Lanzar VIBE452N.6 6000 Watt 4-Channel Car Audio AmpManwal ta' Istruzzjoni lifier

Introduzzjoni

Thank you for choosing the Lanzar VIBE452N.6 4-Channel Car Audio Amplifier. Dan il-manwal jipprovdi struzzjonijiet dettaljati għall-installazzjoni, it-tħaddim u l-manutenzjoni xierqa tal- ampLififier. Jekk jogħġbok aqra dan il-manwal bir-reqqa qabel ma tipprova tinstallah jew tħaddemh biex tiżgura prestazzjoni u sigurtà ottimali.

Informazzjoni Importanti dwar is-Sigurtà

Always disconnect the vehicle's battery negative terminal before starting any installation.
Kun żgur li l-wajers kollha huma mgħoddija u mwaħħlin sew biex tevita ħsara jew short circuits.
Use appropriate gauge wiring for power and ground connections to handle the amplifier's current draw.
Immonta l- ampŻomm l-alimentatur sew f'post li jippermetti ventilazzjoni adegwata u li jkun protett mill-umdità u s-sħana eċċessiva.
If you are unsure about any part of the installation process, seek assistance from a professional car audio installer.
Tħaddimx il- amplifier jekk ikun bil-ħsara jew ma jaħdimx sew.

X'hemm fil-Kaxxa

Please check the contents of your package. If any items are missing or damaged, contact your dealer immediately.

Contents of the Lanzar VIBE452N.6 amppakkett lifer

This image displays the typical contents included with the Lanzar VIBE452N.6 amplifier: il amplifier unit, a remote subwoofer level control, connection cables, and mounting screws.

Lanzar VIBE452N.6 4-Channel Ampaktar ħaj
Kontroll tal-Bass tas-Subwoofer mill-Bogħod
Gwida Quick Start
Viti tal-Immuntar
Connection Cables (as pictured)

Karatteristiċi tal-Prodott

The Lanzar VIBE452N.6 amplifier is engineered with advanced features for high-quality car audio performance:

Ħruġ ta' Enerġija Għolja: Delivers 4 x 1250 Watts RMS @ 4 Ohms, 4 x 1500 Watts Max @ 4 Ohms, 2 x 3000 Watts Max @ 4 Ohms Bridged, and 4 x 2000 Watts @ 2 Ohms RMS.
Provvista tal-Enerġija MOSFET: Features a regulated PWM-type power supply that automatically maintains rated power across varying battery voltages.
Variable Input Level Controls: Independent controls for each pair of channels allow precise gain matching.
Variable Crossover Controls: High-Pass and Low-Pass crossover controls for precise audio frequency management.
High-Efficiency Heatsink: Heavy aluminum heatsink design ensures efficient heat dissipation for stable operation.
This image highlights the robust aluminum heatsink, designed for efficient thermal management of the ampaktar ħaj.
Remote Subwoofer Bass Control: Allows convenient adjustment of subwoofer bass levels from the driver's seat.
This image shows the remote bass control knob, which allows users to adjust the bass boost from 0 to 18 dB at 60 Hz.
Electronic Crossover Network: Integrated crossover for precise frequency distribution.
Bass Boost Circuit: Enhances low-frequency output.
Bridgeable at 4 Ohms: Offers flexibility for various speaker configurations.
2 Ohm Stereo Stable: Ensures compatibility with a wide range of speakers.
Tri-Mode Capable: Supports simultaneous stereo and mono operation.
Silver RCA Inputs and Line Outs: High-quality connectors for signal integrity and multi-ampsetups ta' lifier.
Power Protection LED Indicators: Visual indicators for operational status and protection modes.
Advanced Protection Circuitry: Jissalvagwardja l- amplifier from overload, short circuits, and thermal issues.
Soft Turn On/Off: Prevents pops and thumps during power cycling.

Setup u Installazzjoni

Installazzjoni xierqa hija kruċjali għall-prestazzjoni u l-lonġevità tiegħek amplifier. Segwi dawn il-passi bir-reqqa.

1. Immuntar tal- Ampaktar ħaj

Choose a mounting location that is dry, well-ventilated, and secure. Ensure there is enough space around the amplifier for air circulation, especially around the heatsink. Avoid mounting it directly on carpet or in enclosed spaces without airflow.

Lanzar VIBE452N.6 ampdimensjonijiet aktar ħajjin

This image illustrates the dimensions of the Lanzar VIBE452N.6 amplifier: 20.47 inches in length, 10.25 inches in width, and 2.36 inches in height. These measurements are important for planning the installation location.

Immarka t-toqob tal-immuntar billi tuża l- amplifier bħala mudell.
Drill toqob pilota jekk meħtieġ.
Sikura l- amplifier bl-użu tal-viti tal-immuntar provduti.

2. Power and Ground Connections

These connections are critical for amplifier performance and safety. Use appropriate gauge wiring (e.g., 4-gauge for power and ground) and ensure secure, corrosion-free connections.

