Delta Bike Hoist Pro

Manwal tal-Istruzzjonijiet Delta Bike Hoist Pro b'Ċineg tal-Kayak (Pakkett ta' 2)

Model: Bike Hoist Pro

Ditta: Delta

Introduzzjoni

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Delta Bike Hoist Pro with Kayak Straps (2-Pack). This heavy-duty ceiling storage system is designed to elevate and secure various items, including road, commuter, and mountain bikes, kayaks, and ladders, up to 100 lbs. The pre-assembled design simplifies installation, featuring sliding pulleys for a custom fit and an auto-locking mechanism for enhanced safety.

Please read all instructions carefully before installation and use to ensure proper functionality and safety.

Setup u Installazzjoni

The Delta Bike Hoist Pro is designed for straightforward installation into ceiling joists. Ensure you have the necessary tools: a Phillips head screwdriver, a drill with a 1/8" (3mm) drill bit, and a stud locator.

  1. Locate Ceiling Joist: Use a stud finder to accurately locate the ceiling joist where the hoist rail will be mounted. Mark the center of the joist.
  2. Immarka Toqob tal-Immuntar: Hold the hoist rail against the ceiling, aligning it with the marked joist. Slide the pulleys to access all mounting holes. Use a pencil to mark the locations for the screws.
  3. Drill Pilota Toqob: Using a drill with a 1/8" (3mm) drill bit, drill pilot holes at each marked location. Ensure each hole penetrates into the ceiling joist for secure mounting.
  4. Mount Hoist Rail: Using the provided screws, securely mount the hoist rail into the ceiling joist. Ensure all screws are tightened.
  5. Adjust Pulleys: Slide the pulleys along the rail to the desired width to accommodate your item (bike, kayak, or ladder). Tighten the set screws on the pulleys to secure them in place.
  6. Mount Cord Cleat: Select a wall location for the cord cleat, ensuring it is at a safe height, out of reach of small children, and ideally into a wall stud. Use the two supplied wood screws to mount the cleat securely.
Vidjow: Official Delta Cycle installation instructions for the Ceiling Hoist with Straps. This video demonstrates the step-by-step process of mounting the hoist rail and cord cleat, and adjusting the pulleys.
Delta Bike Hoist Pro components laid out for installation
Immaġni: Fuqview of the Delta Bike Hoist Pro components, including the rail, pulleys, hooks, cord cleat, and mounting hardware, ready for installation.

Istruzzjonijiet Operattivi

  1. Attaching Your Item: Lower the hooks by pulling the rope. For bikes, attach one hook to the handlebars and the other to the seat or rear rack. For kayaks or ladders, use the included straps to secure the item, then attach the hooks to the straps.
  2. Raising Your Item: Pull the free end of the rope straight down in a hand-over-hand motion. The auto-locking mechanism will engage as you pull, preventing accidental drops. Continue pulling until your item reaches the desired height.
  3. Securing the Rope: Once the item is raised, pull the rope slightly to the side to ensure the auto-lock is fully engaged. Wrap any excess rope around the wall-mounted cord cleat to keep it tidy and provide an additional safety measure. DO NOT CUT EXCESS CORD.
  4. Lowering Your Item: To lower, unwrap the rope from the cleat. Stand directly underneath the two-pulley carriage on the hoist and pull the rope straight down to disengage the auto-lock. Slowly release the rope in a controlled manner to lower your item.
Vidjow: Demonstration of hoisting a bike, kayak, and ladder for ceiling storage. This video illustrates the versatility and ease of use of the hoist system for various items.
Vidjow: A user demonstrates the simple process of lowering and raising a bike using the hoist system, highlighting its smooth operation.
Diagram showing hoist features: 100 lb capacity, kayak straps, auto-locking mechanism
Immaġni: Key features of the hoist, including its 100 lb capacity, the inclusion of kayak straps for versatile use, and the integrated auto-locking mechanism for secure storage.
Red kayak suspended from the ceiling using the Delta Bike Hoist Pro with straps
Immaġni: A red kayak is shown securely hoisted to the ceiling using the Delta Bike Hoist Pro and its accompanying straps, demonstrating its capability for larger items.
Red ladder suspended from the ceiling using the Delta Bike Hoist Pro
Immaġni: A red ladder is shown suspended from the ceiling by the Delta Bike Hoist Pro, illustrating its use for storing long, bulky items.

