-tfal.
• Do not cover the light fixture with any material.
• Dan il-prodott huwa għal użu fuq ġewwa biss.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti u mhux imħassra qabel tibda l-installazzjoni:

• 1 x RL LIVE YOUR LIGHT Davos R81553006 3-Bulb Spotlight Bar (including metal bar, base, and 3 fabric shades)
• Ħardwer tal-immuntar (viti, tappijiet tal-ħajt)
• Manwal ta' Istruzzjoni

Nota: Light bulbs (3 x E14) are not included and must be purchased separately.

4. Setup u Installazzjoni

Before installation, ensure the power supply is disconnected at the main circuit breaker.

Għodod Meħtieġa (Mhux Inklużi):

• Tornavit (ras Phillips)
• Drill (if mounting to a new location)
• Lapes
• Wire strippers (if necessary)

Passi ta' Installazzjoni:

1. Ipprepara l-Wiċċ tal-Immuntar: Identify the desired location for the spotlight bar. Ensure there is adequate wiring available and that the surface is suitable for mounting.
2. Immarka l-Punti tat-Tħaffir: Hold the mounting bracket of the spotlight bar against the ceiling or wall and mark the positions for drilling holes with a pencil. Refer to the dimension diagram for precise measurements.
3. Drill toqob: Drill holes at the marked positions. Insert appropriate wall plugs if mounting into drywall or masonry.
4. Qabbad il-Wiring: Carefully connect the household electrical wires to the corresponding wires on the spotlight bar. Ensure correct polarity (Live to Live, Neutral to Neutral, Earth to Earth). Secure connections with terminal blocks.
5. Immonta l-Apparat: Secure the spotlight bar's mounting bracket to the ceiling or wall using the provided screws. Ensure it is firmly attached.
6. Installa Basal: Screw three E14 bulbs (max. 10W LED recommended) into the lamp holders. Do not overtighten.
7. Aġġusta l-Spotlights: The individual spotlights can be adjusted to direct light as desired.
8. Irrestawra l-Enerġija: Ladarba l-installazzjoni tkun tlestiet u l-konnessjonijiet kollha jkunu siguri, erġa' daħħal l-enerġija fis-circuit breaker prinċipali.

5. Istruzzjonijiet Operattivi

The RL LIVE YOUR LIGHT Davos R81553006 Spotlight Bar is operated via a standard wall switch connected to your household electrical circuit. There is no integrated switch on the fixture itself.

• Tixgħel/Jitfi: Uża s-swiċċ tal-ħajt biex tixgħel jew titfi l-apparat tad-dawl.
• Aġġustament tal-Spotlights: Each individual spotlight head can be manually rotated and tilted to direct the light beam to your desired area.

6. Manutenzjoni

Tindif:

• Dejjem skonnettja l-enerġija qabel it-tindif.
• Imsaħ il-partijiet tal-metall b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• For the fabric shades, gently dust with a soft brush or a dry cloth. Avoid using wet cloths or harsh chemicals, which may damage the fabric.

Sostituzzjoni tal-bozza:

• Ensure the fixture is turned off and has cooled down completely before attempting to replace bulbs.
• Ħoll il-bozza E14 il-qadima bir-reqqa.
• Screw in a new E14 bulb, ensuring it does not exceed the maximum wattage of 10 watts. LED bulbs are recommended for energy efficiency.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For information regarding warranty coverage or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.