1. Introduzzjoni
Thank you for choosing the DAKASON 4FT Vapor Tight LED Light with Motion Sensor. This fixture is designed for durability and efficiency in challenging environments. It features adjustable wattage, an IP65 waterproof rating, and integrated motion and daylight sensors for optimized energy consumption.
This manual provides essential information for the safe installation, operation, and maintenance of your LED light fixture. Please read it thoroughly before installation and keep it for future reference.
2. Informazzjoni dwar is-Sigurtà
- TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija qabel l-installazzjoni jew is-servizz.
- L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi nazzjonali u lokali kollha.
- Tiżgura l-provvista voltage is compatible with the fixture's requirements (100-277V AC).
- Do not handle live wires. Always use appropriate personal protective equipment.
- Do not modify the fixture or use it for purposes other than its intended use.
- Żomm materjali fjammabbli 'l bogħod mill-apparat waqt it-tħaddim.
- This fixture is rated IP65 for dust and water jet protection. Ensure all connections are properly sealed during installation to maintain this rating.
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti u mhux imħassra qabel ma tipproċedi bl-installazzjoni.
- 1 x DAKASON 4FT Vapor Tight LED Light Fixture
- 2 x V-hooks
- 2 x Parentesi tal-Immuntar
- 4 x Plastic Wall Plugs
- 4 x Viti
- 4 x Gaskits
Figure 3.1: Included Mounting Kit and Components
4. Speċifikazzjonijiet
| Brand | DAKASON |
| Isem tal-Mudell | Dawl Issikkat tal-Fwar LED |
| Numru tal-Mudell | P4-54A-50 |
| Daqs | 4FT (47.2 inches) |
| Wattage | Adjustable: 40W / 50W / 60W |
| Luminożità | Sa 6600 Lumens (f'60W) |
| Effiċjenza | 110 lumens għal kull watt |
| Voltage | 100-277V AC |
| Temperatura tal-Kulur | 5000 Kelvin (abjad kiesaħ) |
| Klassifikazzjoni tal-IP | IP65 (Waterproof, Dust-tight) |
| Materjal | Polycarbonate (PC) housing and lens |
| Karatteristiċi Speċjali | Dimmable, Motion Sensor, Photocell (Daylight Sensor), Wattage Aġġustabbli |
| Tip ta 'Immuntar | Ceiling Mount / Wall Mount (Surface Mount) |
| Ċertifikazzjonijiet | Elenkat UL |
| It-tul tal-ħajja | 50,000 sigħat |
| Dimensjonijiet tal-Prodott | 47.2"T x 3.74"W x 3.38"Għ |
| Piż tal-oġġett | 4.74 liri |
5. Setup u Installazzjoni
Before beginning installation, ensure the power supply is turned off at the circuit breaker. This fixture is designed for surface mounting on ceilings or walls.
5.1. Immuntar tal-Apparat
- Ipprepara l-Wiċċ tal-Immuntar: Choose a suitable location for the fixture. Mark the drilling points for the mounting brackets using the fixture as a guide.
- Installa l-parentesi tal-immuntar: Drill pilot holes at the marked locations. Insert the plastic wall plugs (if needed for drywall/masonry) and secure the mounting brackets to the surface using the provided screws. Ensure the brackets are firmly attached.
- Sikura l-Armatura: Carefully align the fixture with the installed mounting brackets and secure it in place. The fixture can be clipped into the brackets.
Figure 5.1: Fixture Components and Mounting Points
Figura 5.2: Eżample of Fixture Installation
5.2. Wiring Elettriku
Ensure power is OFF before wiring. The fixture is designed for 100-277V AC input. Connect the supply wires to the fixture's internal wiring terminals:
- Qabbad il- Ħaj (Iswed) wire from the power supply to the fixture's Live terminal.
- Qabbad il- Newtrali (Abjad) wire from the power supply to the fixture's Neutral terminal.
- Qabbad il- Ground (Green/Bare Copper) wire from the power supply to the fixture's Ground terminal.
Use the waterproof cable gland to ensure a sealed entry point for the wiring, maintaining the IP65 rating.
Figure 5.3: Internal Wiring and Driver
6. Operazzjoni u Settings
The DAKASON LED Vapor Tight Light features adjustable wattage and intelligent sensor controls. These settings are configured using dip switches located inside the fixture.
