JUJIANG TKM-01 Wireless Gate Keypad Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, programming, operation, and maintenance of the JUJIANG TKM-01 Wireless Gate Keypad. This keypad is designed to provide secure digital code entry access control for JUJIANG automatic swing and sliding gate openers, as well as garage door openers.

The JUJIANG TKM-01 wireless gate keypad, featuring a touch panel and a protective cover for outdoor use.

2. Informazzjoni dwar is-Sigurtà

• Aqra l-istruzzjonijiet kollha bir-reqqa qabel l-installazzjoni u l-użu.
• Ensure the keypad is installed in a location that does not obstruct gate movement.
• Keep children away from the gate and keypad during operation.
• Do not attempt to repair the keypad yourself. Contact qualified service personnel.
• Armi l-batteriji skont ir-regolamenti lokali.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• 1 x JUJIANG TKM-01 Wireless Gate Keypad
• 8 x Batteriji AA (installati minn qabel jew inklużi separatament)
• Ħardwer tal-immuntar (viti, ankri)
• Manwal ta 'Istruzzjoni (dan id-dokument)

4. Speċifikazzjonijiet

5. Installazzjoni

The JUJIANG TKM-01 keypad is designed for outdoor installation. Choose a suitable location near your gate opener that is easily accessible but protected from direct impact.

5.1 Immuntar tat-Tastiera

1. Agħżel Post: Choose a flat, stable surface on a gate post or wall within wireless range of your gate opener's control board.
2. Immarka l-Punti tat-Tħaffir: Use the keypad's backplate as a template to mark the positions for drilling holes.
3. Drill toqob: Drill pilot holes at the marked positions. Insert wall anchors if mounting on masonry.
4. Secure Keypad: Attach the keypad securely to the surface using the provided screws.

The keypad provides convenient access control for gate openers, operating wirelessly up to 328 feet.

6. Programmazzjoni

The TKM-01 keypad must be programmed to your JUJIANG gate opener's control board to function. Ensure you have access to the control board and its 'Learn' button.

6.1 Pairing with Gate Opener

1. Enter Programming Passcode: On the keypad, enter your programming protection passcode (e.g., 8888) followed by the '*' key.
2. Enter Pairing Command: Press '5', '5', then '#'.
3. Enter Channel Command: Press '0', '1', then '#'. (Note: Channel 1 controls single gate motor 2).
4. Attiva l-Modalità tat-Tagħlim: On your JUJIANG gate opener's control board, press and release the 'Learn' button. The indicator light on the control board should illuminate or flash, indicating it is in learning mode.
5. Ikkonferma l-Imqabbad: Within a few seconds of pressing the 'Learn' button, press any key on the TKM-01 keypad. The control board's indicator light should change (e.g., turn off or flash differently) to confirm successful pairing.

This image illustrates the programming sequence: entering a passcode, then specific number combinations (55#, 01#), and finally pressing the 'Learn' button on the gate opener's control board.

6.2 Setting Access Codes

The keypad supports up to 11 different access codes. These can be stored in two routes:

• Rotta 1: Stores up to 8 passwords.
• Rotta 2: Stores up to 3 passwords.

Refer to your gate opener's specific manual for detailed instructions on how to add, modify, or delete individual access codes after the keypad is paired.

The keypad supports up to 11 different access codes, allowing multiple users. Channel 1 specifically controls single gate motor 2.

7. Operazzjoni

7.1 Użu ta 'Kuljum

To operate your gate opener using the keypad:

1. Enter your programmed access code.
2. Agħfas il-buttuna '#' biex tikkonferma.
3. The gate opener will activate.

7.2 Anti-Peeping Password Feature

For enhanced security, you can enter random digits before or after your actual passcode. The system will only recognize the correct sequence of your programmed code within the longer entry.

To enhance security, the keypad supports an anti-peeping function where random digits can be entered before or after the correct passcode. Incorrect entries three times will trigger an alarm and deactivate the keypad for two minutes.

8. Karatteristiċi ewlenin

• Sensitive Touch Panel: The keypad features an ultra-responsive and durable touch interface.


The keypad features an ultra-responsive, silky touch panel designed for durability and corrosion resistance.

• Weather Resistance (IP55): Designed to withstand outdoor elements, the keypad has an IP55 protection rating against dust and water splashes.

Designed for outdoor use, the keypad has an IP55 protection rating, ensuring reliable operation even in rainy conditions.
• Tastiera backlit: The numeric display is backlit for clear visibility and ease of use in low-light conditions.


The keypad features a backlit touch keyboard with a high-definition numeric display for visibility in low-light conditions.

• Allarm tas-Sigurtà: After 3 consecutive incorrect password entries, the keypad will trigger an alarm and deactivate for two minutes to prevent unauthorized access.

9. Manutenzjoni

• Tindif: Wipe the keypad surface with a soft, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu.
• Sostituzzjoni tal-batterija: Replace all 8 AA batteries when the low battery indicator appears or if the keypad becomes unresponsive. Ensure correct polarity.
• Kontrolli regolari: Periodically check the mounting screws for tightness and ensure the protective cover is intact.

10 Issolvi l-problemi

11. Garanzija u Appoġġ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official JUJIANG websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.