SSC-LUXon NORSU Dual-Wing LED Spotlight

1. Introduzzjoni

The SSC-LUXon NORSU is a high-performance, dual-wing LED spotlight designed for outdoor wall-mounted applications. It features an integrated motion sensor and a dusk sensor, providing efficient and intelligent illumination for your garden, terrace, entrance, or garage. With its robust IP65 weather-resistant design, the NORSU spotlight ensures reliable operation in various outdoor conditions.

Karatteristiċi ewlenin:

• Bright 4000K neutral white LED illumination.
• Adjustable PIR motion sensor for precise detection.
• Integrated dusk sensor for automatic operation.
• Two independently adjustable LED spotlights for flexible light direction.
• IP65 rated for weather, dust, and water resistance.
• Durable aluminum and plastic construction.

Figure 1.1: SSC-LUXon NORSU Dual-Wing LED Spotlight. This image shows the black spotlight with its two adjustable white LED panels and the motion sensor dome at the bottom.

2. Istruzzjonijiet tas-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha tas-sigurtà bir-reqqa qabel l-installazzjoni u t-tħaddim. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment serju.

• Sigurtà Elettrika: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before installation, maintenance, or troubleshooting.
• Voltage: This product operates on 220-240 V AC 50/60 Hz. Do not connect to any other voltage.
• Klassifikazzjoni IP65: The IP65 rating ensures protection against dust ingress and low-pressure water jets from any direction. While weather-resistant, avoid submerging the unit in water or exposing it to high-pressure water jets.
• Immuntar: Mount the fixture securely on a stable surface. Ensure the mounting location can support the weight of the fixture.
• Sħana: The LED panels can become warm during operation. Do not touch the panels directly when the light is on.
• Rimi u Riċiklaġġ:

  Għal informazzjoni dwar ir-riċiklaġġ ta' dan u tipi oħra ta' lamps, please refer to local recycling guidelines. Proper disposal of electronic waste is crucial for environmental protection.

  In case of broken or damaged bulbs, exercise caution. Avoid direct contact with broken glass. For detailed instructions on how to clean and dispose of broken or damaged lamps, consult local waste management authorities or specialized recycling centers.

3. Kontenut tal-Pakkett

Iftaħ il-kaxxa bir-reqqa u kun żgur li l-oġġetti kollha huma preżenti u mhux imħassra. Jekk xi oġġetti huma neqsin jew imħassra, jekk jogħġbok ikkuntattja lill-bejjiegħ tiegħek.

• 1 x SSC-LUXon NORSU LED Spotlight with Motion Sensor
• 1 x Set of Screws and Wall Plugs
• 1 x Corner Mounting Adapter
• 1 x Cover (for motion detector detection field orientation)

Figura 3.1: Aktarview of the package contents, including the NORSU LED spotlight, corner bracket, cover, and mounting hardware (screws and wall plugs).

4. Installazzjoni

Qabel tibda l-installazzjoni, kun żgur li l-provvista ewlenija tal-enerġija tkun mitfija mis-circuit breaker biex tevita xokk elettriku.

1. Agħżel Post tal-Immuntar: Select a suitable outdoor wall location. The recommended mounting height for optimal motion detection is 1.8 - 2.5 meters (approximately 5.9 - 8.2 feet).
2. Ipprepara l-Wajers: Route the electrical wiring from the wall to the fixture's mounting point. Ensure proper sealing to maintain the IP65 rating.
3. Immuntar tal-Bażi:
   • Aqla 'l-pjanċa tal-immuntar mill-apparat.
   • Place the mounting plate against the wall at the desired height and mark the drilling points.
   • Ħaffer toqob u daħħal il-plakek tal-ħajt.
   • Secure the mounting plate to the wall using the provided screws. If mounting on a corner, use the included corner mounting adapter.
4. Konnessjoni tal-Wajer: Connect the live, neutral, and ground wires from your electrical supply to the corresponding terminals on the fixture. Ensure all connections are secure and properly insulated.
5. Waħħal l-Apparat: Secure the main body of the spotlight to the mounted plate. Ensure it clicks or screws into place firmly.
6. Adjust Spotlight Angles: The two LED panels are independently adjustable. You can swivel them up to 135° horizontally and rotate them up to 90° vertically to direct the light precisely where needed.

Figure 4.1: The NORSU spotlight mounted on an outdoor wall, demonstrating its discreet profile next to a garage door and entrance.

Figure 4.2: Detailed dimensions of the NORSU spotlight: 310mm width, 170mm height, and 170mm depth.

Figure 4.3: Illustration of the adjustable light panels, showing 135° swivel and 90° rotation capabilities for precise light direction.

5. Operation and Sensor Settings

The NORSU spotlight features an adjustable motion sensor and a dusk sensor for automated operation. Adjust the settings to suit your specific needs.

Motion Sensor (PIR) and Dusk Sensor Settings:

The sensor controls are typically located on the underside of the motion sensor dome. Use a small screwdriver to adjust the dials.

• LUX (Ambient Light Sensor): This dial controls the ambient light level at which the sensor becomes active.
  • Adjust to determine if the light should activate during day, dusk, or only at night.
  • Setting to a higher LUX value (e.g., sun icon) means the light will activate even in brighter conditions.
  • Setting to a lower LUX value (e.g., moon icon) means the light will only activate in darker conditions.
  • Adjustable range: <3-2000 LUX.
• SENS (Sensittività): This dial adjusts the sensitivity of the motion sensor.
  • Higher sensitivity means the sensor will detect smaller movements or movements at a greater distance.
  • Lower sensitivity reduces the detection range and responsiveness.
  • Detection distance: 5-10 meters (adjustable).
• TIME (Light Duration): This dial sets how long the light remains on after motion is detected and no further motion is sensed.
  • Adjustable delay time: 10 seconds (±3 seconds) to 15 minutes (±2 minutes).

Figure 5.1: Diagram illustrating the adjustment dials for the dusk sensor (LUX), sensitivity (SENS), and light duration (TIME) on the motion sensor.

Figure 5.2: Illustration of the motion sensor's detection area, showing a 240° detection angle and a range of up to 10 meters from a mounting height of 1.8-2.5 meters.

6. Manutenzjoni

The SSC-LUXon NORSU spotlight requires minimal maintenance. Regular cleaning will help maintain its appearance and performance.

• Tindif: Skonnettja l-provvista tal-enerġija qabel it-tindif. Imsaħ l-apparat b'ċarruta ratba u nadifa.amp drapp. Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti elettriċi.
• Spezzjoni: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, consult a qualified electrician.
• LEDs: The LEDs are integrated and not user-replaceable. The expected lifespan is 50,000 hours.

7 Issolvi l-problemi

If you experience issues with your SSC-LUXon NORSU spotlight, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact SSC-LUXon customer support or a qualified electrician.

8. Speċifikazzjonijiet

Figure 8.1: Energy efficiency label for the SSC-LUXon NORSU spotlight, showing class E and 40 kWh/1000h consumption. For more details, refer to the Dejtabejż EPREL.

9. Garanzija u Appoġġ

SSC-LUXon products are manufactured to high quality standards. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer.

For technical support, troubleshooting assistance, or inquiries about your SSC-LUXon NORSU spotlight, please contact SSC-LUXon customer service through their official websit jew l-informazzjoni ta’ kuntatt ipprovduta max-xiri tiegħek.

Please have your model number (NORSU 7440) and purchase details ready when contacting support.