Qawwa (BATT+): Connect a fused power cable directly from the positive terminal of your vehicle's battery to the BATT+ terminal on the amplifier. The fuse holder should be located within 18 inches of the battery.
Art (GND): Connect a ground cable of the same gauge as the power cable to a clean, unpainted metal surface of the vehicle's chassis. Ensure a solid electrical connection.
Tixgħel mill-Bogħod (REM): Qabbad wajer ta' tixgħel mill-bogħod mill-output remot tal-unità ewlenija tiegħek mat-terminal REM fuq amplififikatur. Dan il-wajer jagħti sinjal lill- amplifer biex tixgħel u titfi bl-unità ewlenija tiegħek.

3. RCA Input Connections

Connect the RCA output cables from your head unit to the corresponding RCA input jacks on the amplifier (CH1/2 and CH3/4).

4. Konnessjonijiet tal-Ispeaker

Qabbad il-kelliema tiegħek mal- amplifier's speaker terminals. Pay close attention to polarity (+ and -). The VIBE452N.6 is a 4-channel amplifier, allowing for various configurations:

4-Channel Stereo: Connect four speakers, one to each channel output.
2-Channel Bridged: Bridge two channels to power two subwoofers or high-power speakers. Refer to the amplifier's terminal markings for bridged connections.
Tri-Mode: A combination of stereo and bridged modes.

Ensure the total impedance of your speakers matches the amplifier's capabilities (2 Ohm stereo stable, 4 Ohm bridged stable).

Lanzar VIBE452N.6 amplifier installed in a car trunk with subwoofers

This image shows the Lanzar VIBE452N.6 amplifier installed in a vehicle's trunk, connected to subwoofers, demonstrating a typical installation scenario.

5. Remote Subwoofer Bass Control Connection

Connect the remote bass control module to the designated "REMOTE" port on the amplifier. Mount the control module in a convenient location for easy access.

Istruzzjonijiet Operattivi

1. L-Inizjali Tixgħel

Wara li jsiru l-konnessjonijiet kollha, erġa' qabbad il-batterija tal-vettura. Ixgħel l-unità ewlenija tiegħek. Il- amplifier's power indicator LED should illuminate, indicating it is receiving power and is operational.

2. Setting Input Level (Gain)

The input level controls (GAIN) match the amplifier's input sensitivity to the output of your head unit. Incorrect gain settings can lead to distortion or reduced dynamic range.

Ibda bil- amplifier's gain controls set to minimum.
Set your head unit's volume to about 75-80% of its maximum.
Żid bil-mod il- amplifier's gain control until you hear slight distortion, then back it off slightly.
Repeat for all channels.

3. Crossover Adjustment (HIGH/LOW PASS)

The variable high-pass and low-pass crossovers allow you to direct specific frequency ranges to your speakers or subwoofers.

Filtru High-Pass (HPF): Used for full-range speakers to block low frequencies that they cannot reproduce effectively, preventing distortion and improving clarity. Adjust the HPF frequency to suit your speakers.
Filtru Low-Pass (LPF): Used for subwoofers to block high frequencies, ensuring they only reproduce bass. Adjust the LPF frequency to blend smoothly with your full-range speakers.

4. Kontroll tal-Bass Boost

The bass boost circuit provides additional low-frequency enhancement. Use this feature sparingly to avoid distortion and potential speaker damage. The remote bass control allows for convenient adjustment.

5. Bridged Mode Operation

When operating in bridged mode, ensure the connected speaker or subwoofer has an impedance of 4 Ohms or higher. Refer to the wiring diagram in the Quick Start Guide for correct connections.

Manutenzjoni

Tindif: Imsaħ perjodikament il- ampNaddaf il-barra tal-lifer b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
Ventilazzjoni: Ensure the heatsink fins remain clear of dust and debris to maintain proper cooling.
Konnessjonijiet: Periodically check all power, ground, RCA, and speaker connections for tightness and corrosion. Loose connections can cause performance issues or damage.
Sostituzzjoni tal-fjus: If a fuse blows, replace it only with a fuse of the same type and rating (30A x 3). Using an incorrect fuse can cause serious damage or fire.

Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Bla Qawwa / Amplifier ma jixgħelx	Fjus minfuħ Konnessjoni maħlula tal-enerġija jew tal-art L-ebda sinjal ta' mixgħul mill-bogħod	Check and replace fuses (30A x 3) Verify all power and ground connections are secure Check remote wire connection from head unit
Ebda Output tal-Ħoss	RCA cables disconnected or damaged Il-wajers tal-ispikers skonnettjati jew shorted Il-qligħ issettjat baxx wisq Head unit output issues	Check RCA connections and cables Verify speaker wire connections and check for shorts Żid l-issettjar tal-qligħ Test head unit with another amplifier jew kelliema
Ħoss Mgħawġ	Il-qligħ issettjat għoli wisq Impedenza tal-ispiker baxxa wisq Konnessjoni ħażina mal-art Is-settings tal-crossover mhumiex korretti	Naqqas l-issettjar tal-qligħ Ivverifika li l-impedenza tal-ispiker hija fi ħdan amplifier's limits Ensure a solid ground connection Adjust HPF/LPF settings
Amplifier Overheats / Goes into Protection Mode	Ventilazzjoni insuffiċjenti Impedenza tal-ispiker baxxa wisq Ħtija interna	Ittejjeb il-ventilazzjoni madwar ampaktar ħaj Iċċekkja l-impedenza tal-kelliem If problem persists, seek professional service

Speċifikazzjonijiet

Karatteristika	Speċifikazzjoni
Qawwa RMS @ 4 Ohms	4 x 1250 Watts
Qawwa Massima @ 4 Ohms	4 x 1500 Watts
Max Power @ 4 Ohms Bridged	2 x 3000 Watts
Qawwa RMS @ 2 Ohms	4 x 2000 Watts
Tip ta 'Provvista ta' Enerġija	MOSFET PWM-Type
Rispons ta' Frekwenza	10Hz-40KHz
Proporzjon tas-sinjal għall-istorbju (S/N)	95dB
Fjus Rating	30A x 3
Dimensjonijiet (W x H x L)	10.25'' x 2.36'' x 20.47''
Piż tal-oġġett	13.97 liri
Numru tal-Mudell	VIBE452N.6
Manifattur	Dana Trading

Garanzija u Appoġġ

For warranty information or technical support, please refer to the contact details provided in your Quick Start Guide or visit the official Lanzar websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

	Lanzar HeritagMosfet Mono-Blokk tas-Serje e HTG138 u HTG158 AmpManwal ta 'l-Utent aktar ħaj Manwal tal-utent għal Lanzar HeritagAwdjo tal-karozza mosfet mono-block tas-Serje e HTG138 u HTG158 amplifiers. Jipprovdi informazzjoni dettaljata dwar l-installazzjoni, il-wajers, il-funzjonijiet ta' kontroll, is-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet tekniċi għal dawn is-sistemi awdjo tal-karozzi ta' prestazzjoni għolja ampliifikaturi.
	Lanzar Vibe AmpGwida għall-Utent tal-Lifiers: Karatteristiċi, Speċifikazzjonijiet, u Installazzjoni Din il-gwida għall-utent tipprovdi informazzjoni komprensiva dwar is-serje Lanzar Vibe ampmodifikaturi, inklużi karatteristiċi dettaljati, speċifikazzjonijiet tekniċi, proċeduri ta' installazzjoni, deskrizzjonijiet ta' kontroll, dijagrammi tal-wajers tas-sistema, pariri għas-soluzzjoni tal-problemi, u pariri dwar it-tindif/ħażna. Mudelli koperti: VIBE1100N, VIBE1400N, VIBE2102N, VIBE442N, VIBE452N, VIBE452N.6.
	Lanzar HTG Serje MOSFET Car Audio AmpManwal tal-Utent tal-Lifers Manwal komprensiv għall-utent għall-awdjo tal-karozza MOSFET tas-serje Lanzar HTG amplifers, li jkopru l-installazzjoni, it-tħaddim, is-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet għall-mudelli HTG 888, HTG 258BT, HTG 448BT, HTG 558BT, u HTG 668BT.
	Gwida għall-Utent ta' Lanzar VBE420P: Ekwalizzatur Parametriku ta' 4 Bandi b'Kontroll tas-Subwoofer Gwida komprensiva għall-utent għall-Ekwilizzatur Parametriku ta' 4 Bandi Lanzar VBE420P. Tgħallem dwar l-installazzjoni, it-tħaddim, il-kontrolli, il-karatteristiċi, u l-ispeċifikazzjonijiet tekniċi għas-sistema awdjo tal-karozza tiegħek.
	Serje Lanzar VECTOR Amplifier Manwal tas-Sid Dan il-manwal tas-sid jipprovdi informazzjoni dettaljata dwar il-karatteristiċi, l-ispeċifikazzjonijiet, l-installazzjoni, u s-soluzzjoni tal-problemi għall-awdjo tal-karozza tas-serje Lanzar VECTOR. amplifikaturi, inklużi l-mudelli VCT-2010, VCT-2610, VCT-4110, VCT-1500D, u VCT-3000D.
	Karozza tas-Serje Lanzar VECTOR AmpManwal tas-Sid tal-lifiers Manwal komprensiv tas-sid għall-karozza tas-serje Lanzar VECTOR amplifiers (VCT-2110, VCT-2210, VCT-2310, VCT-2410, VCT-2510), li jkopru l-karatteristiċi, l-ispeċifikazzjonijiet, l-installazzjoni, il-konnessjonijiet, u s-soluzzjoni tal-problemi.