JUJIANG PKM-C026 Automatic Single Swing Gate Opener Instruction Manual

1. Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JUJIANG PKM-C026 Automatic Single Swing Gate Opener. Please read this manual thoroughly before installation and use to ensure safe and efficient operation. This system is designed for medium-duty single swing gates up to 770 lbs in weight or 16 feet in length.

2. Informazzjoni dwar is-Sigurtà

Istruzzjonijiet Importanti dwar is-Sigurtà:

• Read and follow all warnings and instructions before installation and use.
• Ensure the gate operates smoothly and freely by hand before installing the opener.
• Żomm il-manwal għal referenza futura.
• Verifiki perjodiċi tal-opener huma meħtieġa biex jiżguraw tħaddim sikur.
• Do not allow children to play with or operate the gate opener.
• Keep hands and feet clear of the gate's path during operation.
• F'każ ta' qawwa outage, use the manual release key to operate the gate.
• This product is designed for outdoor use and is rated IP55 for water and dust resistance.

Image: Safety warning signs included with the gate opener, advising caution around moving gates.

3. Kontenut tal-Pakkett

The JUJIANG PKM-C026 Automatic Single Swing Gate Opener kit includes the following components:

• Gate Opener Actuator (1 unit)
• Control Box with Smart Chip (1 unit)
• Kontrolli mill-Bogħod (2 unitajiet)
• Mounting Hardware Set (brackets, bolts, nuts, washers)
• Manual Release Key (1 unit)
• Detailed Installation Instructions (User Manual)
• Sinjali ta' Twissija tas-Sigurtà

Immaġni: Fuqview of the JUJIANG PKM-C026 gate opener kit, including the actuator, control box, and two remote controls.

4. Speċifikazzjonijiet

Image: Diagram illustrating customizable opening options (Push-to-Open and Pull-to-Open) and a weight/length compatibility chart for gates.

5. Installazzjoni

The installation process may vary depending on your gate's condition and type. The following steps provide a general guide. Refer to the detailed user manual included in your package for specific measurements and advanced configurations.

5.1 Għodod Meħtieġa

• Power Drill
• Tape Measure
• Wrenches Open End jew Wrenches Aġġustabbli
• Strippers tal-Wajer
• Tnalji tal-qfil
• Livell
• Hacksaw or Heavy Duty Bolt Cutters (if needed for gate modification)

5.2 Kontroll ta' Qabel l-Installazzjoni

Before beginning installation, ensure your gate can open and close smoothly and freely by hand without any obstruction. The gate should not bind or drag.

5.3 Mechanical Installation Steps

1. Assemble the Rear Post Bracket and Post Pivot Bracket: Securely attach the two parts of the rear bracket using the provided bolts, washers, and nuts.
2. Assemble the Front Post Bracket and Post Pivot Bracket: Similarly, assemble the front bracket components.
3. Attach the Brackets to the Actuator Arm: Connect the assembled brackets to the gate opener actuator arm using the provided pins and clips.
4. Determine Mounting Positions:
   • Temporarily position the gate opener with the attached brackets on your gate and gate post.
   • Ensure the actuator arm is level when the gate is closed.
   • Mark the drilling points for both the front and rear brackets on the gate and post.
   • Use a level to verify the correct alignment.
5. Waħħal il-Brakketti: Drill pilot holes at the marked positions and securely fasten the brackets to the gate and gate post using appropriate bolts and hardware.
6. Connect the Actuator to the Brackets: Attach the gate opener actuator to the installed brackets using the provided pins.
7. Test Manual Operation: Release the clutch on the actuator (using the manual release key) to allow manual movement of the gate. Ensure the gate can open and close freely by hand. This confirms correct bracket positioning.

5.4 Wiring and Power Supply

The gate opener supports multiple power supply modes:

• Type 1: AC Electricity Only: Connect the control box to a 110V AC municipal electricity source.
• Type 2: AC Electricity with Backup Batteries: Connect to 110V AC and add 24V batteries (not included) for backup power.
• Type 3: Solar Panel with Batteries: Use solar panels and a solar charge controller (not included) to charge 24V batteries (not included).

Ensure all wiring connections are secure and follow the diagrams in the full user manual. Connect the actuator to the motor2 terminal if using a single gate opener. The "1" key on the remote controls motor2.

Image: Visual representation of different power supply configurations, including AC power, AC with backup batteries, and solar power with batteries.

6. Istruzzjonijiet Operattivi

6.1 Operazzjoni tal-Kontroll mill-bogħod

Your JUJIANG PKM-C026 comes with two remote controls. The remote has a maximum operating distance of up to 100 feet and can support up to 120 remotes.

• Press the designated button on the remote control to open or close the gate.
• The "1" key controls the single gate opener (motor2).

Image: A hand holding a remote control, demonstrating the automatic gate opening function from a distance.

6.2 Rilaxx manwali

F'każ ta' qawwa outage or system malfunction, you can manually operate the gate:

• Locate the manual release key slot on the actuator.
• Insert the manual release key and turn it to disengage the clutch.
• You can now open or close the gate by hand.
• To re-engage the automatic function, turn the key back and remove it.

Image: A close-up of the manual release key, used for disengaging the gate opener's clutch during power outages.

7. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your gate opener:

• Kull xahar: Check the gate's hinges and moving parts for any signs of wear or damage. Lubricate as necessary.
• Kull tliet xhur: Inspect the mounting hardware for tightness. Ensure all electrical connections are secure and free from corrosion.
• Kull sena: Test the safety stop-and-reverse feature by placing an obstruction in the gate's path during operation. The gate should stop or reverse upon contact.
• Keep the area around the gate and opener clear of debris, especially in harsh weather conditions.

Image: The gate opener installed on a gate, demonstrating its ability to function reliably in various weather conditions, including snow.

8 Issolvi l-problemi

If you encounter issues with your gate opener, refer to the following common problems and solutions:

Image: An automatic gate demonstrating its safety feature by stopping when a person walks through, highlighting obstacle detection.

9. Garanzija u Appoġġ

JUJIANG provides a 12-month warranty for this product, along with lifetime technical support. For any questions, assistance, or to claim warranty service, please contact JUJIANG customer service. They offer a 30-day worry-free exchange and return policy.

Għal aktar għajnuna, jekk jogħġbok żur il- JUJIANG Store on Amazon.