Manutenzjoni

Issolvi l-problemi

Speċifikazzjonijiet

Dimensjonijiet tal-Pakkett tal-Oġġett L x W x H40 x 8.5 x 4.5 pulzieri
Piż tal-Pakkett4.76 Kilogrammi
Isem tad-DittaDelta
Isem tal-MudellBike Hoist for Garage
KulurGriż
MaterjalAluminju
Utenti Suġġeritiunisex-adult
ManifatturDelta Cycle & Home
StilBike Hoist Pro With Kayak Straps 2-pack
Komponenti InklużiBike Hoist for Garage
DaqsDaqs Wieħed
ASINB0CKZXN4WH
Data L-Ewwel Disponibbli13 ta’ Ottubru, 2023

Informazzjoni dwar Garanzija

The Delta Bike Hoist Pro is covered by a Garanzija Limitata tul il-Ħajja. For specific details regarding coverage and claims, please refer to the official Delta Cycle & Home websit jew ikkuntattja l-appoġġ tal-klijent.

Appoġġ għall-Klijent

For additional support, product information, or to purchase replacement parts, please visit the official Ħanut Delta.

Dokumenti Relatati - Bike Hoist Pro

Preview Parank tas-Saqaf għal Rota Waħda Delta RS2300: Gwida għall-Assemblaġġ u l-Użu
Istruzzjonijiet komprensivi tal-assemblaġġ u gwida għall-użu tad-Delta Single Bike Ceiling Hoist with Straps (Mudell RS2300). Tgħallem kif tinstalla u tħaddem il-parank tar-roti tiegħek b'mod sikur.
Preview Xtillieri tar-Roti Delta: Istruzzjonijiet tal-Immuntar għal Stands għal Żewġ Roti u għal Erba' Roti
Istruzzjonijiet komprensivi għall-assemblaġġ u linji gwida dwar is-sigurtà għal Two Bike Gravity Stand u Four Bike Free-Standing Racks ta' Delta. Jinkludi listi tal-partijiet, għodda meħtieġa, u twissijiet importanti dwar l-użu.
Preview Istruzzjonijiet tal-Assemblaġġ tal-Stand Robust Upright għal Żewġ Roti Delta HDRS6200
Istruzzjonijiet tal-assemblaġġ pass pass u gwida tal-aġġustament għad-Delta HDRS6200 Two Bike Rugged Upright Stand. Tgħallem kif tiġbor u tuża l-istand tar-roti tiegħek b'mod sigur.
Preview Istruzzjonijiet tal-Assemblaġġ tal-Istand tal-Gravità tar-Roti Delta Two (RS6002/HDRS6002)
Gwida għall-assemblaġġ pass pass għad-Delta Two Bike Gravity Stand (RS6002/HDRS6002), inkluża lista tal-partijiet, għodda meħtieġa, twissijiet ta' sigurtà, u informazzjoni ta' kuntatt.
Preview Istruzzjonijiet tal-Assemblaġġ tal-Istand tal-Gravità tar-Roti Delta Two RS6100
Istruzzjonijiet tal-assemblaġġ għad-Delta Two Bike Gravity Stand (RS6100). Tgħallem kif tiġbor ir-rack tar-roti tiegħek b'passi ċari, lista tal-partijiet, u twissijiet ta' sigurtà.
Preview Istruzzjonijiet tal-Assemblaġġ tal-Istand tal-Gravità tar-Roti Delta Two (RS6100)
Istruzzjonijiet tal-assemblaġġ pass pass u linji gwida tas-sigurtà għad-Delta Two Bike Gravity Stand (Mudell RS6100), soluzzjoni robusta u aġġustabbli għall-ħażna tar-roti.