1. Introduzzjoni
This manual provides essential information for the safe operation, installation, and maintenance of your Xbeauty 23-inch Freestanding Electric Fireplace Stove. Please read all instructions carefully before use and retain this manual for future reference.

Figura 1: Quddiem view of the Xbeauty Electric Fireplace Stove, showcasing its design and flame effect.
2. Istruzzjonijiet Importanti dwar is-Sigurtà
TWISSIJA: Biex tnaqqas ir-riskju ta’ nar, xokk elettriku, jew korriment, aqra l-istruzzjonijiet kollha qabel tuża dan l-apparat.
- Kun żgur li l-volum tas-sokket tal-enerġijatage matches the appliance's rating.
- Tħaddimx il-nar b'korda jew plagg bil-ħsara.
- Żomm materjali kombustibbli mill-inqas 3 piedi (0.9 metri) 'il bogħod minn quddiem in-nar.
- Daħħalx jew tħallix oġġetti barranin f'xi fetħa tal-ventilazzjoni jew tal-egżost.
- Always unplug the fireplace when not in use or before cleaning.
- This appliance is equipped with an overheating protection device that automatically shuts off the heater if it overheats. If this occurs, unplug the unit and allow it to cool for 15 minutes before restarting.

Figure 2: The fireplace operates quietly and includes an overheat protection device for safety.
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti qabel l-assemblaġġ:
- Electric Fireplace Stove Unit (1)
- Saqajn (4)
- Mounting Screws for Legs (Quantity as specified in hardware pack)
- Manwal għall-Utent (1)
4. Assemblaġġ u Installazzjoni
The Xbeauty Electric Fireplace Stove is designed for freestanding use. Minimal assembly is required.
- Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ.
- Place the main fireplace unit upside down on a soft, non-abrasive surface to prevent scratching.
- Attach each of the four legs to the designated mounting points on the bottom of the fireplace using the provided screws. Ensure they are securely fastened.
- Carefully turn the assembled fireplace upright and place it on a stable, level surface.
- Ensure the fireplace is placed away from drapes, furniture, and high-traffic areas. Maintain adequate clearance around the unit for proper ventilation.

Figura 3: Id-dimensjonijiet tal-prodott għall-konsiderazzjoni tat-tqegħid.
5. Istruzzjonijiet Operattivi
Your electric fireplace features intuitive controls for heat and flame effects.
Kontrolli Fuqview

Figure 4: Control panel for the electric fireplace.
- Heater Control Dial: Adjusts the thermostat to set the desired room temperature.
- Switch & Flame Effects: Powers the unit on/off and activates the flame effect. The flame effect can be used independently without heat.
- Heater Control-A (1000W): Activates the lower heat setting.
- Heater Control-B (1500W): Activates the higher heat setting. Can be used in conjunction with Heater Control-A for maximum heat output.
- Flame Dimmer Dial: Aġġusta l-luminożità tal-effett tal-fjamma.
Using the Fireplace
- Ipplaggja l-korda tad-dawl fi żbokk ertjat ta’ 120V AC.
- Press the 'Switch & Flame Effects' button to turn on the unit and activate the flame effect.
- To activate heating, select the desired heat level using 'Heater Control-A' (1000W) or 'Heater Control-B' (1500W). For maximum heat, activate both.
- Adjust the 'Heater Control Dial' to set your preferred temperature. The heater will cycle on and off to maintain this temperature.
- Use the 'Flame Dimmer Dial' to adjust the intensity of the flame effect.
- To turn off, first switch off the heater controls, then press the 'Switch & Flame Effects' button. Unplug the unit when not in use.

Figure 5: Realistic flame effect and independent flame operation.
6. Kura u Manutenzjoni
Regular cleaning and proper care will ensure the longevity and optimal performance of your fireplace.
- Dejjem aqla l-apparat qabel tnaddaf.
- Imsaħ l-uċuħ ta 'barra b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
- Periodically check the air intake and exhaust vents for dust or obstructions. Use a vacuum cleaner with a brush attachment to remove any debris.
- The flame effect uses LED lights which do not require replacement.
- Store the fireplace in a dry, cool place when not in use.
7 Issolvi l-problemi
Irreferi għat-tabella t'hawn taħt għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda enerġija/L-unità ma tixgħelx | Not plugged in; Power outlet issue; Circuit breaker tripped | Ensure plug is fully inserted; Test outlet with another device; Reset circuit breaker |
| Ebda output tas-sħana | Heater controls not activated; Thermostat set too low; Overheat protection activated | Activate heater switches; Increase thermostat setting; Unplug and allow to cool for 15 minutes |
| L-effett tal-fjamma ma jaħdimx | Unit not powered on; Flame effect switch off | Ensure unit is powered on; Press 'Switch & Flame Effects' button |
| Ħoss mhux tas-soltu | Fan obstruction; Loose component | Unplug and check for obstructions in vents; Contact customer support if noise persists |
8. Speċifikazzjonijiet tal-Prodott
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Xbieħ |
| Isem tal-Mudell | YH-2211 |
| Dimensjonijiet tal-Prodott | 11.02"D x 22.83"W x 20.08"H |
| Sors tal-Enerġija | Corded Elettriku |
| Output tas-Sħana | 1000W / 1500W |
| Kopertura tat-Tisħin | 400-500 pied kwadru |
| Materjal | Stainless Steel |
| Tip ta' Installazzjoni | Freestanding |
| Karatteristika Speċjali | Adjustable Thermostat, Overheating Protection, 3D Flame Effect |
| Piż tal-oġġett | 23.4 liri |
9. Garanzija u Appoġġ għall-Klijent
Xbeauty products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues or have questions regarding your electric fireplace, please contact Xbeauty customer support through the retailer's platform or the official Xbeauty websit għall-għajnuna.
Għal aktar informazzjoni jew appoġġ, jekk jogħġbok żur il- Xbeauty Store on Amazon.