6.1. Wattage Aġġustament
The fixture allows you to select between three wattage outputs: 40W, 50W, and 60W. This adjusts the light output (lumens) accordingly.
- 40W: Madwar 4400 lumens
- 50W: Madwar 5500 lumens
- 60W: Madwar 6600 lumens
Biex taġġusta l-wattage, sib il-wattage selection switch inside the fixture and set it to your desired output. Ensure power is disconnected before making adjustments.
Figura 6.1: Wattage Options and Selection
6.2. Issettjar tas-Sensor tal-Mozzjoni
The integrated motion sensor allows for automatic lighting control based on presence. Settings are configured via dip switches.
Figure 6.2: Motion Sensor Dip Switch Panel
Refer to the diagram on the fixture's sensor module for specific dip switch positions. Key settings include:
- Sensittività tas-Sejbien: Adjusts how easily the sensor detects motion (e.g., 50% or 100%).
- Żomm Ħin: The duration the light stays at 100% brightness after motion is detected and then ceases (e.g., 5s, 90s, 5min, 10min).
- Perjodu Stand-by: The duration the light remains at a dimmed level after the hold time expires and before turning completely off (e.g., 0s, 10s, 15min, +∞ for always on at dim level).
- Livell ta' Dimming Stand-by: The brightness level during the stand-by period (e.g., 20% or 30%).
- Modalità tas-Sensor: Allows enabling or disabling the motion sensor function entirely.
Example of Motion Sensor Logic:
Figure 6.3: Motion Sensor Operation Flow
6.3. Daylight Sensor (Photocell)
The daylight sensor (photocell) automatically controls the light based on ambient light levels, saving energy during daylight hours.
- Daylight Priority Technology: The sensor will turn on the light fixture when ambient light is below 50 Lux (dusk), even without motion.
- When ambient light is above 50 Lux (dawn), the sensor will switch off the light fixture, even if motion is detected.
- The daylight sensor function can be disabled via a dip switch if not required.
Figure 6.4: Daylight Sensor Auto On/Off
7. Manutenzjoni
The DAKASON LED Vapor Tight Light is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.
- Tindif: Skonnettja l-provvista tal-enerġija qabel it-tindif. Imsaħ l-apparat b'ċarruta ratba u nadifa.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing and lens.
- Spezzjoni: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the stainless-steel hasps and clips are securely fastened to maintain the vapor-tight seal.
- LEDs: The LEDs are maintenance-free and have a lifespan of 50,000 hours. They are not user-replaceable.
8 Issolvi l-problemi
If you encounter issues with your DAKASON LED Vapor Tight Light, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | No power supply; incorrect wiring; sensor disabled or misconfigured; ambient light too high. | Check circuit breaker and wiring connections. Verify sensor settings (Daylight Sensor, Sensor Mode). Ensure ambient light is below 50 Lux if Daylight Sensor is enabled. |
| Light stays on continuously or for too long. | Motion sensor Hold Time or Stand-by Period set too long or to infinite (+∞); constant motion in detection area; sensor malfunction. | Adjust Hold Time and Stand-by Period dip switches. Ensure no continuous motion is triggering the sensor. If issue persists, contact support. |
| Light turns on/off too frequently or is too sensitive. | Motion sensor sensitivity set too high; environmental factors (e.g., small animals, moving objects, vibrations). | Reduce the Detection Sensitivity setting on the dip switch. Consider the mounting location to minimize false triggers. |
| Teptip ħafif. | Incompatible dimmer switch (this fixture is not designed for external dimmers); power supply instability; rare individual sensitivity to LED refresh rates. | Ensure no external dimmer switches are used. Check power supply stability. While most users do not perceive flicker, some individuals may be more sensitive to the inherent refresh rate of LED lighting. |
| Id-dawl mhux qawwi biżżejjed. | Wattage setting is too low; Stand-by Dimming Level is active. | Aġġusta l-wattage selection switch to a higher setting (e.g., 60W). Check motion sensor settings to ensure the light is not in a dimmed stand-by state. |
9. Garanzija u Appoġġ
The DAKASON LED Vapor Tight Light is backed by a garanzija ta 'sena, ensuring its quality and performance. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact DAKASON customer support. Provide your purchase details and model number (P4-54A-50) when contacting support to expedite assistance.
You can typically find contact information for the seller or manufacturer through your purchase platform or the DAKASON official websit.
