1. Introduzzjoni
This manual provides detailed instructions for the assembly, operation, and maintenance of your Barska Winbest Pursuit-200 Metal Detector Field Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Pursuit-200 Metal Detector Field Kit is designed for detecting various metals and includes a main metal detector with an LCD display, a handheld wand detector, headphones, a folding shovel, and a soft carrying case.
2. Kontenut tal-Pakkett
Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:
- Barska Winbest Pursuit-200 Metal Detector (Main Unit)
- Surveyor-100 Handheld Wand Metal Detector
- Headphones
- Folding Shovel with Compass
- Każ tal-Ġarr Artab
- Manwal għall-Utent (dan id-dokument)
Stampa 2.1: All components of the Barska Winbest Pursuit-200 Metal Detector Field Kit, including the main detector, wand detector, headphones, shovel, and carrying case.
3. Setup
3.1. Assembling the Main Metal Detector
- Waħħal il-Kojl tat-Tiftix: Secure the search coil to the lower stem using the provided bolt and nut. Ensure it is firmly attached but allows for slight angle adjustment.
- Connect the Lower and Middle Stems: Insert the lower stem into the middle stem and secure it with the spring clip or locking mechanism.
- Attach the Control Housing: Slide the control housing onto the upper stem. Adjust the armrest for comfort and secure the control housing in place.
- Wrap the Cable: Carefully wrap the search coil cable around the stem, ensuring it is not too tight or loose, and plug the connector into the control housing.
- Installa Batteriji: Open the battery compartment on the control housing and insert the required batteries (refer to specifications for battery type).
Stampa 3.1: The main metal detector fully assembled, showing the search coil, stem, armrest, and control housing.
3.2. Preparing the Wand Detector
The Surveyor-100 Wand Metal Detector typically requires battery installation. Open the battery compartment, insert the correct batteries, and close the compartment securely.
Stampa 3.2: The handheld wand metal detector, showing its compact design and control buttons.
3.3. Preparing the Folding Shovel
Unfold the shovel and secure its locking mechanisms to ensure it is rigid for use. The shovel can be configured as a shovel or a pick. The compass is integrated into the handle.
Stampa 3.3: The multi-use folding shovel, shown in both shovel and pick configurations.
4. Istruzzjonijiet Operattivi
4.1. Main Metal Detector Operation
Stampa 4.1: Close-up of the Pursuit-200 metal detector's LCD display and control panel, showing buttons for DISC, NOTCH, SENS, and volume knob.
- Qawwa Mixgħul: Turn the VOLUME knob clockwise to power on the detector.
- Adjust Sensitivity (SENS): Press the SENS button and use the '+' and '-' buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
- Discrimination (DISC): Press the DISC button and use '+' and '-' to set the discrimination level. This feature allows the detector to ignore certain types of metal (e.g., iron). The LCD will show the target ID.
- Talja: Use the NOTCH function to selectively eliminate specific metal categories from detection.
- Headphones: Plug the included headphones into the 'PHONE' jack for private listening and clearer audio signals.
- Knis: Hold the detector with the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping arcs.
- Target Indication: When a metal object is detected, the detector will emit an audible tone, and the LCD display will show a target ID and signal strength.
- Kojl tat-Tiftix li ma jgħaddix ilma minnu: The 10-inch search coil is weather-sealed and can be submerged in shallow water for detection. Ensure the control housing is not submerged.
4.2. Wand Detector Operation
Stampa 4.2: A hand holding the Surveyor-100 wand detector, demonstrating its ergonomic design for pinpointing targets.
- Qawwa Mixgħul: Press the Power ON/OFF button to activate the wand detector.
- Identifikazzjoni: After locating a general area with the main detector, use the wand detector to precisely pinpoint the target's location in the soil.
- Indikazzjoni: The wand detector will typically use audible alerts and/or vibration, along with LED indicators, to signal the presence of metal.
4.3. Shovel Usage
Use the folding shovel to excavate detected targets. Its compact design and pick function are useful for breaking up tough ground. The integrated compass can assist with navigation.
5. Manutenzjoni
- Tindif: Wipe down the detector and accessories with a damp drapp wara kull użu. Evita prodotti tat-tindif li joborxu.
- Ħażna: Store the kit in the provided soft carrying case in a dry, cool place when not in use.
- Kura tal-batterija: Remove batteries from both detectors if they will not be used for an extended period to prevent leakage.
- Spezzjoni tal-Cable: Regularly check the search coil cable for any signs of wear or damage.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No power to main detector/wand detector | Batteriji mejta jew installati ħażin | Ibdel il-batteriji b'oħrajn ġodda, waqt li tiżgura l-polarità korretta. |
| Sinjali erratiċi jew pożittivi foloz | High sensitivity, electromagnetic interference, mineralized ground | Reduce sensitivity. Move away from power lines or other electronic devices. Use discrimination settings. |
| Detector not finding metal | Low sensitivity, incorrect discrimination settings, search coil not parallel to ground | Increase sensitivity. Adjust discrimination settings. Ensure search coil is swept correctly. |
| L-ebda ħoss mill-headphones | Headphones not plugged in correctly, volume too low, faulty headphones | Ensure headphones are fully plugged in. Increase volume. Test with another pair of headphones if available. |
7. Speċifikazzjonijiet
- Mudell: Pursuit-200 (BE12748)
- Ditta: Barska
- Search Coil Size: 10 inches (Waterproof)
- Wiri: LCD
- Sors tal-Enerġija: Battery Powered (Batteries Required: Yes)
- Tul aġġustabbli: Yes, up to 47 inches
- Materjal: Metall
- Piż tal-oġġett: Madwar 0.4 Kilogrammi (14.1 uqija)
- Dimensjonijiet tal-Prodott: 10"T x 9.5"W x 48.42"Għ (immuntat)
- Klassifikazzjoni tal-Protezzjoni Internazzjonali: IP541 (for search coil)
- Aċċessorji inklużi: Surveyor-100 Wand Detector, Headphones, Folding Shovel with Compass, Soft Carrying Case
8. Informazzjoni dwar is-Sigurtà
- Always obtain permission before searching on private property.
- Be aware of local regulations regarding metal detecting.
- Oqgħod attent meta tħaffer biex tevita li tagħmel ħsara lis-servizzi ta' utilità taħt l-art jew lil artefatti storiċi.
- Do not use the metal detector near live electrical wires or in hazardous environments.
- Żomm il-batteriji 'l bogħod mit-tfal u armihom kif suppost.
9. Garanzija u Appoġġ
For warranty information and customer support, please refer to the official Barska webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Barska Official Websit: www.barska.com
