1. Introduzzjoni
The Zalman P30 is a spacious Micro-ATX computer chassis designed to accommodate both Micro-ATX and Mini-ITX motherboards. It features panoramic frameless tempered glass panels for an unobstructed view of your internal components and comes with three pre-installed 120mm Addressable RGB fans for enhanced cooling and aesthetics. This manual provides essential information for the proper assembly, operation, and maintenance of your P30 case.
Figure 1: The Zalman P30 Micro-ATX Case showcasing its panoramic tempered glass and internal components with RGB lighting.
2. Informazzjoni dwar is-Sigurtà
- Dejjem skonnettja l-provvista tal-enerġija mis-sokit tal-ħajt qabel ma twettaq kwalunkwe installazzjoni jew manutenzjoni.
- Handle tempered glass panels with care to prevent breakage. Avoid impacts or dropping the panels.
- Wear an anti-static wrist strap or frequently touch a grounded metal object to prevent electrostatic discharge (ESD) when handling internal components.
- Be cautious of sharp edges inside the chassis during installation.
- Keep the case and its components away from liquids and excessive humidity.
3. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha elenkati huma inklużi fil-pakkett tiegħek:
- Zalman P30 Micro-ATX Case
- 3 x 120mm Addressable RGB Fans (pre-installed)
- Accessory Box (containing various screws, anti-vibration rings, cable ties, etc.)
- Manwal għall-Utent (dan id-dokument)
4. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Zalman |
| Isem tal-Mudell | P30 |
| Tip ta' Każ | Mini-Torri |
| Kompatibbiltà tal-motherboard | Mikro-ATX, Mini-ITX |
| Dimensjonijiet tal-Prodott (LxWxH) | 17.12 x 9.25 x 16.89 pulzieri |
| Piż tal-oġġett | 26.2 liri |
| Materjal | Azzar illigat, Plastik, Ħġieġ ittemprat |
| Fannijiet installati minn qabel | 3 x 120mm ARGB (2x Side Intake, 1x Rear Exhaust) |
| Portijiet I / O ta 'quddiem | 1x USB-C, 1x USB 3.0, 1x Stereo/Mic 3.5mm AUX, Power Button w/ LED |
| Max CPU Cooler Għoli | 173mm |
| Max GPU Tul | 420mm |
| Appoġġ tar-Radjatur (Fuq) | Sa 360mm |
| Tip ta' Immuntar tal-Provvista tal-Enerġija | Mount tal-qiegħ |
Figure 2: Detailed dimensions of the Zalman P30 chassis.
5. Setup
5.1. Installazzjoni tal-Motherboard
The Zalman P30 supports Micro-ATX and Mini-ITX motherboards. Ensure your motherboard's form factor is compatible before proceeding.
- Remove the tempered glass side panel by gently pulling it open.
- Install the necessary motherboard standoffs. The case comes with pre-installed standoffs, and additional ones are provided in the accessory box if needed.
- Poġġi l-motherboard tiegħek bir-reqqa fuq l-istandoffs, billi tallinja t-toqob tal-viti.
- Waħħal il-motherboard bil-viti pprovduti.
Figure 3: Motherboard compatibility for the P30 case.
5.2. Installazzjoni ta 'Provvista ta' Enerġija
The power supply unit (PSU) is mounted at the bottom of the case.
- Żerżaq il-PSU fil-kompartiment apposta għalih fil-qiegħ ta' wara tal-kaxxa.
- Secure the PSU using the screws provided in the accessory box.
- Connect the necessary power cables to your motherboard and other components.
5.3. Installazzjoni ta' Apparat tal-Ħażna
Il-kaxxa tappoġġja SSDs ta' 2.5" u HDDs ta' 3.5".
- Locate the storage drive bays/mounts within the chassis.
- Mount your 2.5" SSDs or 3.5" HDDs using the appropriate screws and anti-vibration rings from the accessory box.
5.4. Installazzjoni tal-Kard Grafika
The Zalman P30 supports graphics cards up to 420mm in length.
- Neħħi l-għata meħtieġa tas-slott tal-PCIe minn wara tal-kaxxa.
- Insert your graphics card into the primary PCIe slot on your motherboard.
- Waħħal il-karta grafika bil-viti.
- Utilize the pre-installed anti-sag bracket to support heavier graphics cards. Adjust its position and height as needed.
5.5. Installazzjoni tal-Fann u r-Radjatur
The case comes with three pre-installed 120mm ARGB fans. Additional cooling options are available:
- Fuq: Jappoġġja radjaturi sa 360mm jew 3x 120mm / 2x 140mm.
- In-naħa: Supports 2x 120mm fans (pre-installed as intake).
- Wara: Supports 1x 120mm fan (pre-installed as exhaust).
- Qiegħed: Supports 3x 120mm / 2x 140mm fans.
Figura 4: Aktarview of fan specifications and pre-installed ARGB fans.
5.6. Ġestjoni tal-Kejbil
The Zalman P30 features enhanced cable organization to maintain a clean build.
- Route all cables through the designated cutouts and rubber grommets behind the motherboard tray.
- Use the included cable ties to bundle and secure cables, preventing interference with airflow and maintaining a tidy interior.
Figure 5: Cable management features of the P30 case.
6. Istruzzjonijiet Operattivi
After completing the assembly, ensure all connections are secure before powering on your system.
- Power On/Off: Use the power button located on the front I/O panel.
- Kontroll tal-ARGB: The pre-installed ARGB fans can be customized via a 3-pin header connection to your motherboard's ARGB header. Use your motherboard's software to control lighting effects.
- I/O ta' quddiem: Connect peripherals to the USB-C, USB 3.0, and 3.5mm audio jacks on the front panel.
Figure 6: Front I/O panel details.
7. Manutenzjoni
Manutenzjoni regolari tgħin biex tiżgura prestazzjoni ottimali u lonġevità tal-komponenti tal-PC tiegħek.
- Filtri tat-Trab: The case features magnetic dust filters on the top and bottom panels. Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup.
- Tneħħija tal-Panew: The panoramic tempered glass front and side panels are tool-less and easily removable for cleaning and access to internal components.
Figure 7: Instructions for removing top panel and bottom dust filter.
8 Issolvi l-problemi
Jekk tiltaqa' ma' problemi, ikkunsidra l-passi komuni li ġejjin għas-soluzzjoni tal-problemi:
- Ebda Qawwa: Ensure the PSU is properly connected to the wall outlet and the motherboard. Check the PSU's on/off switch.
- Ebda Display: Verify that the graphics card is correctly seated in its PCIe slot and connected to the monitor. Check all power connections to the GPU.
- Fan/RGB Issues: Confirm that all fans and ARGB cables are securely connected to the motherboard or a dedicated controller. Check motherboard software for ARGB settings.
- Is-sħana żejda: Ensure all fans are spinning correctly and dust filters are clean. Verify proper CPU cooler installation.
9. Vidjo tal-Prodott
Vidjo 1: Il-prodott uffiċjali spiċċaview of the Zalman P30 Spacious Mini Tower Gaming PC Case, demonstrating its features and design.
10. Garanzija u Appoġġ
Zalman products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official Zalman websit għal termini u kundizzjonijiet dettaljati tal-garanzija.
For technical support or customer service, please contact Zalman customer support through their official channels. Contact information can typically be found on the Zalman webis-sit jew fid-dokumentazzjoni tal-prodott tiegħek.
